resource_path_parse() returns either zero or a negative error code,
hence the negated value must be passed to strerror().
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Typically the part of the flag in brackets completes the leading part
instead of repeating it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
CTRL_ATTR_FAMILY_ID is a u16, not a u32. Update devlink accordingly.
Fixes: a3c4b484a1 ("add devlink tool")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Devlink region allows access to driver defined address regions.
Each device can create its supported address regions and register
them. A device which exposes a region will allow access to it
using devlink.
This support allows reading and dumping regions snapshots as well
as presenting information such as region size and current available
snapshots.
A snapshot represents a memory image of a region taken by the driver.
If a device collects a snapshot of an address region it can be later
exposed using devlink region read or dump commands.
This functionality allows for future analyses on the snapshots.
The dump command is designed to read the full address space of a
region or of a snapshot unlike the read command which allows
reading only a specific section in a region/snapshot indicated by
an address and a length, current support is for reading and dumping
for a previously taken snapshot ID.
New commands added:
devlink region show [ DEV/REGION ]
devlink region delete DEV/REGION snapshot SNAPSHOT_ID
devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ]
devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ]
address ADDRESS length length
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for configuration parameters set and show.
Each parameter can be either generic or driver-specific.
The user can retrieve data on these configuration parameters by devlink
param show command and can set new value to a configuration parameter
by devlink param set command.
The configuration parameters can be set in different configuration
modes:
runtime - set while driver is running, no reset required.
driverinit - applied while driver initializes, requires restart
driver by devlink reload command.
permanent - written to device's non-volatile memory, hard reset
required to apply.
New commands added:
devlink dev param show [DEV name PARAMETER]
devlink dev param set DEV name PARAMETER value VALUE
cmode { permanent | driverinit | runtime }
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since commit 049c58539f ("devlink: mnlg: Add support for extended ack")
devlink requires NETLINK_{CAP,EXT}_ACK. This prevents devlink from
working with older kernels that don't support these features.
host # ./devlink/devlink
Failed to connect to devlink Netlink
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
(u64)-1 essentially means the size is unlimited. Print as 'unlimited'
as opposed to the current unsigned int range of 4294967295.
Signed-off-by: David Ahern <dsahern@gmail.com>
The current code doesn't set errno in case of extended ack.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Dpipe - Each dpipe table can have one resource which is mapped to it.
The resource is presented via its full path. Furthermore, the number
of units consumed by single table entry is presented.
Resource - Each resource presents the dpipe tables that use it.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for hot reload. It should be used in order for resource
updates to take place.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for devlink resource abstraction. The resources are
represented by a tree based structure and are identified by a name and
a size. Some resources can present their real time occupancy.
First the resources exposed by the driver can be observed, for example:
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry
resources:
name linear size 98304 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
Some resource's size can be changed. Examples:
$devlink resource set pci/0000:03:00.0 path /kvd/hash_single size 73088
$devlink resource set pci/0000:03:00.0 path /kvd/hash_double size 74368
The changes do not apply immediately, this can be validate by the 'size_new'
attribute, which represents the pending changed size. For example
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry size_valid false
resources:
name linear size 98304 size_new 147456 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
In case of a pending change the nested resources present an indication
for a valid configuration of its children (sum of its children sizes
doesn't exceed the parent's size).
In order for the changes to take place hot reload is needed. The hot
reload through devlink will be introduced in the following patch.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently multi-line objects are separated by new-lines. This patch
changes this behavior by using indentations for separation.
Signed-off-by: Arkadi Sharhsevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In case of extending the UAPI old packages would break.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leaving a variable with a generic name such as TARGETS undefined would lead
to Make picking up its value from the environment. Avoid this by always
defining TARGETS in the Makefiles.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for protocol IPv4/IPv6/Ethernet special formats.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
In case of global header (protocol header), the header:field ids are used
to perform lookup for special format printer. In case no printer existence
fallback to plain value printing.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
This patch decouples the match/action parsing from printing. This is
done as a preparation for adding the ability to print global header
values, for example print IPv4 address, which require special formatting.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
This renames Config to config.mk and includes more Make input.
Now configure generates all the required CFLAGS and LDLIBS for
the optional libraries.
Also, use pkg-config to test for libelf, rather than using a test
program. This makes it consistent with other libraries.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This function shouldn't fail because all callers of
__dl_argv_handle_port() make sure the passed string contains enough
slashes already, but better make sure if this changes in future the
function won't access uninitialized data.
Signed-off-by: Phil Sutter <phil@nwl.cc>
dl_argv_handle_both() will either assign to handle_bit or error out in
which case the variable is not used by the caller.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jiri Pirko <jiri@mellanox.com>
BIT() macro was implemented and used by devlink for now, but following
patches of rdmatool will reuse the same macro, so put it in common
header file.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is an e-switch global knob to enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
The actual encap/decap is carried out (along with the matching and other
actions) per offloaded e-switch rules, e.g as done when offloading the TC tunnel
key action.
Possible values are enable/disable.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Add support for pipeline debug (dpipe). The headers are used both the
gain visibillity into the headers supported by the hardware, and to
build the headers/field database which is used by other commands.
Examples:
First we can see the headers supported by the hardware:
$devlink dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta
field:
name erif_port bitwidth 32 mapping_type ifindex
name l3_forward bitwidth 1
name l3_drop bitwidth 1
Note that mapping_type is presented only if relevant. Also the header/
field id's are reported by the kernel they are not shown by default.
They can be observed by using the -v option. Also the headers scope
(global/local) is specified.
$devlink -v dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta id 0 global false
field:
name erif_port id 0 bitwidth 32 mapping_type ifindex
name l3_forward id 1 bitwidth 1
name l3_drop id 2 bitwidth 1
Second we can examine the tables supported by the hardware. In order
to dump all the tables no table name should be provided:
$devlink dpipe table show pci/0000:03:00.0
In order to examine specific table its name have to be specified:
$devlink dpipe table show pci/0000:03:00.0 name erif
pci/0000:03:00.0:
name mlxsw_erif size 800 counters_enabled true
match:
type field_exact header mlxsw_meta field erif_port mapping ifindex
action:
type field_modify header mlxsw_meta field l3_forward
type field_modify header mlxsw_meta field l3_drop
To enable/disable counters on the table:
$devlink dpipe table set pci/0000:03:00.0 name erif counters enable
$devlink dpipe table set pci/0000:03:00.0 name erif counters disable
In order to see the current entries in the hardware for specific table:
$devlink dpipe table dump pci/0000:03:00.0 name erif
pci/0000:03:00.0:
index 0 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 383 value 0
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
index 1 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 381 value 1
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
In the above example the table contains two entries which does match
on erif port and forwards the packet or drop it (currently only the
forward count is implemented). The counter values are provided for
example. In case the counting is not enabled on the table the counters
will not be available.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Currently the netlink attribute resolving is done by a sequence of
if's. Change the attribute resolving to table lookup.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Prior to parsing command options, the devlink tool allocates memory
to store results. In case of early exit (wrong parameters or version
check), this memory wasn't freed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Discovered by Phil's covscan. The final return statement is never reached.
This is not inherently clear from looking at the code, so change the
conditional to a switch() statement which should clarify this.
CC: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Implement kernel devlink e-switch interface. Currently we allow
to get and set the device e-switch mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Similar to the Linux kernel and perf add infrastructure to reduce the
amount of output tossed to a user during a build. Full build output
can be obtained with 'make V=1'
Builds go from:
make[1]: Leaving directory `/home/dsa/iproute2.git/lib'
make[1]: Entering directory `/home/dsa/iproute2.git/ip'
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ip.o ip.c
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ipaddress.o ipaddress.c
to:
...
AR libutil.a
ip
CC ip.o
CC ipaddress.o
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Use kernel shared buffer occupancy control commands to make snapshot and
clear occupancy watermarks. Also, allow to show occupancy values in a
nice way.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Implement kernel devlink shared buffer interface. Introduce new object
"sb" and allow to browse the shared buffer parameters and also change
configuration.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
