This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This has a slight side-effect of not aborting when /proc/net/dev is
malformed, but OTOH stats are not parsed for uninteresting interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This makes output consistent with iptunnel, also supporting reverse DNS
lookup for remote address if requested.
Signed-off-by: Phil Sutter <phil@nwl.cc>
In iptunnel, declare loop variables inside the loop as done in
ip6tunnel.
Fix and simplify goto logic in ip6tunnel:
- Failure to read over header lines would have left fp opened.
- By returning directly upon fopen() failure, fp can be closed
unconditionally in the end.
Use the same goto logic in iptunnel, as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Instead of duplicating the same code six times (key, ikey and okey in
iptunnel and ip6tunnel), have a common parsing routine. This has the
added benefit of having the same verbose error message in ip6tunnel as
well as iptunnel.
I'm not sure if parsing an IPv4 address as key makes sense for
ip6tunnel, but the code was there before so this patch at least doesn't
make it worse.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Put whitespace in the beginning of optional parts, not as suffix
anywhere. Also drop double whitespaces in between words.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>
- any ipv6 tunnel mode (proto == 0) could not be set
due to incomplete set of cases in do_add, do_del.
- vti6 logic was inverted: it was using "ip6_vti0" basedev
UNLESS mode is set to vti6.
We don't need a switch by p.proto in do_add()/do_del(): it
already exists in parse_args(). So if parse_args() call
was successful, no need to check tunnel mode again.
Signed-off-by: Alexey Andriyanov <alan@al-an.info>
'ip -oneline tunnel show' was not "oneline" for GRE tunnels with iseq:
# ip tun add gre_test remote 1.1.1.1 local 2.2.2.2 mode gre iseq oseq
# ip -oneline tun show gre_test | wc -l
2
The problem existed because of a typo: '\n' was printed when it shouldn't be.
Fixed.
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported by Robert Henney:
> the 'ip' man page does not mention the command "del" at all but does
> claim, "As a rule, it is possible to add, delete and show (or list ) objects".
> however, 'ip' does not always recognize "delete" as a commend.
>
> robh@debian:~$ ip tunnel delete
> Command "delete" is unknown, try "ip tunnel help".
Lets use "delete" in all calls to matches() for consistency. This will
make both "del" and "delete" work everywhere.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When changing ip6ip6 parameters (ip -6 tun change), ip passes zeroed
struct ip6_tnl_parm to the kernel. The kernel then tries to change all of
the tunnel parameters to the passed values, including zeroing of local and
remote address. This fails (-EEXIST in net/ipv6/ip6_tunnel.c:ip6_tnl_ioctl).
For other tunnel types, ip fetches the current parameters first and applies
the required changes on top of them. This patch applies the same code as in
ip/iptunnel.c to ip/ip6tunnel.c.
See http://bugzilla.redhat.com/730627 for the original bug report.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
"ip -6 tunnel show" displays only ip6ip6 tunnels not ip4ip6 tunnels
- it should display all irrespective of proto.
This is because the default tunnel proto is initialized to IPPROTO_IPV6 in ip6_tnl_parm_init() which is fine for a 'add' command but not for 'show'. This patch overrides proto with 0 signifying 'mode any' as the default in case of a 'show'.
Add more aliases to synchronize IPv4 and IPv6 tunnel command, e.g.,
IPv4: hoplimit (alias to ttl), tclass (alias to tos)
IPv6: dsfield, tos (alias to tc, or tclass), ttl (alias to hoplimit)
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Based on patch from Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Fix ip6tunnel.c to be fit with current ip command style.
Unlike other modules currently iptunnel (and ip6tunnel) is not
designed as protocol-independent because of unarranged structure
between IPv4 and IPv6.
Usage: ip -f inet6 tunnel { add | change | del | show } [ NAME ]
[ remote ADDR local ADDR ] [ dev PHYS_DEV ]
[ encaplimit ELIM ]
[ hoplimit HLIM ] [ tc TC ] [ fl FL ]
[ dscp inherit ]
Where: NAME := STRING
ADDR := IPV6_ADDRESS
ELIM := { none | 0..255 }(default=4)
HLIM := 0..255 (default=64)
TC := { 0x0..0xff | inherit }
FL := { 0x0..0xfffff | inherit }
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This file (ip6tunnel.c) is renamed from ipv6tunnel.c which is imported
from usagi cvs tree. It is originally ported by MIPL to work on their
2.4 kernel patch (MIPL1).
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
