netem support 64bit rates start from linux-3.13.
Add 64bit rates support in tc tools.
tc qdisc show dev eth0
qdisc netem 1: dev eth4 root refcnt 2 limit 1000 rate 35Gbit
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
To avoid loss when transforming burst to buffer in userspace, send
burst/mtu to kernel directly.
Kernel commit 2e04ad424b("sch_tbf: add TBF_BURST/TBF_PBURST attribute")
make it can handle burst/mtu.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Add support for bonding attributes just added to net-next.
On set, allow string or number value for enumerated attributes.
On show, use always use string value for attribute.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
This patch enables -A unix_stream, -A unix_dgram and
-A unix_seqpacket option even if ss gets socket information
via netlink.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.
We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software. "
For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.
Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00
All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.
For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)
Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
The vti interface will use GRE_KEY to match the right policy in kernel. So we
can not return fail when the tunnel is vti.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
The RTM_NEWLINK message accepts ifi_index non-zero value and lets
creation of links with given index (if it's free, or course). This
functionality is available since linux-v3.5.
This patch makes this API available via ip tool.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
attached.
cheers,
jamal
commit 58d78f9f6447df324cdeb99262442c5e3f1f924b
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sun Dec 22 10:34:18 2013 -0500
dont skip displaying of action chains or lists by TCA_ACT_MAX_PRIO
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
attached.
cheers,
jamal
commit d7869e6167c3553e93e254940b0647032b40fed8
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sun Dec 22 07:46:28 2013 -0500
print new line at the end for aesthetics
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
attached.
cheers,
jamal
commit b82057d9ec851a8aba8a295b959190ef5098f330
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sat Dec 21 17:00:11 2013 -0500
After a decade of trying to deprecate the old policer syntax,
I believe it is time to kill it. The kernel build option for old
policer is gone for at least 5 years now (although backward
compatibility is still there). Being backward compatible meant
hijacking the keyword "action" and was obstructing policies like:
tc filter add dev eth0 parent ffff: protocol ip pref 10 \
u32 match ip protocol 1 0xff flowid 1:10 \
action skbedit mark 1 \
action police rate 10kbit burst 10k pipe \
action skbedit mark 2 \
action police rate 20kbit burst 20k pipe \
action action mirred egress mirror dev dummy0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Currently ip-link(8) parses, but ignores "group" argument to
peer interface on veth creation.
Insert IFLA_GROUP attribute for peer interface when present.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Based on patch by Sergey Popovich <popovich_sergei@mail.ru>
This fixes crash when ip-link(8) invoced with command:
ip link add dev veth1a type veth peer
Use warn_unused_result to enforce checking return value of rtnl_send,
and fix where the errors are.
Suggested by initial patch from Petr Písař <ppisar@redhat.com>
Display more user friendly rates.
10Mbit is more readable than 10000Kbit
Before :
class htb 1:2 root prio 0 rate 10000Kbit ceil 10000Kbit ...
After:
class htb 1:2 root prio 0 rate 10Mbit ceil 10Mbit ...
Signed-off-by: Eric Dumazet <edumazet@google.com>
tbf support 64bit rates start from linux-3.13.
Add 64bit rates support in tc tools.
tc qdisc show dev eth0
qdisc tbf 1: root refcnt 2 rate 40000Mbit burst 230000b peakrate 50000Mbit minburst 87500b lat 50.0ms
This is a followup to ("htb: support 64bit rates").
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
As a system admin I occasionally want to be able to check that all
interfaces has a name in DNS or /etc/hosts file.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Example:
$ ss state established \( sport = :4060 or sport = :4061 or sport = :4062 or sport = :4063 or sport = :4064 or sport = :4065 or sport = :4066 or sport = :4067 \) > /dev/null
Aborted
In the example above ssfilter_bytecompile(...) will return (int)136.
char l1 = 136; means -120 which will result in a negative number
being passed to malloc at misc/ss.c:913.
Simply declare l1 and l2 as integers to avoid the char overflow.
This is one of the issues originally reported in http://bugs.debian.org/511720
Fix the same problem in other code paths as well (thanks to Eric Dumazet).
Reported-by: Andreas Schuldei <andreas@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Reviewed-by: Eric Dumazet <edumazet@google.com>
As both linux kernel and function ipaddrlabel_modify use unsigned int for
label. We should also use unsigned int value when print addrlabel in case of
misunderstanding.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
As a system admin I occasionally want to be able to check that all
interfaces has a name in DNS or /etc/hosts file.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Example:
$ ss state established \( sport = :4060 or sport = :4061 or sport = :4062 or sport = :4063 or sport = :4064 or sport = :4065 or sport = :4066 or sport = :4067 \) > /dev/null
Aborted
In the example above ssfilter_bytecompile(...) will return (int)136.
char l1 = 136; means -120 which will result in a negative number
being passed to malloc at misc/ss.c:913.
Simply declare l1 and l2 as integers to avoid the char overflow.
This is one of the issues originally reported in http://bugs.debian.org/511720
Fix the same problem in other code paths as well (thanks to Eric Dumazet).
Reported-by: Andreas Schuldei <andreas@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Reviewed-by: Eric Dumazet <edumazet@google.com>
As both linux kernel and function ipaddrlabel_modify use unsigned int for
label. We should also use unsigned int value when print addrlabel in case of
misunderstanding.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
This is the iproute2 part of the kernel patch "net: sched:
add BPF-based traffic classifier".
[Will re-submit later again for iproute2 when window for
-next submissions opens.]
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
