Clean it up a bit, we can also get rid of some ugly ifdefs as in our case
TC_H_INGRESS is always defined.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
since all tc classifiers are required to specify ethertype as part of grammar
By not allowing eth_type to be specified we remove contradiction for
example when a user specifies:
tc filter add ... priority xxx protocol ip flower eth_type ipv6
This patch removes that contradiction
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
gcc < 4.6 does not handle C11 syntax for the static initialization of
anonymous struct/union, hence the following error:
tc_bpf.c:260: error: unknown field map_type specified in initializer
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
This patch replaces exits with returns in iplink
command. Helps to continue on errors when
invoked with ip -force -batch.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
"random" is a new IPv6 addrgenmode, enabling "stable_secret" type
addresses with an auto-generated secret.
$ ip link set eth0 addrgenmode random
$ ip -d link show dev eth0
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:21:86:a3:25:7d brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode random
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
It is possible to switch to another addrgenmode after setting a
valid secret. Allow switching back without reconfiguring the
secret for completeness.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
I repeatedly failed to get this right, so now I have to clean up my mess
afterwards.
Fixes: 7d6aadcd0a ("ip{,6}tunnel: have a shared stats parser/printer")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This has a slight side-effect of not aborting when /proc/net/dev is
malformed, but OTOH stats are not parsed for uninteresting interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Currently ip6 encap support for lwtunnel is missing.
This patch implement it, mostly duplicating the ipv4 parts.
Also be sure to insert a space after the encap type, when
showing lwtunnel, to avoid the tunnel type and the following
argument being merged into a single word.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add support for IFLA_VXLAN_COLLECT_METADATA via the
'external' keyword to the vxlan link.
Also enforce mutual exclusion between 'vni' and 'external'.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a whitespace in bpf_dump_error() usage, and also a missing closing
bracket in ntohl() macro for eBPF programs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently parse_encap_ip() does not update correctly argv/argc;
if multiple lwtunnel arguments are provided, the parsing fails after
the first one, i.e.
ip route add 172.16.101.0/24 dev vxlan1 encap ip id 42 dst 192.168.255.1
fails with:
Error: either "to" is duplicate, or "dst" is a garbage.
This commit addresses the issue, stepping to next argument at each iteration
of the parsing loop.
Fixes: 1e5293056a ("lwtunnel: Add encapsulation support to ip route")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 0f7543322c ("route: ignore RTAX_HOPLIMIT of value -1")
accidentally reordered fprintf statements. This patch restores the
original ordering.
Fixes: 0f7543322c ("route: ignore RTAX_HOPLIMIT of value -1")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch:
- Adds a utility function for parsing a 64 bit address
- Adds a utility function for converting a 64 bit address to ASCII
- Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>
Improve example files further and add a more generic set of possible
helpers for them that can be used.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Currently, the table id for VRF devices requires an integer. Convert
it to use rtnl_rttable_a2n which handles table names from the iproute2
directory.
This also fixes a bug in the original commit where table name are not
properly handled.
Fixes: 15faa0a30b ("add support for VRF device")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
There is two variables named 'len' in rtnl_talk. In fact, commit
c079e121a7 didn't work. For example, it was possible to trigger
a seg fault with this command:
$ ip link set gre2 type ip6gre hoplimit 32
Let's rename the argument len to maxlen.
Fixes: c079e121a7 ("libnetlink: add size argument to rtnl_talk")
Reported-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Older kernels use -1 internally as indicator to use the sysctl default,
but they still export the setting. Newer kernels use 0 to indicate that
(which is why the conversion from -1 to 0 was done here), but they also
stopped exporting the value. Since the meaning of -1 is clear, treat it
equally like default on newer kernels (which is to not print anything).
Signed-off-by: Phil Sutter <phil@nwl.cc>
On 24.11.2015 02:26, Stephen Hemminger wrote:
> On Thu, 12 Nov 2015 21:10:08 +0000
> Konstantin Shemyak <konstantin@shemyak.com> wrote:
>
>> When creating an IP tunnel over IPv6, the address family must be passed in
>> the option, e.g.
>>
>> ip -6 tunnel add mode ip6gre local 1::1 remote 2::2
>>
>> This makes it impossible to create both IPv4 and IPv6 tunnels in one batch.
>>
>> In fact the address family option is redundant here, as each tunnel mode is
>> relevant for only one address family.
>> The patch determines whether the applicable address family is AF_INET6
>> instead of the default AF_INET and makes the "-6" option unnecessary for
>> "ip tunnel add".
>>
>> Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
>> ---
>> ip/iptunnel.c | 26 ++++++++++++++++++++++++++
>> testsuite/tests/ip/tunnel/add_tunnel.t | 14 ++++++++++++++
>> 2 files changed, 40 insertions(+)
>> create mode 100755 testsuite/tests/ip/tunnel/add_tunnel.t
>>
>> diff --git a/ip/iptunnel.c b/ip/iptunnel.c
>> index 78fa988..7826a37 100644
>> --- a/ip/iptunnel.c
>> +++ b/ip/iptunnel.c
>> @@ -629,8 +629,34 @@ static int do_6rd(int argc, char **argv)
>> return tnl_6rd_ioctl(cmd, medium, &ip6rd);
>> }
>>
>> +static int tunnel_mode_is_ipv6(char *tunnel_mode) {
>> + char *ipv6_modes[] = {
>> + "ipv6/ipv6", "ip6ip6",
>> + "vti6",
>> + "ip/ipv6", "ipv4/ipv6", "ipip6", "ip4ip6",
>> + "ip6gre", "gre/ipv6",
>> + "any/ipv6", "any"
>> + };
>> + int i;
>> +
>> + for (i = 0; i < sizeof(ipv6_modes) / sizeof(char *); i++) {
>> + if (strcmp(ipv6_modes[i], tunnel_mode) == 0)
>> + return 1;
>> + }
>> + return 0;
>> +}
>> +
>
> The ipv6_modes table should be static const.
Thank you for the note! attached the corrected patch.
> Also is it possible to use strstr for ipv6 and ip6 or even strchr(tunnel_mode, '6')
> to simplify this?
There is IPv6 tunnel mode 'any', and IPv4 tunnel mode 'ipv6/ip' (aka
'sit'). It looks to me that attempts to find some substring match
would not make the code much shorter, but definitely less readable.
Konstantin Shemyak.
>From 42d27db0055c3a114fe6eb86d680bef9ec098ad4 Mon Sep 17 00:00:00 2001
From: Konstantin Shemyak <konstantin@shemyak.com>
Date: Thu, 12 Nov 2015 20:52:02 +0200
Subject: [PATCH] Tunnel address family is determined from the tunnel mode
When the tunnel mode already tells the IP address family, "ip tunnel"
command determines it and does not require option "-4"/"-6" to be passed.
This makes possible creating both IPv4 and IPv6 tunnels in one batch.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
I've added three examples to examples/bpf/ that demonstrate how one can
implement eBPF tail calls in tc with f.e. multiple levels of nesting.
That should act as a good starting point, but also as test cases for the
ELF loader and kernel. A real test suite for {f,m,e}_bpf is still to be
developed in future work.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
