This change allows to exec some cmd on each
named netns (except default) by specifying '-all' option:
# ip -all netns exec ip link
Each command executes synchronously.
Exit status is not considered, so there might be a case
that some CMD can fail on some netns but success on the other.
EXAMPLES:
1) Show link info on all netns:
$ ip -all netns exec ip link
netns: test_net
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether 1a:19:6f:25:eb:85 brd ff:ff:ff:ff:ff:ff
netns: home0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether ea:1a:59:40:d3:29 brd ff:ff:ff:ff:ff:ff
netns: lan0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether ce:49:d5:46:81:ea brd ff:ff:ff:ff:ff:ff
2) Set UP tap0 device for the all netns:
$ ip -all netns exec ip link set dev tap0 up
netns: test_net
netns: home0
netns: lan0
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Added another timestamp format to look like more logging info:
[2014-12-22T22:36:50.489 ] 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default
link/ether 3c:97:0e:a3:86:2e brd ff:ff:ff:ff:ff:ff
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
The RTM_NEWLINK message accepts ifi_index non-zero value and lets
creation of links with given index (if it's free, or course). This
functionality is available since linux-v3.5.
This patch makes this API available via ip tool.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
The kernel already supports it, so add the support
to iproute2 as well.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
The default remains at 10 for backwards compatibility.
For instance:
# ip addr flush dev eth2
*** Flush remains incomplete after 10 rounds. ***
# ip -l 20 addr flush dev eth2
*** Flush remains incomplete after 20 rounds. ***
# ip -loops 0 addr flush dev eth2
#
This is useful for getting rid of large numbers of IP
addresses in scripts.
Signed-off-by: Ben Greear <greearb@candelatech.com>
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
This routine parses CLI attributes, describing generic link
parameters such as name, address, etc.
This is mostly copy-pasted from iplink_modify().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
The problem was that length of allocation changed but caller not told.
Anyway, the patch fixes a problem resulting in a double free
that occurs when using batch files that contains a special combination
of broken up lines and comments as reported in:
http://bugs.debian.org/398912
Thanks to Michal Pokrywka <mpokrywka@hoga.pl> for testcase and information
on which conditions problem could be reproduced under.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Enable users of ip to specify the times for rtt, rttvar and rto_min
in human-friendly terms a la "tc" while maintaining backwards
compatability with the previous "raw" mechanism. Builds upon
David Miller's uncommited patch to set rto_min.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
cheers,
jamal
[GENERAL] nl_mgrp to crap if base multicast groups exceeded
The old scheme of bitmasks works only for the first 32 groups.
Above that the setsockopt scheme must be used.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[utils] make muticast group to bitmask conversion generic
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
