This patch was generated by the following semantic patch (a trimmed down
version of what is shipped with Linux sources):
@@
type T;
T[] E;
@@
(
- (sizeof(E)/sizeof(*E))
+ ARRAY_SIZE(E)
|
- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)
|
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
)
The only manual adjustment was to include utils.h in misc/nstat.c to make
the macro known there.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add support for device names in the filter. Example:
root@kenny:~# ss -t 'sport == :22 && dev == red'
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 0 0 10.100.1.2%red:ssh 10.100.1.254:47814
ESTAB 0 0 2100:1::2%red:ssh 2100:1::64:49406
Since kernel does not support iface in the filter specifying a
device name means all filtering is done in userspace.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Allow ssfilter_bytecompile to return 0 for filter ops the kernel
does not support. If such an op is in the filter string then all
filtering is done in userspace.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Extract parsing of sockstat and filter from inet_show_sock.
While moving run_ssfilter into callers of inet_show_sock enable
userspace filtering before the kill.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
On Tue, Jun 21, 2016 at 06:18 PM CEST, Phil Sutter <phil@nwl.cc> wrote:
> By combining the attribute extraction and check for existence, the
> additional indentation level in the 'else' clause can be avoided.
>
> In addition to that, common actions for 'daddr' are combined since the
> function returns if neither of the branches are taken.
>
> Signed-off-by: Phil Sutter <phil@nwl.cc>
> ---
> ip/tcp_metrics.c | 45 ++++++++++++++++++---------------------------
> 1 file changed, 18 insertions(+), 27 deletions(-)
>
> diff --git a/ip/tcp_metrics.c b/ip/tcp_metrics.c
> index f82604f458ada..899830c127bcb 100644
> --- a/ip/tcp_metrics.c
> +++ b/ip/tcp_metrics.c
> @@ -112,47 +112,38 @@ static int process_msg(const struct sockaddr_nl *who, struct nlmsghdr *n,
> parse_rtattr(attrs, TCP_METRICS_ATTR_MAX, (void *) ghdr + GENL_HDRLEN,
> len);
>
> - a = attrs[TCP_METRICS_ATTR_ADDR_IPV4];
> - if (a) {
> + if ((a = attrs[TCP_METRICS_ATTR_ADDR_IPV4])) {
Copy the pointer inside the branch?
Same gain on indentation while keeping checkpatch happy.
I only compile-tested the patch below.
Thanks,
Jakub
I forgot to change the variable in the conditional, too.
Fixes: 8fe58d5894 ("iplink: Check address length via netlink")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a feature which was lost during the conversion to netlink
interface: If the device exists and a user tries to change the link
layer address, query the kernel for the old address first and reject the
new one if sizes differ.
This patch adds the same check when setting VF address by assuming same
length as PF device.
Note that at least for VFs the check can't be done in kernel space since
struct ifla_vf_mac lacks a length field and due to netlink padding the
exact size can't be communicated to the kernel.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Instead of initializing fields after (or sometimes even before) zeroing
the whole struct via memset(), initialize the whole thing at declaration
time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Since commit 5cd1adb ("Update to current iptables headers") the build
with m_ipt.o and the following config will fail:
TC_CONFIG_XT:=n
TC_CONFIG_XT_OLD:=n
TC_CONFIG_XT_OLD_H:=n
This patch renames "iptables_target" to "xtables_target" and some other
things which gets renamed and I noticed while reading iptables git log.
Functions which are not used in m_ipt.c and not exported by the header
are removed, if they still used in m_ipt.c I added a static to the function.
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Kernel commit 96c63fa7393d ("net: Add l3mdev rule") added support for
the FRA_L3MDEV attribute. The attribute enables use of l3mdev rules
which mean 'get table id from l3 master device'. This patch adds
support to iproute2 to show, add and delete rules with this attribute.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This pulls common code from parse_ipt() and print_ipt() functions
together.
While here, also fix for incorrect use of the global 'optarg' variable
in print_ipt().
Signed-off-by: Phil Sutter <phil@nwl.cc>
After dropping the unused decrement of argc in the function's tail, it
can fully take over what iargc has been used for.
Signed-off-by: Phil Sutter <phil@nwl.cc>
By exiting early if xtables_find_target() fails, one indenting level can
be dropped. Some of the wrongly indented code then happens to sit at the
right spot by accident which is why this patch is smaller than expected.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Without this, the following call to tc would segfault:
| tc filter add dev d0 parent ffff: u32 match u32 0 0 \
| action xt -j MARK --set-mark 0x1 \
| action xt -j MARK --set-mark 0x1
The reason is basically the same as for 6e2e5ec28b ("fix print_ipt:
segfault if more then one filter with action -j MARK.") but in
parse_ipt() instead of print_ipt().
Signed-off-by: Phil Sutter <phil@nwl.cc>
Iptables standard targets like DROP or REJECT don't implement the print
callback in libxtables. Hence the following command would segfault:
| tc filter add dev d0 parent ffff: u32 match u32 0 0 action xt -j DROP
With this patch standard targets still can't be used (and are not really
useful anyway), but at least it doesn't crash anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Doc text shamelessly stolen from the introducing commit's message
(6c55c8c461 ['ip link set vf: Added "query_rss" command']).
Signed-off-by: Phil Sutter <phil@nwl.cc>
strtoul() only modifies errno on overflow, so if errno is not zero
before calling the function its value is preserved and makes the
function fail for valid inputs; initialize it.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Not sure why this was limited to ip-link before. It is semantically
equal to the 'master' keyword, which is not restricted at all.
The man page and help text adjustments include the 'master' keyword as
well since that is also supported but wasn't documented before.
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
On devices that support TC U32 offloads, these flags enable a filter to be
added only to HW or only to SW. skip_sw and skip_hw are mutually exclusive
flags. By default without any flags, the filter is added to both HW and SW,
but no error checks are done in case of failure to add to HW.
With skip-sw, failure to add to HW is treated as an error.
Here is a sample script that adds 2 filters, one with skip_sw and the other
with skip_hw flag.
# add ingress qdisc
tc qdisc add dev p4p1 ingress
# enable hw tc offload.
ethtool -K p4p1 hw-tc-offload on
# add u32 filter with skip-sw flag.
tc filter add dev p4p1 parent ffff: protocol ip prio 99 \
handle 800:0:1 u32 ht 800: flowid 800:1 \
skip-sw \
match ip src 192.168.1.0/24 \
action drop
# add u32 filter with skip-hw flag.
tc filter add dev p4p1 parent ffff: protocol ip prio 99 \
handle 800:0:2 u32 ht 800: flowid 800:2 \
skip-hw \
match ip src 192.168.2.0/24 \
action drop
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
This resolves what appears to be a typo.
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Extend ip-link to create MACsec devices
ip link add link <master> <macsec> type macsec [options]
Add `ip macsec` command to configure receive-side secure channels and
secure associations within a macsec netdevice.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Phil Sutter <phil@nwl.cc>
