Currently new json object opens (and delete_json_obj closes) the object as
an array, what adds prints for the matching bracket '[' ']' at the
start/end of the object. This patch adds new_json_obj_plain() and the
matching delete_json_obj_plain() to enable opening and closing json object,
not as array and leave it to the using function to decide which type of
object to open/close as the main object.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Until now print_#type functions supported printing constant names and
unknown (variable) values only.
Add functions to allow printing when the name is also sent to the
function as a variable.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stephen converted macsec's sci to use 0xhex, but 0xhex handles
unsigned int's, not 64 bits ints. Thus, the output of the "ip macsec
show" command is mangled, with half of the SCI replaced with 0s:
# ip macsec show
11: macsec0: [...]
cipher suite: GCM-AES-128, using ICV length 16
TXSC: 0000000001560001 on SA 0
# ip -d link show macsec0
11: macsec0@ens3: [...]
link/ether 52:54:00:12:01:56 brd ff:ff:ff:ff:ff:ff promiscuity 0
macsec sci 5254001201560001 [...]
where TXSC and sci should match.
Fixes: c0b904de62 ("macsec: support JSON")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The json print library was toggling pretty print at the end of
an array to workaround a bug in underlying json_writer.
Instead, just fix json_writer to pretty print array correctly.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
As Stephen Hemminger mentioned on the last submission the new_json_obj
function is always called with fp == stdout, so right now, there's no
need of this extra argument.
The background for the rework is the following:
The ip monitor didn't call `new_json_obj` (even for in non json context),
so the static FILE* _fp variable wasn't initialized, thus raising a
SIGSEGV in ipaddress.c. This patch should fix this issue for good, new
paths won't have to call `new_json_obj`.
How to reproduce:
$ ip -t mon label link
(gdb) bt
.#0 _IO_vfprintf_internal (s=s@entry=0x0, format=format@entry=0x45460d “%d: “, ap=ap@entry=0x7fffffff7f18) at vfprintf.c:1278
.#1 0x0000000000451310 in color_fprintf (fp=0x0, attr=<optimized out>, fmt=0x45460d “%d: “) at color.c:108
.#2 0x000000000044a856 in print_color_int (t=t@entry=PRINT_ANY, color=color@entry=4294967295, key=key@entry=0x4545fc “ifindex”,
fmt=fmt@entry=0x45460d “%d: “, value=<optimized out>) at ip_print.c:132
.#3 0x000000000040ccd2 in print_int (value=<optimized out>, fmt=0x45460d “%d: “, key=0x4545fc “ifindex”, t=PRINT_ANY) at ip_common.h:189
.#4 print_linkinfo (who=<optimized out>, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipaddress.c:1107
.#5 0x0000000000422e13 in accept_msg (who=0x7fffffff8320, ctrl=0x7fffffff8310, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipmonitor.c:89
.#6 0x000000000044c58f in rtnl_listen (rtnl=0x672160 <rth>, handler=handler@entry=0x422c70 <accept_msg>, jarg=0x7ffff77a82a0 <_IO_2_1_stdout_>)
at libnetlink.c:761
.#7 0x00000000004233db in do_ipmonitor (argc=<optimized out>, argv=0x7fffffffe5a0) at ipmonitor.c:310
.#8 0x0000000000408f74 in do_cmd (argv0=0x7fffffffe7f5 “mon”, argc=3, argv=0x7fffffffe588) at ip.c:116
.#9 0x0000000000408a94 in main (argc=4, argv=0x7fffffffe580) at ip.c:311
Fixes: 6377572f ("ip: ip_print: add new API to print JSON or regular format output")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Move the json printer which is based on json writer into the
iproute2 library, so it can be used by library code and tools
other than ip. Should probably have been done from the beginning
like that given json writer is in the library already anyway.
No functional changes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Julien Fortin <julien@cumulusnetworks.com>
