Hello!
I'm attaching a patch [1] "Feed GCC 4.8.0 against new warning that is
shipped with -Wall: -Wsizeof-pointer-memaccess.".
More details: http://gcc.gnu.org/gcc-4.8/porting_to.html
Regards,
[1] 0001-Feed-GCC-4.8.0-against-new-warning-that-is-shipped-w.patch
>From 1f3ea01fe2ff61cbbca6474f7d9903a0756a4f44 Mon Sep 17 00:00:00 2001
From: Kamil Rytarowski <n54@gmx.com>
Date: Fri, 3 May 2013 18:43:38 +0200
Subject: [PATCH] Feed GCC 4.8.0 against new warning that is shipped with
-Wall: -Wsizeof-pointer-memaccess.
In trying to build on a RHEL6.3 I ran into several build issues that are
addressed in this patch.
The first is that xtables_merge_options only has 3 parameters. It appears
this is how this code was originally. As such for the case where the version
is less than 6 I am assuming it would be correct to maintain the original
setup that only had 3 parameters being passed instead of 4.
I also ran into an issue with the define for __ALIGN_KERNEL not being present.
I believe this may be due to the fact that __ALIGN_KERNEL was moved into a
separate header from ALIGN after the UAPI changes. In order to just cover all
of the bases I have moved the main definition for the macros into
__ALIGN_KERNEL_MASK and __ALIGN_KERNEL and if ALIGN is also needed then it is
just a direct redefine to __ALIGN_KERNEL.
Cc: Hasan Chowdhury <shemonc@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This change corrects a kernel incompatibility that was resulting in the
ext_filter_mask not being correctly discovered by the kernel as it is buried
somewhere in the ifinfomsg.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Be more careful about overflow in strtoXX routines.
Checks are based on documented interface on man pages.
Based on suggestion from "Mr Dash Four".
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tc command is missing documentation of -batch and -force switches
that are returned by "tc -help".
Add short description on their syntax and usage.
Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
In older versions of traffic shaping the Alpha kernel was special
and had higher HZ. This no longer matters, TC is based on high
resoulution timers in kernel.
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Bridge tool now supports setting and retrieving bridge port specific
link attributes. Document what attributes are supported and what
they mean.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Add netlink support bridge port attributes such as cost, priority, state
and flags. This also adds support for HW mode such as VEPA or VEB.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.
To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.
# bridge vlan add dev eth0 vid 10 pvid untagged brdev
# bridge vlan add
# bridge vlan delete dev eth0 vid 10
# bridge vlan show
This command supports the following flags:
master - peform the operation on the software bridge device. This is
the default behavior.
self - perform the operation on the hardware associated with the port.
This flag is required when the device is the bridge device and
the configuration is desired on the bridge device itself (not
one of the ports).
pvid - Set the PVID (port vlan id) for a given port. Any untagged
frames arriving on the port will be assigned to this vlan.
untagged - Sets the egress policy of for a given vlan. Default port
egress policy is tagged. Set this flag if you wish traffic
associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
This is the iproute2 support allowing an administrator to specify alternate
ports, vnis and outgoing interfaces for VXLAN device forwarding tables.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).
