Entries with long vhost names in /proc/net/igmp have no whitespace
between name and colon, so sscanf() adds it to vhost and
'ip maddr show iface' doesn't include inet result.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
In order to ensure no backward/forward compatiablity problems,
make sure that all kernel headers used come from the local copy.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Correct typo in example in ife man page.
Fixes: 06f9a59170 ("man: tc-ife.8: man page for ife action")
Cc: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This patch adds a new argument to the bridge fdb show command that allows
to filter by entry state.
Also update the man page to include all available show arguments.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Frank reported that table ids for very large numbers are not properly
detected:
$ ip li add foobar type vrf table 98765432100123456789
command succeeds and resulting table id is actually:
21: foobar: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether da:ea:d4:77:38:2a brd ff:ff:ff:ff:ff:ff promiscuity 0
vrf table 4294967295 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Make the temp variable 'i' unsigned long and let the typecast to u32
happen on assignment to id.
Reported-by: Frank Kellermann <frank.kellermann@atos.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Show ipv6 tunnel keys on presence of GRE_KEY flag for tunnel types
other than GRE. Aligns ipv6 behaviour with ipv4.
Signed-off-by: dforster@brocade.com
Said iptables version introduced struct xtables_globals field
'compat_rev', a function pointer. Initializing it is mandatory as
libxtables calls it without existence check.
Without this, tc segfaults when using the xt action like so:
| tc filter add dev d0 parent ffff: u32 match u32 0 0 \
| action xt -j MARK --set-mark 20
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add support for reading proto id/name mappings from rt_protos.d
directory. Allows users to have custom protocol values converted
to human friendly names.
Each file under rt_protos.d has the 'id name' format used by
rt_protos. Only .conf files are read and parsed.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Next up a non-root user gets various bpf related error messages:
$ ip vrf exec mgmt bash
Failed to load BPF prog: 'Operation not permitted'
Kernel compiled with CGROUP_BPF enabled?
Catch the EPERM error and do not show the kernel config option.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently, if a non-root user attempts to run ip vrf exec a non-helpful
error is returned:
$ ip vrf exec mgmt bash
Failed to mount cgroup2. Are CGROUPS enabled in your kernel?
Only show the CGROUPS kernel hint for the ENODEV error and for the
rest show the strerror for the errno. So now:
$ ip/ip vrf exec mgmt bash
Failed to mount cgroup2: Operation not permitted
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Andy reported a missing newline if a non-root user attempts to run
'ip vrf exec':
$ ./ip/ip vrf exec default /bin/echo asdf
mkdir failed for /var/run/cgroup2: Permission deniedFailed to setup vrf cgroup2 directory
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Since 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
tc flower supports setting the dest UDP port.
* Use "port_number" to be consistent with other man-page text
* Re-add "enc_dst_port" documentation to manpage which was
accidently removed by b2a1f740aa ("tc: flower: document that *_ip
parameters take a PREFIX as an argument.")
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Enhance flower to support matching on flags.
The 1st flag allows to match on whether the packet is
an IP fragment.
Example:
# add a flower filter that will drop fragmented packets
# (bit 0 of control flags)
tc filter add dev ens4f0 protocol ip parent ffff: \
flower \
src_mac e4:1d:2d:fd:8b:01 \
dst_mac e4:1d:2d:fd:8b:02 \
indev ens4f0 \
matching_flags 0x1/0x1 \
action drop
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
This fixes under musl build issues like:
f_matchall.c: In function ‘matchall_parse_opt’:
f_matchall.c:48:12: error: ‘LONG_MIN’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
f_matchall.c:48:12: note: each undeclared identifier is reported only once for each function it appears in
f_matchall.c:48:29: error: ‘LONG_MAX’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
tunnel key set parameters includes also dest UDP port, add it to the
usage.
Fixes: 449c709c38 ("tc/m_tunnel_key: Add dest UDP port to tunnel key action")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
Encapsulation dest UDP port is part of the classifier matching
parameters, add it to the usage.
Fixes: 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
A vrf is local to a namespace. Drop any VRF association before trying
to exec a command in the new namespace.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Path in vrf_switch for "default" VRF is supposed to be MNT/vrf not
MNT/default. Also, default_vrf flag is redundant with ifindex. Remove
the flag in favor of ifindex != 0.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Split ipvrf_identify into arg processing and a function that does the
actual cgroup file parsing. The latter function is used in a follow
on patch.
In the process, convert the reading of the cgroups file to use fopen
and fgets just in case the file ever grows beyond 4k. Move printing
of any error message and the vrf name to the caller of the new
vrf_identify.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Move the hint about CGROUP_BPF enabled to prog_load failure since
it fails before the attach. Update the existing error message to
print to stderr.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
A recent cleanup causes a compile warning on Debian jessie:
CC utils.o
utils.c: In function ‘get_addr_1’:
utils.c:486:21: warning: passing argument 1 of ‘ll_addr_a2n’ from incompatible pointer type
len = ll_addr_a2n(&addr->data, sizeof(addr->data), name);
^
In file included from utils.c:34:0:
../include/rt_names.h:27:5: note: expected ‘char *’ but argument is of type ‘__u32 (*)[8]’
int ll_addr_a2n(char *lladdr, int len, const char *arg);
^
Revert the removal of the typecast
Fixes: e1933b9281 ("utils: cleanup style")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
'ip vrf' follows the user semnatics established by 'ip netns'.
The 'ip vrf' subcommand supports 3 usages:
1. Run a command against a given vrf:
ip vrf exec NAME CMD
Uses the recently committed cgroup/sock BPF option. vrf directory
is added to cgroup2 mount. Individual vrfs are created under it. BPF
filter attached to vrf/NAME cgroup2 to set sk_bound_dev_if to the VRF
device index. From there the current process (ip's pid) is addded to
the cgroups.proc file and the given command is exected. In doing so
all AF_INET/AF_INET6 (ipv4/ipv6) sockets are automatically bound to
the VRF domain.
The association is inherited parent to child allowing the command to
be a shell from which other commands are run relative to the VRF.
2. Show the VRF a process is bound to:
ip vrf id
This command essentially looks at /proc/pid/cgroup for a "::/vrf/"
entry with the VRF name following.
3. Show process ids bound to a VRF
ip vrf pids NAME
This command dumps the file MNT/vrf/NAME/cgroup.procs since that file
shows the process ids in the particular vrf cgroup.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
iplink_vrf has 2 functions used to validate a user given device name is
a VRF device and to return the table id. If the user string is not a
device name ip commands with a vrf keyword show a confusing error
message: "RTNETLINK answers: No such device".
Add a variant of rtnl_talk that does not display the "RTNETLINK answers"
message and update iplink_vrf to use it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
