In this commit, we list the monitor attributes. By default it lists
the attributes for all bearers, otherwise the specified bearer.
A sample usage is shown below:
$ tipc link monitor list
bearer eth:data0
node status monitored generation applied_node_status [non_applied_node:status]
1.1.1 up direct 16 UU []
1.1.2 up direct 16 UU []
1.1.3 up direct 16 UU []
bearer eth:data1
node status monitored generation applied_node_status [non_applied_node:status]
1.1.1 up direct 2 UU []
1.1.2 up direct 3 UU []
1.1.3 up direct 3 UU []
$ tipc link monitor list media eth device data0
bearer eth:data0
node status monitored generation applied_node_status [non_applied_node:status]
1.1.1 up direct 16 UU []
1.1.2 up direct 16 UU []
1.1.3 up direct 16 UU []
$ tipc link monitor list -h
Usage: tipc monitor list [ media MEDIA ARGS...]
MEDIA
udp - User Datagram Protocol
ib - Infiniband
eth - Ethernet
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
In this commit, we:
1. Export print_bearer_media()
2. Move the bearer name handling from nl_add_bearer_name() into
a new function cmd_get_unique_bearer_name().
These exported functions will be used by link monitor used in
subsequent commits.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
The monitor summary command prints the basic attributes
specific to the local node.
A sample usage is shown below:
$ tipc link monitor summary
bearer eth:data0
table_generation 15
cluster_size 8
algorithm overlapping-ring
bearer eth:data1
table_generation 15
cluster_size 8
algorithm overlapping-ring
$ tipc link monitor summary -h
Usage: tipc monitor summary
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
The command prints the monitor activation threshold.
A sample usage is shown below:
$ tipc link monitor get threshold
32
$ tipc link monitor get -h
Usage: tipc monitor get PPROPERTY
PROPERTIES
threshold - Get monitor activation threshold
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
The command sets the activation threshold for the new
cluster ring supervision.
A sample usage is shown below:
$ tipc link monitor set threshold 4
$ tipc link monitor set -h
Usage: tipc monitor set PPROPERTY
PROPERTIES
threshold SIZE - Set activation threshold for monitor
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
In this patch we introduce the ability to get UDP specific bearer
options such as remoteip, remoteport, localip and localport.
After some discussions on tipc-discussion on how to handle media
specific options we agreed to pass them after the media.
For media generic bearer options we already do:
$ tipc bearer get OPTION media MEDIA name|device NAME|DEVICE
For the UDP media specific bearer options we introduce in this path:
$ tipc bearer get media udp name NAME OPTION
such as
$ tipc bearer get media udp name NAME remoteip
This allows bash-completion to tab complete only appropriate options,
it makes more logical sense and it scales better. Even though it might
look a little different to the user.
In order to use the existing option parsing framework to do this we
add a flag (OPT_KEY) to the option parsing function.
If the UDP bearer has multiple remoteip addresses associated with it
(replicast) we handle the TIPC_NLA_UDP_MULTI_REMOTEIP flag and send
a TIPC_NL_UDP_GET_REMOTEIP query transparently to the user.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Introduce the ability to add remote IP addresses to an existing UDP
bearer. On the kernel side, adding a "remoteip" to an existing bearer
puts the bearer in "replicast" mode where TIPC multicast messages are
send out to each configured remoteip using unicast. This is required
for TIPC UDP bearers to work in environments where IP multicast is
disabled.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
This functionality was first merged in:
f9dec657e4 (Richard Alpe tipc: add peer remove functionality)
And later backed out (as the kernel counterpart was held up) in:
385caeb13b (Stephen Hemminger Revert "tipc: add peer remove functionality")
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Introduce a generic function (nl_add_bearer_name()) that identifies a
bearer and adds it to an existing netlink message. This reduces code
complexity and makes the code a little bit easier to maintain.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Similar to the Linux kernel and perf add infrastructure to reduce the
amount of output tossed to a user during a build. Full build output
can be obtained with 'make V=1'
Builds go from:
make[1]: Leaving directory `/home/dsa/iproute2.git/lib'
make[1]: Entering directory `/home/dsa/iproute2.git/ip'
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ip.o ip.c
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ipaddress.o ipaddress.c
to:
...
AR libutil.a
ip
CC ip.o
CC ipaddress.o
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
tipc is a user-space configuration tool for TIPC (Transparent
Inter-process Communication). It utilizes the TIPC netlink API in the
kernel to fetch data or perform actions.
The tipc tool has somewhat similar syntax to the ip tool meaning that
users of the ip tool should not feel that unfamiliar with this tool.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
