The XFRMA_IF_ID attribute is set in policies for them to be
associated with an XFRM interface (4.19+).
Add support for getting/deleting policies with this attribute.
For supporting 'deleteall' the XFRMA_IF_ID attribute needs to be
explicitly copied.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In commit aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
I added the ability to set/print the xfrm interface ID without updating
the man page.
Fixes: aed63ae1ac ("ip xfrm: support setting/printing XFRMA_IF_ID attribute in states/policies")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When setting a policer to a trap group, a value of "0" will unbind the
currently bound policer from the group.
The behavior is intentional and tested in kernel selftests, so document
it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the new "mpls" keyword that can be used to match MPLS fields in
arbitrary Label Stack Entries.
LSEs are introduced by the "lse" keyword and followed by LSE options:
"depth", "label", "tc", "bos" and "ttl". The depth is manadtory, the
other options are optionals.
For example, the following filter drops MPLS packets having two labels,
where the first label is 21 and has TTL 64 and the second label is 22:
$ tc filter add dev ethX ingress proto mpls_uc flower mpls \
lse depth 1 label 21 ttl 64 \
lse depth 2 label 22 bos 1 \
action drop
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Bareudp devices provide a generic L3 encapsulation for tunnelling
different protocols like MPLS, IP, NSH, etc. inside a UDP tunnel.
This patch is based on original work from Martin Varghese:
https://lore.kernel.org/netdev/1570532361-15163-1-git-send-email-martinvarghesenokia@gmail.com/
Examples:
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with
ethertype 0x8847 (unicast MPLS traffic). The destination port of the
UDP header will be set to 6635. The device will listen on UDP port 6635
to receive traffic.
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
Same as the MPLS example, but for IPv4. The "multiproto" keyword allows
the device to also tunnel IPv6 traffic.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single font macro for a single argument.
Remove unnecessary quotes for a single-font macro.
Join two lines into one.
The output of "nroff" and "groff" is unchanged.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for one argument.
Remove unnecessary quotes for a single font macro.
Join some lines into one.
The output of "nroff" and "groff" is unchanged, except for a font
change in two lines.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add 'raw' argument to get the resource in raw format.
When RDMA_NLDEV_ATTR_RES_RAW is set in the netlink message,
then the resource fields are in raw format, print it as byte array.
Example:
$rdma res show qp link rocep0s12f0/1 lqpn 1137 -j -r
[{"ifindex":7,"ifname":"mlx5_1","port":1,
"data":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,...]}]
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The "early_drop" qevent matches packets that have been early-dropped. The
"mark" qevent matches packets that have been ECN-marked.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support to assign a nexthop group
id to an fdb entry.
$bridge fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to add and delete
ecmp nexthops of type fdb. Such nexthops can
be linked to vxlan fdb entries.
$ip nexthop add id 12 via 172.16.1.2 fdb
$ip nexthop add id 13 via 172.16.1.3 fdb
$ip nexthop add id 102 group 12/13 fdb
$bridge fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
optimistic DAD is controllable via sysctl for an interface
or all interfaces on the system. This would affect addresses
added by the kernel only.
Recent kernels, however, have enabled support for adding optimistic
address via userspace. This plumbs that support.
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch introduces two new features: obtaining cgroup information and
filtering sockets by cgroups. These features work based on cgroup v2 ID
field in the socket (kernel should be compiled with CONFIG_SOCK_CGROUP_DATA).
Cgroup information can be obtained by specifying --cgroup flag and now contains
only pathname. For faster pathname lookups cgroup cache is implemented. This
cache is filled on ss startup and missed entries are resolved and saved
on the fly.
Cgroup filter extends EXPRESSION and allows to specify cgroup pathname
(relative or absolute) to obtain sockets attached only to this cgroup.
Filter syntax: ss [ cgroup PATHNAME ]
Examples:
ss -a cgroup /sys/fs/cgroup/unified (or ss -a cgroup .)
ss -a cgroup /sys/fs/cgroup/unified/cgroup1 (or ss -a cgroup cgroup1)
v2:
- style fixes (David Ahern)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev erspan1 ingress
# tc filter add dev erspan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
erspan_opts 1:2:0:0/1:255:0:0 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev erspan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
erspan_opts 1:2:0:0/1:255:0:0
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 1 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev vxlan1 ingress
# tc filter add dev vxlan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
vxlan_opts 65793/4008635966 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev vxlan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
vxlan_opts 65793/4008635966
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 3 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- get_u32 with base = 0 for gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
erspan_opts 1:2:0:0 \
action mirred egress redirect dev erspan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49151 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
erspan_opts 1:2:0:0
csum pipe
index 2 ref 1 bind 1
...
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
vxlan_opts 65793 \
action mirred egress redirect dev vxlan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
vxlan_opts 65793
...
v1->v2:
- get_u32 with base = 0 for gbp.
- use to print_unint("0x%x") to print gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
$ ip link add dev erspan11 type erspan \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 0
CC: Dmitriy Andreyevskiy <dandreye@cisco.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While at it, additionally fix a mandoc warning in mptcp.8
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for configuring offload mode upon MACsec
device creation.
If offload mode is not specified, then netlink attribute is not
added. Default behavior on the kernel side in this case is
backward-compatible (offloading is disabled by default).
Example:
$ ip link add link eth0 macsec0 type macsec port 11 encrypt on offload mac
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch enables MAC HW offload usage in iproute, since MACSec
implementation supports it now.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Root_block is also called root port guard, document it.
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Document that guard disable the port and how to reenable it
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This option is useful for Wifi bridge but need some tweak.
Document it from kernel patches documentation
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These can be configured to different paths. Reflect that in the
generated documentation.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Prepare for adding new variable substitutions. Unify the sed rules while
we're at it, since there's no need to write this out 4 times.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for configuring auto_dump attribute per reporter.
With this attribute, one can indicate whether the devlink kernel core
should execute automatic dump on error.
The change will be reflected in show, set and man commands.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix description for htb class prio parameter to indicate it's not
mandatory.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb class parameter quantum.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb qdisc parameter r2q.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This sentence predates addition of extended pedit for IPv6 packets.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
