Since there aren't any targets that currently use this pattern rule, this
is more of a proactive fix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This adds support for setting the skb mark.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Add a new cleaned up m_xt.c based on m_xt_old.c
The new m_xt.c has been updated to use the new names and new api
that xtables exposes in iptables 1.4.5.
All the old internal api cruft has also been dropped.
Additionally, a configure script test is added to check for
the new xtables api and set the TC_CONFIG_XT flag in Config.
(tc/Makefile already handles this flag in previous commit.)
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Move the file and rename the configure flags.
The file is being kept around for iptables < 1.4.5 compatibility.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
The kernel takes a lack of options as indication that the fw classifier
should operate in compatibility mode, where marks are mapped directly to
classids.
Commit e22b42a (tc mask patch) broke this by adding an empty TCA_OPTIONS
attribute even if no handle is specified. Restore the old behaviour.
Signed-off-by: Patrick McHardy <kaber@trash.net>
A bunch of source files look like they're copy & pasted from other files,
and some include header files that they don't actually need. Since dlfcn
has very specific usage (and is a pain on a static-only system), drop it
where it isn't really needed.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The iptables code supports a "no shared libs" mode where it can be used
without requiring dlfcn related functionality. This adds similar support
to iproute2 so that it can easily be used on systems like nommu Linux (but
obviously with a few limitations -- no dynamic plugins).
Rather than modify every location that uses dlfcn.h, I hooked the dlfcn.h
header with stub functions when shared library support is disabled. Then
symbol lookup is done via a local static lookup table (which is generated
automatically at build time) so that internal symbols can be found.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sometimes while dividing bandwidth by classes it is useful to see how some
specific class doing things live.
Which my simple patch it is possible to do
watch -n1 "tc -s -d class show dev eth0.2022 classid 1:1520"
and to get live statistics, how packets queued or dropped, and how much
bandwidth used (if estimator defined) for specific class.
Signed-off-by: Denys Fedoryshchenko <denys@visp.net.lb>
This change was forgotten by Stephen in the last release
Signed-off-by: Denys Fedoryschenko <denys@visp.net.lb>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Many thanks to Yevgeny Kosarzhevsky <yevg@pisem.net> for reporting
and a lot of testing
Thanks to Jan Engelhardt <jengelh@medozas.de> for a lot of advice
Thanks to Denys Fedoryschenko <denys@visp.net.lb> for some sample
code that he tried and thanks to Andreas Henriksson <andreas@fatal.se>
(who maintains iproute2 on debian) for the persistent followup.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Original from: Alexander Duyck <alexander.h.duyck@intel.com>
A bug was found in which the memory for the tc_skbedit struct was being
used uninitialized to 0. Alternative version of original fix
using initializer rather than memset.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
1)optind according iptables sources have to be set to 0. If it is set to 1, in
batch it will mess up things. Also in iptables sources i notice that ->tflags
and ->used need to be reset.
2)Since target->t = fw_calloc(1, size); allocated memory in function build_st,
it have to be freed at the end, or in batch we will have memory leak. TODO:
Probably it must be freed in all "return -1" cases in parse_ipt after
build_st. About this i am not sure, up to Stephen.
3)new_name was malloc'ed, but not freed
Add support for multiq qdisc
This patch adds the ability to configure the multiq qdisc. Since the qdisc does not require any input it will pull the number of bands directly from the device that it is added to the root of.
usage: tc qdisc add dev <DEV> root handle <HANDLE> multiq
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Provides ability to edit queue_mapping field
Provides ability to edit priority field
usage: action skbedit [queue_mapping QUEUE_MAPPING] [priority PRIORITY]
at least one option must be select, or both at the same time
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Hello Rafael Almeida.
I noticed your patch adding DESTDIR support in the latest iproute2 release.
Much appreciated! Soon the debian packages might be able to move to actually
using "make install" rather then it's own installation procedure when
building packages. I've noticed something that will break though....
Debian packages usually sets DESTDIR=debian/tmp/ and packages the contents
of that directory as if it where the root file system. This will break
the /usr/lib/{tc,ip}/ module loading, because they DESTDIR (/usr) will be
/whatever-the-build-path-was/debian/tmp/lib/{tc,ip}/.
I beleive others usually call this the LIBDIR to make the separation between
DISTDIR being the (possibly temporary) place things are put when build is
done, and LIBDIR (and others) are used for actual runtime paths.
I'm attaching a patch that I think fixes this, but would be really happy if
you could have a look at to verify I'm not screwing something up.
--
Regards,
Andreas Henriksson
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Patch adds generic size table that is similiar to rate table, with
difference that size table stores link layer packet size.
Based on patch by Patrick McHardy
http://marc.info/?l=linux-netdev&m=115201979221729&w=2
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
After changing the DESTDIR the installated binaries have some issues
due to hard coded paths. For example, using distributions on NetEm
would segfault.
I've changed iplink.c and tc_util.c so they are now aware of DESTDIR.
Along with that change I needed to change the main Makefile so it
defines the DESTDIR macro when calling gcc.
I also changed the paths so that during the installation sbin, etc,
share and lib directories are created directly inside of the DESTDIR,
instead of creating a usr directory inside that. That's the behaviour
of most packages out there, so I think most users will be expecting
that to happen.
> # tc filter show dev eth1 | grep 4:29:d1
> filter parent 1: protocol ip pref 5 u32 fh 4:29:d1 order 209 key ht 4
> bkt 29 flowid 1:b7aa
>
> # tc filter del dev eth1 parent 1: pref 5 handle 4:29:d1 u32
> RTNETLINK answers: Invalid argument
> We have an error talking to the kernel
>
> after rollback to package"sys-apps/iproute2-2.6.24.20080108" all
> deleted normal...
The current iproute version uses "protocol all" by default
if its not specified. This is actually only useful for creating
new filters, on deletion an unset protocol is treated as wildcard.
And last for now ..
cheers,
jamal
[PATCH 3/3] [TC/U32] Infrastructure for pretty printing
This patch makes it easy to add pretty printers of different protocols.
For starters it makes use of ipv4 and raw printers.
Add more later ...
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
makes protocol accessible ..
cheers,
jamal
[PATCH 2/3] [TC/FILTERS] Expose the filter protocol
Expose the filter protocol so it can be used by underlying
classifiers when they need it.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Don't break scripts that depend on previous offset/value format.
Introduce a new -pretty flag for decoding, and (*gasp*) document
the formatting arguments.
commit c504ffd627ac211eebf5ed34ef0fbfd7f1dbb347
Author: Patrick McHardy <kaber@trash.net>
Date: Wed Mar 26 07:38:43 2008 +0100
[IPROUTE]: Fix classifier help
The new check whether the user has specified a protocol makes
"ip filter <type> help" fails with "protocol is required".
This could be fixed by moving it further down, but a more user-friendly
way it to simply use ETH_P_ALL as default if nothing is specified.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Introducing the function that does the ATM cell alignment, and
modifying tc_calc_rtable() to use this based upon a linklayer
parameter.
Modified from original to use constants from atm.h and
fix all the usages of rtable in same patch.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
For police, implement overhead parameter parsing.
The change is ABI (Application Binary Interface) backward compatible
with older kernels, but will first have effect from kernel 2.6.24.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
For CBQ, implement overhead parameter parsing.
The change is ABI (Application Binary Interface) backward compatible
with older kernels, but will first have effect from kernel 2.6.24.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Change CBQ to use matches() function instead of strcmp().
This resembels the usage in other parse functions, and allows
partial command parameter matching.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
For TBF, implement overhead parameter parsing.
The change is ABI (Application Binary Interface) backward compatible
with older kernels, but will first have effect from kernel 2.6.24.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
update: Fix the spelling of "hexidecimal"
This updates the help output to specify that CLASSID should be hexidecimal.
This makes sure that a user entering "flowid 1:10" gets his flow put into
band 15 (0x10) and knows why.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
commit 94e9cba778cb97d77d9146dc3bd38ff195bc2c8a
Author: Patrick McHardy <kaber@trash.net>
Date: Sat Feb 2 18:22:16 2008 +0100
[IPROUTE]: cls_flow: add vlan-tag support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
[IPROUTE]: Add flow classifier support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
[...]
> Commands like "tc filter add dev ppp0 parent ffff: protocol ip prio 50
> u32 match ip src 0.0.0.0/0 police rate 4mbit burst 10k drop flowid :1"
> apparently no longer works. The flowid is not accepted anymore.
> Reverting commit 720a2e8d99... which you authored seems to "fix" this.
[...]
After further investigation it seems clear to me that reverting the
commit 720a2e8d990707749b2... is the correct thing to do, since the real
fix for the problem this commit was supposed to fix was instead fixed in
commit c29391c7c68f031e246c...
Whatever you specify after a u32 police you will now get a syntax error,
and according to "tc filter add u32 help" there are several things that
you are supposed to be able to specify after a police.
This reverts commit 720a2e8d99.
New iptables 1.4.0 has some library names changed from libipt to libxt.
It is prefferable also to open libxt_ first, as newer "style".
Signed-off-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Patrick McHardy, Cite: 'its better to overestimate than underestimate
to stay in control of the queue'.
Illustrating the rate table array:
Legend description
rtab[x] : Array index x of rtab[x]
xmit_sz : Transmit size contained in rtab[x] (normally transmit time)
maps[a-b] : Packet sizes from a to b, will map into rtab[x]
Current/old rate table mapping (cell_log:3):
rtab[0]:=xmit_sz:0 maps[0-7]
rtab[1]:=xmit_sz:8 maps[8-15]
rtab[2]:=xmit_sz:16 maps[16-23]
rtab[3]:=xmit_sz:24 maps[24-31]
rtab[4]:=xmit_sz:32 maps[32-39]
rtab[5]:=xmit_sz:40 maps[40-47]
rtab[6]:=xmit_sz:48 maps[48-55]
New rate table mapping, with kernel cell_align support.
rtab[0]:=xmit_sz:8 maps[0-8]
rtab[1]:=xmit_sz:16 maps[9-16]
rtab[2]:=xmit_sz:24 maps[17-24]
rtab[3]:=xmit_sz:32 maps[25-32]
rtab[4]:=xmit_sz:40 maps[33-40]
rtab[5]:=xmit_sz:48 maps[41-48]
rtab[6]:=xmit_sz:56 maps[49-56]
New TC util on a kernel WITHOUT support for cell_align
rtab[0]:=xmit_sz:8 maps[0-7]
rtab[1]:=xmit_sz:16 maps[8-15]
rtab[2]:=xmit_sz:24 maps[16-23]
rtab[3]:=xmit_sz:32 maps[24-31]
rtab[4]:=xmit_sz:40 maps[32-39]
rtab[5]:=xmit_sz:48 maps[40-47]
rtab[6]:=xmit_sz:56 maps[48-55]
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Change tc_calc_rtable() to take a tc_ratespec struct as an
argument. (cell_log still needs to be passed on as a parameter,
because -1 indicate that the cell_log needs to be computed by the
function.).
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
The only current user is HTB. HTB overhead argument is now passed on
to the kernel (in the struct tc_ratespec). Also correct the data
types.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Hello Stephen,
As the current maintainer of iproute2 package, you could be interested
in including the attached patch that allow using masks in the fw filter
of the tc utility (very useful at least for me). AFAK, it works at least
from iproute2 version 2.6.20-?. Feel free to make the appropriate
cleaning changes if necessary, or contact me if you see any trouble.
Best regards,
François Delawarde.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
tc_core_time2big only used in tc/q_netem.c where it gets passed an unsigned.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Follow up patch to "Fix overflow in time2tick / tick2time." which switches
the remaining two helper functions from long to unsigned as well.
These functions are only used in "tc/q_hfsc.c" where both the passed argument
and the place the return value is stored are unsigned/u32 variables, so this
change should be safe to make but hasn't been tested as extensively as the
time2tick patch.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
The helper functions gets passed an unsigned int, which gets cast to long
and overflows. See http://bugs.debian.org/175462
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
The help/usage screen of ematch cmp and nbyte say recognised symbolic
values for "layer FOO" are link, header and next-header, but the code
does _not_ implement that: it will recognise "next-header" as what is
supposed to be "header" and will not recognise "header". The right
symbolic values seem to be link, network, transport. Here is a patch
that changes the help/usage screen to match the code.
(http://bugs.debian.org/438653)
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
em_meta doesn't send 0 values to the kernel. breaking matching on them and
resulting in "Missing value TLV" messages on dump.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch applies on top of Patrick McHardy's RTNETLINK
patches to add nested compat attributes. This is needed to maintain
ABI for sch_{rr|prio} in the kernel with respect to tc. A new option,
namely multiqueue, was added to sch_prio and sch_rr. This will allow
a user to turn multiqueue support on for sch_prio or sch_rr at loadtime.
Also, tc qdisc ls will display whether or not multiqueue is enabled on
that qdisc. When in multiqueue mode, a user can specify a value of 0 for
bands, and the number of bands will be created to match the number of
queues on the device.
This patch is to support the new sch_rr (round-robin) qdisc being proposed
in NET for multiqueue network device support in the Linux network stack.
It uses q_prio.c as the template, since the qdiscs are nearly identical,
outside of the ->dequeue() routine.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
>>That command is from a script that used to work with iproute2-ss020116
>>(2002!), which had the following in tc/m_police.c:
>>
>>210 } else if (strcmp(*argv, "action") == 0) {
>>211 NEXT_ARG();
>>212 if (get_police_result(&p.action, &presult, *argv)) {
>>
>>I don't know when that bit was dropped, but it used to be there. :-)
>
>
>
> Indeed, I missed that. I'll fix up the patch ..
OK this patch fixes parsing of "action ...". I've removed
the erroring on unknown arguments again since in that case
the caller should continue parsing.
>
> Is it a bug that:
>
> # tc filter add dev eth0 parent 1: protocol ip prio 0 handle 0xfffffff
> fw police rate 1 burst 1 mpu 0 mtu 1 action drop
> ^^^^^^^^^^^
> creates a filter that looks like:
>
> # tc filter ls dev eth0
> filter parent 1: protocol ip pref 49152 fw
> filter parent 1: protocol ip pref 49152 fw handle 0xfffffff police 0x1
> rate 0bit burst 0b mtu 1b action reclassify
> ^^^^^^^^^^^^^^^^^
> ref -543190236 bind 4
>
> (which reclassifies and thus lets 0xfffffff-marked packets through).
>
> I'm pretty sure this used to work under 2.4.x (though I no longer have a
> 2.4 box to test with), but it hasn't worked on any of the 2.6.x kernels
> I've tried (with both iproute2-ss060323 and 070710).
Good catch. It seems this is merely a parsing error, iproute doesn't
have an "action" parameter and aborts parsing, so it uses the default
value of "RECLASSIFY". It never had this parameter, so this patch
removes it from the help text and makes it return an error.
Make netem static rather than shared library. It saves problems
on 64 bit platforms.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This one also makes sense for the release I guess.
-------- Original Message --------
Subject: Re: more iproute2 issues (not critical)
Date: Sat, 31 Mar 2007 16:16:56 +0200
From: Patrick McHardy <kaber@trash.net>
To: Denys <denys@visp.net.lb>
CC: Stephen Hemminger <shemminger@linux-foundation.org>,
netdev@vger.kernel.org
References: <20070321175951.M73913@visp.net.lb>
<46026717.9060909@trash.net> <20070322124533.M79867@visp.net.lb>
<46027FF2.6020001@trash.net> <20070322101224.3e6bb899@freekitty>
<20070331021401.M17326@visp.net.lb> <20070331023011.M8101@visp.net.lb>
Denys wrote:
> Ooops, sorry, it seems my fault, no library exist on this system.
> But i guess it must not coredump in this case? Is it possible to check if
> library not exist and just print some nice message?
> It is trivial i guess.
The problem is that lib_dir is NULL when calling get_target_names.
This patch fixes it.
[IPROUTE]: m_ipt: fix crash when dumping rules
lib_dir is NULL when calling get_target_name, causing a NULL pointer
dereference in the strlen call.
Signed-off-by: Patrick McHardy <kaber@trash.net>
In order to support these new flags add current
linux/if.h into the directory with the local copies.
This caused troubles with outdated redefinitions from net/if.h
so I've removed the dependency on it.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This reverts fd784ccaf6 commit.
Thanks Stephen, but actually I think the last patch (increase clock
resolution) shouldn't go in yet. I'm not done yet looking at all
the compatibility issues and it does change the range of valid
values for everything dealing with times. Most places I looked
at still accept reasonable ranges, but I would feel more comfortable
to make sure everything is fine first.
> It is in current git tree.
A small fix attached after some testing.
Please dont forget to apply my other patches. When you have them let me
know so i can do some more testing.
cheers,
jamal
[TC] Get iptables path selection to set correct path
A small tweak on top of Stephens patch
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Increase internal clock resolution to nsec
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Handle different kernel clock resolutions
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Add sprint_ticks() function and use in CBQ
Add helper function to print ticks to avoid assumptions about clock
resolution in CBQ.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Replace "usec" by "time" in function names
Rename functions containing "usec" since they don't necessarily return
usec units anymore.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Introduce TIME_UNITS_PER_SEC to represent internal clock resolution
Introduce TIME_UNITS_PER_SEC and conversion functions between internal
resolution and resolution expected by the kernel (currently implemented as
NOPs, only needed by HFSC, which currently always uses microseconds).
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Introduce tc_calc_xmitsize and use where appropriate
Add tc_calc_xmitsize() as complement to tc_calc_xmittime(), which calculates
the size that can be transmitted at a given rate during a given time.
Replace all expressions of the form "size = rate*tc_core_tick2usec(time))/1000000"
by tc_calc_xmitsize() calls.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: Use tc_calc_xmittime() where appropriate
Replace expressions of the form "tc_core_usec2tick(1000000 * size/rate)"
by tc_calc_xmittime().
The CBQ case deserves an extra comment: when called with bnwd=rate,
tc_cbq_calc_maxidle() behaves identical to tc_calc_xmittime():
unsigned tc_cbq_calc_maxidle(...)
{
double g = 1.0 - 1.0/(1<<ewma_log);
double xmt = (double)avpkt/bndw;
maxidle = xmt*(1-g);
if (bndw != rate && maxburst) {
...
}
return tc_core_usec2tick(maxidle*(1<<ewma_log)*1000000);
}
which comes down to:
maxidle = xmt * (1 - g)
= xmt * (1 - (1.0 - 1.0/(1 << ewma_log))
= xmt * (1.0/(1 << ewma_log))
so:
maxidle * (1 << ewma_log) * 1000000
= xmt * (1.0/(1 << ewma_log)) * (1 << ewma_log) * 1000000
= xmt * 1000000
= avpkt/bndw * 1000000
Which means tc_core_usec2tick(maxidle*(1<<ewma_log)*1000000) is identical
to tc_calc_xmittime(bndw, avpkt). Use it directly since its a lot easier
to understand its limits.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[IPROUTE]: tbf: fix latency printing
The calculated latency is already in usecs, the additional tick2usec
conversion breaks the calculation with jiffies or tsc clock source.
Example:
# tc qdisc add dev dummy0 root tbf latency 20ms burst 10k rate 50mbit
# tc qdisc show dev dummy0
qdisc tbf 8002: rate 50000Kbit burst 10Kb lat 15.4ms
Fixed:
# tc qdisc show dev dummy0
qdisc tbf 8002: rate 50000Kbit burst 10Kb lat 20ms
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
cheers,
jamal
[ALL] update rest to use nl_mgrp
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
if a file fails to compile in a subdir of iproute2 fails (say "tunnel.c" in
the "ip" dir), the top level makefile does not abort:
all: Config
@for i in $(SUBDIRS); \
do $(MAKE) $(MFLAGS) -C $$i; done
the attached patch inserts a 'set -e' so that if the $(MAKE) fails, the all
target fails as well
-mike
When using tc to change netem attributes, only those values
on the command line should be passed down, others should
remain unchanged.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* "tc [class|qdisc|filter] get" doesn't exist, remove it from inline help.
* Add "replace" to "tc [class|filter] get" inline help.
* Fix "tc [class|qdisc|filter] help" output:
~$ tc class help
[snip]
Command "help" is unknown, try "tc class help".
~$
with my best wishes,
--
Hasso Tepper
Elion Enterprises Ltd. [AS3249]
Data Communication Network Administrator
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[U32] Fix missing class/flowid oddity
When an action or policer is specified but not a classid/flowid, the
syntax accepts it but the kernel never really hits it.
This has been a long standing problem, but thanks to the persistence
of Marco Berizzi <pupilla@hotmail.com> I broke down and fixed it.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
User runs "tc monitor" (without quotes) and watches events of
addition, deletion and updates from qdiscs, classes, filters and
actions as they happen.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Hi jamal,
I found some spare time to play around a bit more with you ipt action stuff.
I've tested the patch attached with the testcase here below. It works
fine here. It fixes broken target option checkings (final_check) and a
leak in the merge_options function. I've killed copy_options since I
didn't find any reason why we need it.
--- test.sh ---
tc qdisc del dev wlan0 ingress
tc qdisc add dev wlan0 ingress
tc filter add dev wlan0 parent ffff: protocol ip prio 6 u32 \
match ip src 192.168.0.2/32 flowid 1:16 \
action ipt -j TOS --set-tos Maximize-Reliability
sleep 3
tc -s filter ls dev wlan0 parent ffff:
--- end of test.sh ---
Results:
tablename: mangle hook: NF_IP_PRE_ROUTING
target: TOS set Maximize-Reliability index 0
filter protocol ip pref 6 u32
filter protocol ip pref 6 u32 fh 800: ht divisor 1
filter protocol ip pref 6 u32 fh 800::800 order 2048 key ht 800 bkt 0
flowid 1:16
match c0a80002/ffffffff at 12
action order 1: tablename: mangle hook: NF_IP_PRE_ROUTING
target TOS set Maximize-Reliability
index 18 ref 1 bind 1 installed 3 sec used 0 sec
Action statistics:
Sent 725 bytes 7 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
Now, check if options passed to the target are correct.
# tc filter add dev wlan0 parent ffff: protocol ip prio 6 u32 \
match ip dst 192.168.0.2/32 flowid 1:16 \
action ipt -j TOS --set-tos
^^^
missing parameter
ipt: option `--set-tos' requires an argument
tc-ipt v0.1: TOS target: Parameter --set-tos is required
Try `tc-ipt -h' or 'tc-ipt --help' for more information.
btw, how's your schedule ? did you finally get spare time to come to the
netfilter workshop in seville ?
bye,
Pablo
