This checking was performed only when adding interface but
it is needed also when deleting, otherwise the error will be:
ioctl(TUNSETIFF): Invalid argument
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Parenthesis are required else maxaddr value is a bool and thus output is always
1 when the option is set.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds the necessary changes to allow altering a slave device's
options via ip link set <device> type <master type>_slave specific-option.
It also adds support to set the bonding slaves' queue_id.
Example:
ip link set eth0 type bond_slave queue_id 10
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Starting from linux-3.15, kernel supports new tcp metric attributes :
TCP_METRIC_RTT_US & TCP_METRIC_RTTVAR_US
Update ip command to detect their use.
Signed-off-by: Eric Dumazet <edumazet@google.com>
This is ugly fix but solves the case when timestamp
or banner-label is printed before the cloned route will be skipped
by iproute filter which filters out all cached routes by default.
In such case timestamp will be printed twice:
Timestamp: Thu Sep 4 19:46:59 2014 457933 usec
Timestamp: Thu Sep 4 19:47:07 2014 977970 usec
10.3.5.1 dev wlp3s0 lladdr XX:XX:XX:XX:XX:XX STALE
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Update the rt_dsfield file to contain values defined in current RFC.
The days of TOS precedence are gone, even Cisco doesn't refer
to these in the documents.
The real checking is performed later in iplink_modify(..) func which
checks device existence if NLM_F_CREATE flag is set.
Also it fixes the case when impossible to add veth link which was
caused by 9a02651a87 (ip: check for missing dev arg when doing VF rate)
because these devices are not exist yet.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For hsr link there was no short description in ip-link man page.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently if mkdir failed with "Permission denied" error then "mount --make-shared ..."
error message will be showed because /var/run/netns does not exist.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
SNMP counters can be provided as 64bit numbers.
nstat needs to cope with this even if running in 32bit mode.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds ARPHRD_NETLINK to ll_types so that it can be properly
shown e.g. in `ip a`:
8: nlmon: <NOARP,UP,LOWER_UP> mtu 3776 qdisc noqueue state UNKNOWN group default
link/netlink
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
First, the default value for 1-k is documented as being 0, but is
currently being set to 1. (100%). This causes all packets to be dropped
in the good state if 1-k is not explicitly specified. Fix this by setting
the default to 0.
Second, the 1-h option is parsed correctly, however, the kernel is
expecting "h", not 1-h. Fix this by inverting the "1-h" percentage before
sending to and after receiving from the kernel. This does change the
behavior, but makes it consistent with the netem documentation and the
literature on the Gilbert-Elliot model, which refer to "1-h" and "1-k,"
not "h" or "k" directly.
Last, fix a minor formatting issue for the options reporting.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
root@moja-mojo:bridge# ./bridge fdb help
Usage: bridge fdb { add | append | del | replace } ADDR dev DEV {self|master} [ temp ]
[router] [ dst IPADDR] [ vlan VID ]
[ port PORT] [ vni VNI ] [via DEV]
bridge fdb {show} [ br BRDEV ] [ brport DEV ]
Lets start with two bridges each with a port...
root@moja-mojo:bridge# ./bridge link
10: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master sw1 state disabled priority 32 cost 100
11: eth1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100
show all...
root@moja-mojo:bridge# ./bridge fdb show
33:33:00:00:00:01 dev ifb0 self permanent
33:33:00:00:00:01 dev ifb1 self permanent
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:92:c0:60 dev eth0 self permanent
33:33:00:00:00:fb dev eth0 self permanent
01:00:5e:00:00:fb dev eth0 self permanent
01:00:5e:7f:ff:fd dev eth0 self permanent
01:00:5e:00:00:01 dev wlan0 self permanent
33:33:00:00:00:01 dev wlan0 self permanent
33:33:ff:c2:84:3b dev wlan0 self permanent
33:33:00:00:00:fb dev wlan0 self permanent
01:00:5e:00:00:01 dev virbr0 self permanent
01:00:5e:00:00:fb dev virbr0 self permanent
33:33:00:00:00:01 dev br0 self permanent
33:33:00:00:00:01 dev sw1 self permanent
33:33:00:00:00:01 dev dummy0 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master sw1 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
Lets see a netdev that is *not* attached to a bridge
root@moja-mojo:bridge# ./bridge fdb show brport eth0
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
33:33:ff:92:c0:60 self permanent
33:33:00:00:00:fb self permanent
01:00:5e:00:00:fb self permanent
01:00:5e:7f:ff:fd self permanent
Lets see a netdev that is bridge port
root@moja-mojo:bridge# ./bridge fdb show brport eth1
hadi@jhs-1:/media/MT1/other-gits/iproute-jul04/bridge$ ./bridge fdb show brport eth1
b6:5e:dd:ce:d7:5e vlan 0 master br0 permanent
33:33:00:00:00:01 self permanent
Specify the correct bridge and you get good stuff
root@moja-mojo:bridge# ./bridge fdb show brport eth1 br br0
6:5e:dd:ce:d7:5e vlan 0 master br0 permanent
33:33:00:00:00:01 self permanent
Specify the wrong bridge and you get good nada
root@moja-mojo:bridge# ./bridge fdb show brport eth1 br sw1
dump br0
root@moja-mojo:bridge# ./bridge fdb show br br0
33:33:00:00:00:01 dev br0 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
dump sw1
root@moja-mojo:bridge# ./bridge fdb show br sw1
33:33:00:00:00:01 dev sw1 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master sw1 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
Lets move a port from one bridge to another for shits-and-giggles
(as the New Brunswickians like to say)
root@moja-mojo:bridge# ip link set sw1-p1 master br0
Now dump again br0
root@moja-mojo:bridge# ./bridge fdb show br br0
33:33:00:00:00:01 dev br0 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This patch avoids a full link wildump request when the user has specified
a single link. Uses RTM_GETLINK without the NLM_F_DUMP flag.
This helps on a system with large number of interfaces.
This patch currently only uses the link ifindex in the filter.
Hoping to provide a subsequent kernel patch to do link dump filtering on
other attributes in the kernel.
In iplink_get, to be safe, this patch currently sets the answer buffer
size to the max size that libnetlink rtnl_talk can copy. The current api
does not seem to provide a way to indicate the answer buf size.
changelog from RFC to v1:
- incorporated comments from stephen (fixed comment and fixed if/else block)
changelog from v1 to v2:
- fix whitespaces error
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Consider the following command:
ip tunnel add mode vti remote 12.0.0.1 local 12.0.0.3 ikey 15
i_flags will be GRE_KEY|VTI_ISVTI. So, in order to distinguish between ipip and
vti we have to check just VTI_ISVTI bit, not the equality of i_flags and
VTI_ISVTI.
* Note, that there also was a bug in ip_tunnel/ip_vti, see
commit 7c8e6b9c281(ip_vti: Fix 'ip tunnel add' with 'key' parameters),
https://lkml.org/lkml/2014/6/7/125.
Even patched iproute could be unable to create vti tunnels with non-zero keys.
1) Unpatched iproute2:
[root@vm ~]# ip tunnel show
[root@vm ~]# lsmod | egrep '(ipip|vti)'
[root@vm ~]# ip tunnel add mode vti ikey 1
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ipip 4197 0
tunnel4 1659 1 ipip
ip_tunnel 9295 1 ipip
[root@vm ~]# ip tunnel show
tunl0: ip/ip remote any local any ttl inherit
[root@vm ~]# ip tunnel add mode vti remote 1.2.3.4 ikey 2
[root@vm ~]# ip tunnel show
ipip0: ip/ip remote 1.2.3.4 local any ttl inherit
tunl0: ip/ip remote any local any ttl inherit
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ipip 4197 0
tunnel4 1659 1 ipip
ip_tunnel 9295 1 ipip
# ipip tunnels are created instead of vti
2) Patched iproute2:
[root@vm ~]# ip tunnel show
[root@vm ~]# lsmod | egrep '(ipip|vti)'
[root@vm ~]# ip tunnel add mode vti ikey 1
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ip_vti 5258 0
ip_tunnel 9295 1 ip_vti
[root@vm ~]# ip tunnel show
vti0: ip/ip remote any local any ttl inherit ikey 1 okey 0
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
[root@vm ~]# ip tunnel add mode vti remote 1.2.3.4 ikey 2
[root@vm ~]# ip tunnel show
vti0: ip/ip remote any local any ttl inherit ikey 1 okey 0
vti1: ip/ip remote 1.2.3.4 local any ttl inherit ikey 2 okey 0
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
# Vti tunnels are created as expected
# * If you have unpatched kernel your vti tunnels will have ikey == okey == 0
Same story exists with ip tunnel show/del with non-zero [io]key: requests are
routed to tunl0 instead of ip_vti0.
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
Not sure how these typos slipped in back then, I suspect
too much coffee. ;) So lets fix them up properly.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Though nlmon device can be added, it was not listed
in the output of "ip link help".
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
This patch adds master dev name from NDA_MASTER netlink attribute
to bridge fdb show output
current iproute2 tries to print 'master' in the output if NTF_MASTER
is present. But, kernel today does not set NTF_MASTER during dump
requests. Which means I have not seen iproute2 bridge cmd print 'master' atall.
This patch overrides the NTF_MASTER flag if NDA_MASTER attribute is present.
Example output:
before this patch:
# bridge fdb show
44:38:39:00:27:ba dev bond2.2003 permanent
44:38:39:00:27:bb dev bond4.2003 permanent
44:38:39:00:27:bc dev bond2.2004 permanent
After this patch:
# bridge fdb show
44:38:39:00:27:ba dev bond2.2003 master br-2003 permanent
44:38:39:00:27:bb dev bond4.2003 master br-2003 permanent
44:38:39:00:27:bc dev bond2.2004 master br-2004 permanent
For comparision with the above, below is the output for NTF_SELF today,
# bridge fdb show
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:00:01:cc dev eth0 self permanent
If change in output is a concern, 'master' can be put at the end of the fdb
output line or made optional with -d[etails] option.
change from v1 to v2:
use 'bridge' instead of 'master' in fdb show output
change from v2 to v3:
use 'master' instead of 'bridge' in fdb show output
(master could also be a vxlan device)
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
o "min_tx_rate" option has been added for minimum Tx rate. Hence, for
consistent naming, "max_tx_rate" option has been introduced for maximum
Tx rate.
o Change in v2: "rate" can be used along with "max_tx_rate".
When both are specified, "max_tx_rate" should override.
o Change in v3:
* IFLA_VF_RATE: When IFLA_VF_RATE is used, and user has given only one of
min_tx_rate or max_tx_rate, reading of previous rate limits is done in
userspace instead of in kernel space before ndo_set_vf_rate.
* IFLA_VF_TX_RATE: When IFLA_VF_TX_RATE is used, min_tx_rate is always read
in kernel space. This takes care of below scenarios:
(1) when old tool sends "rate" but kernel is new (expects min and max)
(2) when new tool sends only "rate" but kernel is old (expects only "rate")
o Change in v4 as suggested by Stephen Hemminger:
* As per iproute policy, input and output formats should match. Changing display
of max_tx_rate and min_tx_rate options accordingly.
./ip/ip link show p3p1
8: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0e:1e:16:ce:40 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 2a:18:8f:4d:3d:d4, tx rate 700 (Mbps), max_tx_rate 700Mbps, min_tx_rate 200Mbps
vf 1 MAC 72:dc:ba:f9:df:fd
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Michael Tautschnig wrote:
During a rebuild [...]. Please note that we use our research
compiler tool-chain (using tools from the cbmc package), which permits extended
reporting on type inconsistencies at link time.
[...]
gcc bridge.o fdb.o monitor.o link.o mdb.o vlan.o ../lib/libnetlink.a ../lib/libutil.a ../lib/libnetlink.a ../lib/libutil.a -o bridge
file link.c line 18: error: conflicting types for variable "filter_index"
old definition in module fdb file fdb.c line 29
signed int
new definition in module link file link.c line 18
unsigned int
<builtin>: recipe for target 'bridge' failed
make[3]: *** [bridge] Error 64
make[3]: Leaving directory '/srv/jenkins-slave/workspace/sid-goto-cc-iproute2/iproute2-3.14.0/bridge'
Makefile:45: recipe for target 'all' failed
While practical constraints may limit the value of filter_index to remain within
the bounds of a positive signed int, there is certainly no such guarantee here.
Also, a plain majority vote suggests that this really just a wrong declaration
in link.c as several declarations of filter_index as signed int exist.
[...]
My followup on this was:
I think the majority is wrong.
filter_index is assigned exclusively from if_nametoindex or ll_name_to_index
which both return unsigned int.
Changing it to unsigned everywhere seems better.
This has been minimally tested by using the bridge tool
to add vids and showing available vids on different devices.
Reported-by: Michael Tautschnig <mt@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When we create a tunnel on top of a link and the link specified
in cmdline doesn't exist, an error message should be shown.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Since linux-3.15, kernel exports tcpi_pacing_rate and
tcpi_max_pacing_rate in tcp_info
Add TCP pacing_rate information on ss -i output :
lpaa23:~# ./ss -ti dst 10.246.7.151
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 0 325800 10.246.7.151:57614
10.246.7.152:46811
cubic wscale:7,7 rto:201 rtt:0.081/0.006 mss:1448 cwnd:90 ssthresh:63
send 12871.1Mbps pacing_rate 15397.8Mbps unacked:90 retrans:0/305
rcv_space:29200
If SO_MAX_PACING_RATE is set on the socket, we add /max_pacing_rate as
in :
... pacing_rate 1570.5Mbps/2.0Gbps ...
Signed-off-by: Eric Dumazet <edumazet@google.com>
When limit<burst latency becomes <0, for example:
# tc qdisc add dev eth0 root handle 1: tbf limit 100K burst 256K rate 256kbit
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb lat 4290.0s
If latency<0 there is no reason to show it. Limit will be printed instead of
latency when latency<0:
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb limit 100Kb
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
Controller Area Network (CAN) interfaces are physical network interfaces.
They can't be 'created' like software devices by 'ip link add type can'.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
This also fixes a long standing bug of not sanely reporting the
action chain ordering
Sample scenario test
on window 1(event window):
run "tc monitor" and observe events
on window 2:
sudo tc actions add action drop index 10
sudo tc actions add action ok index 12
sudo tc actions ls action gact
sudo tc actions flush action gact
See the event window reporting two entries
(doing another listing should show empty generic actions)
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
