Add the iproute2 support for the ACT_CSUM action. Can be used as
following, certainly in conjunction with the ACT_PEDIT action (pedit):
# In order to DNAT (stateless) IPv4 packet from 192.168.1.100 to
# 0x12345678 (18.52.86.120), and update the IPv4 header checksum and
# the UDP checksum (the last one, only if the packet is UDP).
tc filter add eth0 prio 1 protocol ip parent ffff: \
u32 match ip src 192.168.1.100/32 flowid :1 \
action pedit munge offset 16 u32 set 0x12345678 \
pipe csum ip and udp
# In order to alter destination address of IPv6 TCP packets from fc00::1
# and correct the TCP checksum (nothing happened? except maybe for
# checksums in the TCP payload ...).
tc filter add eth0 prio 1 protocol ipv6 parent ffff: \
u32 match ip6 src fc00::1/128 match ip6 protocol 0x06 0xff flowid :1 \
action pedit munge offset 24 u32 set 0x12345678 \
pipe csum tcp
We can use rxhash to classify the traffic into flows. As rxhash maybe
supplied by NIC or RPS, it is cheaper.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Provides ability to edit queue_mapping field
Provides ability to edit priority field
usage: action skbedit [queue_mapping QUEUE_MAPPING] [priority PRIORITY]
at least one option must be select, or both at the same time
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Introducing the function that does the ATM cell alignment, and
modifying tc_calc_rtable() to use this based upon a linklayer
parameter.
Modified from original to use constants from atm.h and
fix all the usages of rtable in same patch.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
commit 94e9cba778cb97d77d9146dc3bd38ff195bc2c8a
Author: Patrick McHardy <kaber@trash.net>
Date: Sat Feb 2 18:22:16 2008 +0100
[IPROUTE]: cls_flow: add vlan-tag support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
[IPROUTE]: Add flow classifier support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
This patch includes support for the Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) per RFC4214.
The following diffs are specific to the iproute2-2.6.23
software distribution. This message includes the full and
patchable diff text; please use this version to apply patches.
Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This is a resend of the iproute VLAN patch with the if_link.h changes
edited out since the headers are already synced.
[IPROUTE]: VLAN support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This patch applies on top of Patrick McHardy's RTNETLINK
patches to add nested compat attributes. This is needed to maintain
ABI for sch_{rr|prio} in the kernel with respect to tc. A new option,
namely multiqueue, was added to sch_prio and sch_rr. This will allow
a user to turn multiqueue support on for sch_prio or sch_rr at loadtime.
Also, tc qdisc ls will display whether or not multiqueue is enabled on
that qdisc. When in multiqueue mode, a user can specify a value of 0 for
bands, and the number of bands will be created to match the number of
queues on the device.
This patch is to support the new sch_rr (round-robin) qdisc being proposed
in NET for multiqueue network device support in the Linux network stack.
It uses q_prio.c as the template, since the qdiscs are nearly identical,
outside of the ->dequeue() routine.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Update the included version of the genetlink.h header to the multicast
group API and make the generic netlink controller part show multicast
groups where applicable. Also fix two typos.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
In order to support these new flags add current
linux/if.h into the directory with the local copies.
This caused troubles with outdated redefinitions from net/if.h
so I've removed the dependency on it.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Update kernel headers to be versions from 2.6.20.y
Solve cross compile build problems with x_tables and netfilter.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Stepehen,
Didnt hear back from you, please apply this one; needed for the next
patches.
cheers,
jamal
[GENL] Update generic netlink header
The header file needs to be uptodate with recent changes to allow
for forward compatibility
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Fix ip6tunnel.c to be fit with current ip command style.
Unlike other modules currently iptunnel (and ip6tunnel) is not
designed as protocol-independent because of unarranged structure
between IPv4 and IPv6.
Usage: ip -f inet6 tunnel { add | change | del | show } [ NAME ]
[ remote ADDR local ADDR ] [ dev PHYS_DEV ]
[ encaplimit ELIM ]
[ hoplimit HLIM ] [ tc TC ] [ fl FL ]
[ dscp inherit ]
Where: NAME := STRING
ADDR := IPV6_ADDRESS
ELIM := { none | 0..255 }(default=4)
HLIM := 0..255 (default=64)
TC := { 0x0..0xff | inherit }
FL := { 0x0..0xfffff | inherit }
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[IPROUTE]: Add support for larger number of routing tables
Support support for 2^32 routing tables by using the new RTA_TABLE
attribute for specifying tables > 255 and intepreting it if it is
sent by the kernel.
When tables > 255 are used on a kernel not supporting it an error will
occur because of the unknown netlink attribute.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The controller is the only module using this at the moment.
Thomas has a sample user of genetlink that would fit here; bug him
for it.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
