Debian maintainer found that basic command:
# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
Recently behavior of "default" prefix parameter was corrected. But at
the same time behavior of "all"/"any" was altered too, because they
were the same branch of the code. As those parameters mean different,
they need to be treated differently in code too. This patch reflects
the difference.
Also after mentioned change, address parsing code was changed more
and address family was set explicitly even for "all"/"any" addresses.
And that broke matching conditions further. This patch fixes that too
and returns AF_UNSPEC to "all"/"any" address.
Now "default" is treated as top-level prefix (for example 0.0.0.0/0 in
IPv4) and "all"/"any" always matches anything in exact, root and match
modes.
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Alexander Zubkov <green@msu.ru>
This reverts commit 9135c4d603.
Debian maintainer found that basic command:
# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The vxlan driver when a neighbor add/delete event occurs sends
NDA_DST filled with a union:
union vxlan_addr {
struct sockaddr_in sin;
struct sockaddr_in6 sin6;
struct sockaddr sa;
};
This eventually calls rt_addr_n2a_r which had no handler for the
AF_BRIDGE family and "???" was being printed.
Add code to properly display this data when requested.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
First is used to get address from netlink attribute to
inet_prefix data structure. Use memcpy() with constant
value to let complier optimize by replacing a call by
inlining load/store instructions.
Second is used to match address in given netlink attribute
with one given as reference. It matches successfully if
no attribute is given (@rta is NULL), reference address
family is AF_UNSPEC or it's length isn't given; fails if
get_attr_rta() can't get attribute or it's family does
not match reference; calls inet_addr_match() to get final
verdict.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
It looks very useful to receive additional information
from get_addr_1() and get_addr() about address to simplify
caller and get rid of code duplications.
For now following information can be returned:
1) address is unspecified (zero)
2) address is multicast
3) address is internet: family is either AF_INET or
AF_INET6.
More information can be added in the future.
Introduce inline helpers to make code using this new
address classification interface more self explaining:
bool is_addrtype_inet(inet_prefix *addr)
true if @addr is inet address
bool is_addrtype_inet_unspec(inet_prefix *addr)
true if @addr is unspecified inet address
bool is_addrtype_inet_multi(inet_prefix *addr)
true if @addr is multicast inet address
bool is_addrtype_inet_not_unspec(inet_prefix *addr)
true if @addr is not unspecified inet address
false if @addr is not inet or unspecified inet
bool is_addrtype_inet_not_multi(inet_prefix *addr)
true if @addr is not multicast inet address
false if @addr is not inet or multicast inet
Last two are useful for case when we need inet address
that is not unspecified or multicast.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Handle default/all/any special case in get_addr_1() to setup
->family and ->bytelen correctly.
Make get_addr_1() return ->bitlen == -2 instead of -1 to
distinguish default/all/any special case from the rest:
it is safe because all callers check ->bitlen < 0, not
explicit value -1.
Reduce intendation by one level and get rid of goto/label
to make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Set ->family correctly when string representing address
is "default", "all" or "any": get_addr_1() might be called
with AF_UNSPEC (e.g. get_addr() -> get_addr_1()).
Extend support for zero address to all address families,
not only AF_INET and AF_INET6 when one explicitly given
as @family: use af_byte_len() to correctly set address length.
Still assume AF_INET when @family is AF_UNSPEC.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When running "ip route list default" and not specifying address family,
one will get all of the routes instead of just default only. The same
is for "exact default" and "match default".
It behaves in such a way because default route with unspecified family
has the same all-zeroes value like no prefix specified at all. Thus
following code blindly ignores the fact, that prefix was actually
specified.
This patch adds the flag PREFIXLEN_SPECIFIED to the default route too.
And then checks its value when filtering routes.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The makeargs() function did not handle end of string correctly
and would reference past end of string.
Found by fuzzing with ASAN.
Reported-by:Bug Basher <iamliketohack@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
Any iproute utility that uses any function from lib/utils.c needs
to declare its own resolve_hosts variable instance although it does
not need/use hostname resolving functionality (currently only 'ip'
and 'ss' commands uses this).
The patch declares single common instance of resolve_hosts directly
in utils.c so the existing ones can be removed (the same approach
that is used for timestamp_short).
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Keep it as simple as possible for now: just escape anything that is not
isprint-able, is among the "escape" parameter or '\' as an octal escape
sequence. This should be pretty easy to extend if any other user needs
something more complex in the future.
Signed-off-by: Ivan Delalande <colona@arista.com>
Some C libraries, like uClibc and musl, provide BSD compatible
strlcpy(). Add check_strlcpy() to configure, and avoid defining strlcpy
and strlcat when the C library provides them.
This fixes the following static link error with uClibc-ng:
.../sysroot/usr/lib/libc.a(strlcpy.os): In function `strlcpy':
strlcpy.c:(.text+0x0): multiple definition of `strlcpy'
../lib/libutil.a(utils.o):utils.c:(.text+0x1ddc): first defined here
collect2: error: ld returned 1 exit status
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Signed-off-by: Phil Sutter <phil@nwl.cc>
As David Laight correctly pointed out, the first version of strlcpy()
modified dst buffer behind the string copied into it. Fix this by
writing NUL to the byte immediately following src string instead of to
the last byte in dst. Doing so also allows to reduce overhead by using
memcpy().
Improve strlcat() by avoiding the call to strlcpy() if dst string is
already full, not just as sanity check.
Signed-off-by: Phil Sutter <phil@nwl.cc>
By making use of strncpy(), both implementations are really simple so
there is no need to add libbsd as additional dependency.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Both functions take the desired address family as a parameter. So using
that to notify the user what address family was expected is correct,
unlike using dst->family which will tell the user only what address
family was specified.
The situation which commit 334af76143 tried to fix was when 'ip'
would accept addresses from multiple families. In that case, the family
parameter is set to AF_UNSPEC so that get_addr_1() may accept any valid
address.
This patch introduces a wrapper around family_name() which returns the
string "any valid" for AF_UNSPEC instead of the three question marks
unsuitable for use in error messages.
Tests for AF_UNSPEC:
| # ip a a 256.10.166.1/24 dev d0
| Error: any valid prefix is expected rather than "256.10.166.1/24".
| # ip neighbor add proxy 2001:db8::g dev d0
| Error: any valid address is expected rather than "2001:db8::g".
Tests for explicit address family:
| # ip -6 addrlabel add prefix 1.1.1.1/24 label 123
| Error: inet6 prefix is expected rather than "1.1.1.1/24".
| # ip -4 addrlabel add prefix dead:beef::1/24 label 123
| Error: inet prefix is expected rather than "dead:beef::1/24".
Reported-by: Jaroslav Aster <jaster@redhat.com>
Fixes: 334af76143 ("fix get_addr() and get_prefix() error messages")
Signed-off-by: Phil Sutter <phil@nwl.cc>
When we get a multicast route, the rtm_type is RTN_MULTICAST, but the
rtm_family may be AF_INET. If we only check the type with RTNL_FAMILY_IPMR,
we will get malformed address. e.g.
+ ip -4 route add multicast 172.111.1.1 dev em1 table main
Before fix:
+ ip route list type multicast table main
multicast ac6f:101:800:400:400:0:3c00:0 dev em1 scope link
After fix:
+ ip route list type multicast table main
multicast 172.111.1.1 dev em1 scope link
Fixes: 56e3eb4c34 ("ip: route: fix multicast route dumps")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Kernel now supports up to 30 labels but not defined as part of the uapi.
iproute2 handles up to 8 labels but in a non-consistent way. Update ip
to handle more labels, but in a more programmatic way.
For the MPLS address family, the data field in inet_prefix is used for
labels. Increase that field to 64 u32's -- 64 as nothing more than a
convenient power of 2 number.
Update mpls_pton to take the length of the address field, convert that
length to number of labels and add better error handling to the parsing
of the user supplied string.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
A recent cleanup causes a compile warning on Debian jessie:
CC utils.o
utils.c: In function ‘get_addr_1’:
utils.c:486:21: warning: passing argument 1 of ‘ll_addr_a2n’ from incompatible pointer type
len = ll_addr_a2n(&addr->data, sizeof(addr->data), name);
^
In file included from utils.c:34:0:
../include/rt_names.h:27:5: note: expected ‘char *’ but argument is of type ‘__u32 (*)[8]’
int ll_addr_a2n(char *lladdr, int len, const char *arg);
^
Revert the removal of the typecast
Fixes: e1933b9281 ("utils: cleanup style")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
strtoul() only modifies errno on overflow, so if errno is not zero
before calling the function its value is preserved and makes the
function fail for valid inputs; initialize it.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
An attempt to add invalid address to interface would print "???" string
instead of the address family name.
For example:
$ ip address add 256.10.166.1/24 dev ens8
Error: ??? prefix is expected rather than "256.10.166.1/24".
$ ip neighbor add proxy 2001:db8::g dev ens8
Error: ??? address is expected rather than "2001:db8::g".
With this patch the output will look like:
$ ip address add 256.10.166.1/24 dev ens8
Error: inet prefix is expected rather than "256.10.166.1/24".
$ ip neighbor add proxy 2001:db8::g dev ens8
Error: inet6 address is expected rather than "2001:db8::g".
Signed-off-by: Przemyslaw Szczerbik <przemyslawx.szczerbik@intel.com>
Signed-off-by: Marco Varlese <marco.varlese@intel.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch:
- Adds a utility function for parsing a 64 bit address
- Adds a utility function for converting a 64 bit address to ASCII
- Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>
Instead of statically complaining about illegal inet address, use
get_family() to get the address family right.
Based on a patch by Hangbin Liu to print "inet6" for AF_INET6 made more
generic by me.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Fixes a typo in get_prefix_1() which broke the prefix default
names { default | any | all }.
The most obvious fallout from this bug was:
$ ip route add default via 1.1.1.1
Error: an inet prefix is expected rather than "default".
Fixes: dacc5d4197 ("add basic mpls support to iproute")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
- Pull in the uapi mpls.h
- Update rtnetlink.h to include the mpls rtnetlink notification multicast group.
- Define AF_MPLS in utils.h if it is not defined from elsewhere
as is done with AF_DECnet
The address syntax for multiple mpls labels is a complete invention.
When I looked there seemed to be no wide spread convention for talking
about an mpls label stack in text for. Sometimes people did:
"{ Label1, Label2, Label3 }", sometimes people would do:
"[ label3, label2, label1 ]", and most of the time label
stacks were not explicitly shown at all.
The syntax I wound up using, so it would not have spaces and so it
would visually distinct from other kinds of addresses is.
label1/label2/label3 Where label1 is the label at the top of the label
stack and label3 is the label at the bottom on the label stack.
When there is a single label this matches what seems to be convention
with other tools. Just print out the numeric value of the mpls label.
The netlink protocol for labels uses the on the wire format for a
label stack. The ttl and traffic class are expected to be 0. Using
the on the wire format is common and what happens with other address
types. BGP when passing label stacks also uses this technique with the
exception that the ttl byte is not included making each label in a BGP
label stack 3 bytes instead of 4.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add the functions family_name and read_family to convert an address
family to a string and to convernt a string to an address family.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For some address families (like AF_PACKET) it is helpful to have the
length when prenting the address.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
commit f3a2ddc124 ("lib utils: Use helpers to get AF bit/byte len")
used a wrong family or family of zero in the default case
during af_bit_len calculation causing ip route commands to
fail with below error
Error: an inet prefix is expected rather than "10.0.2.14/24".
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
