There is a need to distinguish between driver vs. general exposed
attributes. The most common use case is to expose some internal
garbage under extremely common and sexy name, e.g. pi, ci e.t.c
In order to achieve that, we will add "drv_" prefix to all strings
which were received through RDMA_NLDEV_ATTR_DRIVER_* attributes.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>a
Tested-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Globally replace all filter function in safer variants of those
is_filtered functions, which take into account the availability/lack
of netlink attributes.
Such conversion allowed to fix a number of places in the code, where
the previous implementation didn't honor filter requests if netlink
attribute wasn't present.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
If user provides specific index, we can speedup query
by using .doit callback and save full dump and filtering
after that.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Place check if netlink attribute available in general place,
instead of doing the same check in many paces.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor our the CM_ID print code.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Remove duplicated functions in favour general res_print_uint() call.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
RDMA subsystem is dual-licensed with "GPL-2.0 OR Linux-OpenIB" proper
license and Mellanox submission are supposed to have this type of license.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Logically separate resource QP logic to separate file,
in order to make PD specific logic self-contained.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Logically separate resource CM-ID logic to separate file,
in order to make CM-ID specific logic self-contained.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Logically separate resource CQ logic to separate file,
in order to make CQ specific logic self-contained.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Logically separate resource MR logic to separate file,
in order to make MR specific logic self-contained.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Logically separate resource PD logic to separate file,
in order to make PD specific logic self-contained.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow users to correlate allocated object with relevant parent
[leonro@server ~]$ rdma res show pd
dev mlx5_0 users 5 pid 0 comm [ib_core] pdn 1
dev mlx5_0 users 7 pid 0 comm [ib_ipoib] pdn 2
dev mlx5_0 users 0 pid 0 comm [mlx5_ib] pdn 3
dev mlx5_0 users 2 pid 548 comm ibv_rc_pingpong ctxn 0 pdn 4
[leonro@server ~]$ rdma res show cq cqn 0-100
dev mlx5_0 cqe 2047 users 6 poll-ctx UNBOUND_WORKQUEUE pid 0 comm [ib_core] cqn 2
dev mlx5_0 cqe 255 users 2 poll-ctx SOFTIRQ pid 0 comm [mlx5_ib] cqn 3
dev mlx5_0 cqe 511 users 1 poll-ctx DIRECT pid 0 comm [ib_ipoib] cqn 4
dev mlx5_0 cqe 255 users 1 poll-ctx DIRECT pid 0 comm [ib_ipoib] cqn 5
dev mlx5_0 cqe 255 users 0 poll-ctx SOFTIRQ pid 0 comm [mlx5_ib] cqn 6
dev mlx5_0 cqe 511 users 2 pid 548 comm ibv_rc_pingpong cqn 7 ctxn 0
[leonro@server ~]$ rdma res show mr
dev mlx5_0 mrlen 4096 pid 548 comm ibv_rc_pingpong mrn 4 pdn 0
[leonro@nps-server-14-015 ~]$ /images/leonro/src/iproute2/rdma/rdma res show qp
link mlx5_0/1 lqpn 0 type SMI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_0/1 lqpn 1 type GSI state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_0/1 lqpn 7 type UD state RTS sq-psn 0 pid 0 comm [ib_core]
link mlx5_0/1 lqpn 8 type UD state RTS sq-psn 0 pid 0 comm [ib_ipoib]
link mlx5_0/1 lqpn 9 pdn 4 rqpn 0 type RC state INIT rq-psn 0 sq-psn 0 path-mig-state MIGRATED pid 548 comm ibv_rc_pingpong
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is no need to keep same print functions for
uint32_t and uint64_t, unify them into one function.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel commit f794809a7259 ("IB/core: Add an unbound WQ type to the new CQ API")
added new CQ poll context type, reflect this change in rdmatool.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
mnl_attr_type_valid() receives maximum attribute type, which means that
we were supposed to supply the latest valid netlink attribute and not
the number of attributes. Such coding mistake caused to failures while
NLA attributes were extended.
Fixes: 74bd75c2b6 ("rdma: Add basic infrastructure for RDMA tool")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
CapabilityMask2 is defined in IBTA spec as a member of PortInfo.
Add translation to string of new CapabilityMask2 expansion of link caps.
The flags are concatenated to current caps print as seen in this example
printing EXT_INFO flag:
root@server-22 $ rdma -d link
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 2 sm_lid 2 lmc 0
state ACTIVE physical_state LINK_UP
caps: <SM, TRAP, SL_MAP, SYS_IMAGE_GUID, CABLE_INFO, EXTENDED_SPEEDS,
CAP_MASK2, CM, DEVICE_MGMT, VENDOR_CLASS, CAP_MASK_NOTICE,
CLIENT_REG, OTHER_LOCAL_CHANGES, MULT_PKER_TRAP, EXT_INFO>
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow compilation of rdmatool on 32-bits platforms.
rdma
CC rdma.o
CC utils.o
CC dev.o
CC link.o
In file included from rdma.h:26:0,
from dev.c:12:
dev.c: In function 'dev_caps_tostr':
../include/utils.h:269:38: warning: left shift count >= width of type [-Wshift-count-overflow]
#define BIT(nr) (1UL << (nr))
^
rdma.h:32:61: note: in expansion of macro 'BIT'
#define RDMA_BITMAP_ENUM(name, bit_no) RDMA_BITMAP_##name = BIT(bit_no),
^~~
Fixes: 40df8263a0 ("rdma: Add dev object")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When performing make install in iproute2 (current git master),
if $(HAVE_MNL) is not selected, some Makefiles try to call
install with an empty target, which causes a non-critical make error.
Signed-off-by: Emeric Dupont <emeric.dupont@zii.aero>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This reverts commit e99c4443ae.
Patch added to iproute2-master breaks builds of -next because of a
more recent patch in -next that relies on the exports. Revert the
offending patch. Unfortunately this leaves a window where builds
break.
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit 4060e4c0d2 ("rdma: Add PD resource tracking
information"), the resource information shows PDs and MRs,
but help pages didn't fully reflect it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enrich rdmatool with an option to rename IB devices,
the command interface follows Iproute2 convention:
"rdma dev set [OLD-DEVNAME] name NEW-DEVNAME"
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
In contradiction to various show commands, the set command explicitly
requires to use device name as an argument. Provide new command
execution helper which enforces it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Variables 'src_port' and 'dst_port' are initialized only if attributes
RDMA_NLDEV_ATTR_RES_SRC_ADDR or RDMA_NLDEV_ATTR_RES_DST_ADDR are
present. Make sure to pass them over to rd_check_is_filtered() only if
that is the case.
Fixes: 9a362cc71a ("rdma: Add CM_ID resource tracking information")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With 'name' field defined as array in struct filters, it will always
contain a value irrespective of whether a name was assigned or not.
Fix this by turning the field into a const char pointer.
Fixes: 1174be72d1 ("rdma: Add filtering infrastructure")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The port capability mask represents IBTA PortInfo specification,
but as it is written in description of kernel commit 2f944c0fbf58
("RDMA: Fix storage of PortInfo CapabilityMask in the kernel"),
the bit 26 was mistakenly overwritten.
The rdmatool followed it too and mislead users by presenting wrong
value. Since it never showed proper value, we update the whole
port_cap_mask to comply with IBTA and show real HW values.
Fixes: da990ab40a ("rdma: Add link object")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Merge in latest santized kernel header.
Put sanitized version of current ib_user_verbs.h.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In the commit 9a362cc71a, new userspace header:
(i.e rdma/rdma_user_cm.h -> linux/in6.h)
is included before the kernel space header:
(i.e utils.h -> resolv.h -> netinet/in.h).
This leads to unsynchronous some IP headers and compiler got failure
with error: redefinition of some structs IP.
In this commit, just reorder this including to make them in-sync.
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This enhancement allows printing rdma device-specific state, if provided
by the kernel. This is done in a generic manner, so rdma tool doesn't
need to know about the details of every type of rdma device.
Driver attributes for a rdma resource are in the form of <key,
[print_type], value> tuples, where the key is a string and the value can
be any supported driver attribute. The print_type attribute, if present,
provides a print format to use vs the standard print format for the type.
For example, the default print type for a PROVIDER_S32 value is "%d ",
but "0x%x " if the print_type of PRINT_TYPE_HEX is included inthe tuple.
Driver resources are only printed when the -dd flag is present.
If -p is present, then the output is formatted to not exceed 80 columns,
otherwise it is printed as a single row to be grep/awk friendly.
Example output:
# rdma resource show qp lqpn 1028 -dd -p
link cxgb4_0/- lqpn 1028 rqpn 0 type RC state RTS rq-psn 0 sq-psn 0 path-mig-state MIGRATED pid 0 comm [nvme_rdma]
sqid 1028 flushed 0 memsize 123968 cidx 85 pidx 85 wq_pidx 106 flush_cidx 85 in_use 0
size 386 flags 0x0 rqid 1029 memsize 16768 cidx 43 pidx 41 wq_pidx 171 msn 44 rqt_hwaddr 0x2a8a5d00
rqt_size 256 in_use 128 size 130
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The iproute2 header files must be complete to allow builds on
other places where some of the headers are not present.
For example, iproute2 is built on Windows Services for Linux
as a test tool. With the partial addition of rdma it was broken.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This makes rdma/include/uapi/rdma headers align with those produced
by doing make headers_install from upstream (Linus) tree.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The RDMA devices are operated in RoCE and iWARP modes have net device
underneath. Present their names in regular output and their net index
in detailed mode.
[root@nps ~]# rdma link show mlx5_3/1
4/1: mlx5_3/1: state ACTIVE physical_state LINK_UP netdev ens7
[root@nps ~]# rdma link show mlx5_3/1 -d
4/1: mlx5_3/1: state ACTIVE physical_state LINK_UP netdev ens7 netdev_index 7
caps: <CM, IP_BASED_GIDS>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
