Make use of flower_port_attr_type() safe:
* flower_port_attr_type() may return a valid index into tb[] or -1.
Only access tb[] in the case of the former.
* Do not access null entries in tb[]
Also make usage silent - it is valid for ip_proto to be invalid,
for example if it is not specified as part of the filter.
Fixes: a1fb0d4842 ("tc: flower: Support matching on SCTP ports")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Remove references to eth_type and ether_type (spelling error) in
the tc flower manpage.
Also correct formatting of boldface text with whitespace.
Cc: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Initialise for loops outside of for loops. GCC flags this as being
out of spec unless C99 or C11 mode is used.
With this change the entire tree appears to compile cleanly with -Wall.
$ gcc --version
gcc (Debian 4.9.2-10) 4.9.2
...
$ make
...
ss.c: In function ‘unix_show_sock’:
ss.c:3128:4: error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode
...
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
A struct with only a single field does not make much sense. Besides
that, it was used by print_summary() only.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This function is used only at a single place anymore, so replace the
call to it by it's content, which makes that specific part of
unix_show() consistent with e.g. tcp_show().
Signed-off-by: Phil Sutter <phil@nwl.cc>
Although this complicates the dedicated procfs-based code path in
unix_show() a bit, it's the only sane way to get rid of unix_show_sock()
output diverging from other socket types in that it prints all socket
details in a new line.
As a side effect, it allows to eliminate all procfs specific code in
the same function.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This consolidates identical code in three places. While the function
name is not quite perfect as there is different proc_ctx printing code
in netlink_show_one() as well, I sadly didn't find a more suitable one.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Unix sockets used that field already to hold info about the socket type.
By replicating this approach in all other socket types, we can get rid
of protocol parameter in inet_stats_print() and have sock_state_print()
figure things out by itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When dumping UNIX sockets and show_details is active but not show_mem
(ss -xne), the socket details are printed without being prefixed by tab.
Fix this by printing the tab character when either one of '-e' or '-m'
has been specified.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When dumping UDP sockets and show_tcpinfo (-i) is active but not
show_mem (-m), print_tcpinfo() does not output anything leading to an
empty line being printed after every socket. Fix this by skipping the
call to print_tcpinfo() and the previous newline printing in that case.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Dump some new fields added to tcp_info in v4.10: tcpi_busy_time,
tcpi_rwnd_limited, tcpi_sndbuf_limited.
Example output for a flow busy for 110ms but never measurably limited by
receive window or send buffer:
busy:110ms
Example output for a flow usually limited by receive window:
busy:111ms rwnd_limited:101ms(91.0%)
Example output for a flow sometimes limited by send buffer:
busy:50ms sndbuf_limited:10ms(20.0%)
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Dump the new delivery_rate and delivery_rate_app_limited fields that
were added to tcp_info in Linux v4.9.
Example output:
pacing_rate 65.7Mbps delivery_rate 62.9Mbps
And for the application-limited case this looks like:
pacing_rate 1031.1Mbps delivery_rate 87.4Mbps app_limited
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
unix, tcp, udp[lite], packet, netlink sockets already support diag
interface for their collection and killing. Implement support
for raw sockets.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
In case if some diag module is not present in the system,
say the kernel is not modern enough, we simply skip the
error code reported. Instead we should check for data
length in NLMSG_DONE and process unsupported case.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
In case of an older kernel that doesn't set L2TP_ATTR_UDP_ZERO_CSUM6_{RX,TX}
the old hard-coded value is being preserved, since the attribute flag will be
missing.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_UDP_CSUM is read by the kernel as a NLA_FLAG value,
but is validated as a NLA_U8, so we will write it as an u8,
but the value isn't actually being read by the kernel.
It is written by the kernel as a NLA_U8, so we will read as
such.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_RECV_SEQ and L2TP_ATTR_SEND_SEQ are declared as NLA_U8
attributes in the kernel, so let's threat them accordingly.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
udp6_csum_{tx,rx}, tunnel and session are the only ones
currently used.
recv_seq, send_seq, lns_mode and data_seq are partially
implemented in a useless way.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
