Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure. The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.
This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.
Here is the relevant valgrind output:
==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251== at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251== by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251== by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251== by 0x8058E79: do_netns (ipnetns.c:776)
==1251== by 0x804D9FF: do_cmd (ip.c:110)
==1251== by 0x804D814: main (ip.c:300)
Support for the new rx_nohandler statistic.
This code is designed to handle the case where the kernel reported statistic
structure is smaller than the larger structure in later releases (and vice versa).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to add mpls multipath
routes.
example:
ip -f mpls route add 100 \
nexthop as 200 via inet 10.1.1.2 dev swp1 \
nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
It seems that I've made a mistake when I exported these, instead of a
space in the end I've put a newline character which is wrong and breaks
the single line output.
Fixes: 7d6bc3b87a ("bonding: export 3ad actor and partner port state")
Reported-by: Sam Tannous <stannous@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_NF_CALL_(IP|IP6|ARP)TABLES
attributes in iproute2 so it can change their values.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_INTVL
attribute in iproute2 so it can change the startup query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
attribute in iproute2 so it can change the query response interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_INTVL attribute
in iproute2 so it can change the query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER_INTVL
attribute in iproute2 so it can change the querier interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_MEMBERSHIP_INTVL
attribute in iproute2 so it can change the membership interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_INTVL
attribute in iproute2 so it can change the last member interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_CNT
attribute in iproute2 so it can change the startup query count.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_CNT
attribute in iproute2 so it can change the last member count value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_MAX attribute
in iproute2 so it can change the maximum hashed entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_ELASTICTITY
attribute in iproute2 so it can change the hash elasticity value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER attribute
in iproute2 so it can toggle the mcast querier value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_USE_IFADDR
attribute in iproute2 so it can toggle the multicast_query_use_ifaddr val.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
in iproute2 so it can change the multicast snooping value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_ROUTER attribute
in iproute2 so it can change the multicast router value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_VLAN_DEFAULT_PVID
attribute in iproute2 so it can change the default pvid.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_ADDR attribute
in iproute2 so it can change the group address.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_FWD_MASK attribute
in iproute2 so it can change the group forwarding mask.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Netlink already provides hello_timer, tcn_timer, topology_change_timer
and gc_timer, so let's make them visible.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
There is no intuitive option to add static fdb entries today.
'temp' seems to have a side effect of adding
'static' fdb entries. But the name and intent
of 'temp' does not say anything about it being static.
example:
bridge fdb add operates as follows:
$bridge fdb add 00:01:02:03:04:05 dev eth0 master
$bridge fdb add 00:01:02:03:04:06 dev eth0 master temp
$bridge fdb add 00:01:02:03:04:07 dev eth0 master local
$bridge fdb show
00:01:02:03:04:05 dev eth0 permanent
00:01:02:03:04:06 dev eth0 static
00:01:02:03:04:07 dev eth0 permanent
00:01:02:03:04:08 dev eth0 <<== dynamic, ageable learned mac
This patch adds a new bridge fdb type 'static' which
makes sure NUD_NOARP and NUD_REACHABLE is set for static
entries. This effectively is nothing but what 'temp'
does today. But the name 'temp' is misleading.
After the patch:
$bridge fdb add 00:01:02:03:04:06 dev eth0 master static
$bridge fdb show
00:01:02:03:04:06 dev eth0 static
'temp' could ideally be a dynamic mac that can age (ie just
NUD_REACHABLE). But, 'temp' sets 'NUD_NOARP' and 'NUD_REACHABLE'.
Too late to change 'temp' now. But, we are thinking of introduing a
'dynamic' keyword after this patch that only sets NUD_REACHABLE.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Don't reimplement them and rather use the macros from the gelf header,
that is, GELF_ST_BIND()/GELF_ST_TYPE().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Provide some more hints to the user/developer when relos have been found
that don't point to ld64 imm instruction. Ran couple of times into relos
generated by clang [1], where the compiler tried to uninline inlined
functions with eBPF and emitted BPF_JMP | BPF_CALL opcodes. If this seems
the case, give a hint that the user should do a work-around to use
always_inline annotation.
[1] https://llvm.org/bugs/show_bug.cgi?id=26243#c3
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With a bit larger, branchy eBPF programs f.e. already ~BPF_MAXINSNS/7 in
size, it happens rather quickly that bpf(2) rejects also valid programs
when only the verifier log buffer size we have in tc is too small.
Change that, so by default we don't do any logging, and only in error
case we retry with logging enabled. If we should fail providing a
reasonable dump of the verifier analysis, retry few times with a larger
log buffer so that we can at least give the user a chance to debug the
program.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
This change add the ability to create lwt/flow based/externally
controlled geneve device and to select the udp destination port used
by a full geneve tunnel.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 8f80d450c3 ("tc: fix compilation with old gcc (< 4.6)") was reverted
to ease the merge of the net-next branch.
Here is the new version.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
'ip monitor all' is broken on older kernels.
This patch fixes 'ip monitor all' to match
'all' and not 'all-nsid'.
It moves parsing arg 'all-nsid' to after parsing
'all'.
Before:
$ip monitor all
NETLINK_LISTEN_ALL_NSID: Protocol not available
After:
$ip monitor all
[NEIGH]Deleted 10.0.0.1 dev eth1 lladdr c4:54:44:4f:b2:dd STALE
Fixes: 449b824ad1 ("ipmonitor: allows to monitor in several netns")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Add a test that symbol from relocation entry is actually related
to map section and bail out with an error message if it's not the
case; in relation to [1].
[1] https://llvm.org/bugs/show_bug.cgi?id=26243
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
We need limits.h for PATH_MAX, fixes:
rt_names.c:364:13: error: ‘PATH_MAX’ undeclared (first use in this
function)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
the warning was:
iproute.c:301:12: warning: 'val' may be used uninitialized in this
function [-Wmaybe-uninitialized]
features &= ~RTAX_FEATURE_ECN;
^
iproute.c:575:10: note: 'val' was declared here
__u32 val;
^
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
This patch adds a -K / --kill option to ss that attempts to
forcibly close matching sockets using SOCK_DESTROY.
Because ss typically prints sockets instead of acting on them,
and because the kernel only supports forcibly closing some types
of sockets, the output of -K is as follows:
- If closing the socket succeeds, the socket is printed.
- If the kernel does not support forcibly closing this type of
socket (e.g., if it's a UDP socket, or a TIME_WAIT socket),
the socket is silently skipped.
- If an error occurs (e.g., permission denied), the error is
reported and ss exits.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
This change is a no-op, as currently no code uses rtnl_talk on
NETLINK_SOCK_DIAG_BY_FAMILY sockets. It is needed to suppress
spurious errors when using SOCK_DESTROY via rtnl_talk.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
grff wrapper returns warnings when parsing the ip-link.8.in file.
How to reproduce:
$ man --warnings ip-link > /dev/null
`R' is a string (producing the registered sign), not a macro.
[...]
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Options 'group' and 'remote' cannot take 'any' as value but 'local' can.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
eBPF llvm backend can support different BPF formats, make sure the object
we're trying to load matches with regards to endiannes and while at it, also
check for other attributes related to BPF ELFs.
# llc --version
LLVM (http://llvm.org/):
LLVM version 3.8.0svn
Optimized build.
Built Jan 9 2016 (02:08:10).
Default target: x86_64-unknown-linux-gnu
Host CPU: ivybridge
Registered Targets:
bpf - BPF (host endian)
bpfeb - BPF (big endian)
bpfel - BPF (little endian)
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
