We need limits.h for LONG_MIN and LONG_MAX, sys/param.h for MIN and
sys/select for struct timeval.
This fixes the following compile errors with musl libc:
f_bpf.c: In function 'bpf_parse_opt':
f_bpf.c:181:12: error: 'LONG_MIN' undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
...
tc_util.o: In function `print_tcstats2_attr':
tc_util.c:(.text+0x13fe): undefined reference to `MIN'
tc_util.c:(.text+0x1465): undefined reference to `MIN'
tc_util.c:(.text+0x14ce): undefined reference to `MIN'
tc_util.c:(.text+0x154c): undefined reference to `MIN'
tc_util.c:(.text+0x160a): undefined reference to `MIN'
tc_util.o:tc_util.c:(.text+0x174e): more undefined references to `MIN' follow
...
tc_stab.o: In function `print_size_table':
tc_stab.c:(.text+0x40f): undefined reference to `MIN'
...
fdb.c:247:30: error: 'ULONG_MAX' undeclared (first use in this function)
(vni >> 24) || vni == ULONG_MAX)
^
lnstat.h:28:17: error: field 'last_read' has incomplete type
struct timeval last_read; /* last time of read */
^
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
The `bridge monitor file FILENAME' reads dumped netlink messages from
a file. But it forgot to close the file after using it. This patch
fixes it.
Signed-off-by: Petr Písař <ppisar@redhat.com>
Add support for the bridge fdb replace command to replace an
existing entry in the vxlan device driver forwarding data base.
The entry is identified with its unicast mac address and its
corresponding remote destination information is updated.
This is useful for virtual machine migration and replaces the
bridge fdb del and bridge fdb add commands.
It follows the same interface as ip neigh replace commands.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
The bridge fdb command line help and the bridge.8
man page are outdated in regards to the vxlan support.
The patch updates both the command line help for the
bridge command and its man page.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Use IFLA_AF_SPEC nested attributes to lookup bridge mode and when
doing strcmp() check for equality.
These appear to be typos from the original commit,
commit 64108901b7
Author: Vlad Yasevich <vyasevic@redhat.com>
Date: Fri Mar 15 10:01:28 2013 -0700
bridge: Add support for setting bridge port attributes
Also set flags to BRIDGE_FLAGS_SELF instead of using OR operation.
This allows setting the bridge mode when not being used with a
master device.
To allow setting both master and self devices simultaneously we
will need to add a {self|master} field similar to fdb commands.
For now the command sets are mutually exclusive as noted in the
original commit.
With this patch 'bridge link set' works now,
# ./bridge/bridge link set dev veth1 cost 3
# ./bridge/bridge link show
10: veth1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master bridge0 state forwarding priority 3 cost 3
CC: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
This patch allows setting the "NTF_ROUTER" flag in VXLAN forwarding table
entries to enable L3 switching for router destinations while still allowing
L2 redirection appliances for non-router MAC destinations.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
iproute2 patch to generalize VXLAN forwarding tables
This is the iproute2 support allowing an administrator to specify alternate
ports, vnis and outgoing interfaces for VXLAN device forwarding tables.
Changes since v3: changed NDA_PORT to be 16-bit network byte order to match
changed byte-order/size in the VXLAN driver.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
Add netlink support bridge port attributes such as cost, priority, state
and flags. This also adds support for HW mode such as VEPA or VEB.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.
To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.
# bridge vlan add dev eth0 vid 10 pvid untagged brdev
# bridge vlan add
# bridge vlan delete dev eth0 vid 10
# bridge vlan show
This command supports the following flags:
master - peform the operation on the software bridge device. This is
the default behavior.
self - perform the operation on the hardware associated with the port.
This flag is required when the device is the bridge device and
the configuration is desired on the bridge device itself (not
one of the ports).
pvid - Set the PVID (port vlan id) for a given port. Any untagged
frames arriving on the port will be assigned to this vlan.
untagged - Sets the egress policy of for a given vlan. Default port
egress policy is tagged. Set this flag if you wish traffic
associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
This is the iproute2 support allowing an administrator to specify alternate
ports, vnis and outgoing interfaces for VXLAN device forwarding tables.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
This patch implements `bridge monitor mdb`.
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch implements:
bridge mdb { add | del } dev DEV port PORT grp GROUP
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Sample output:
# ./bridge/bridge mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
# ./bridge/bridge -d mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
router ports on br0: eth0
Signed-off-by: Cong Wang <amwang@redhat.com>
Replace and change are not supported by bridge netlink so remove it
from bridge tool options.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Add command to update and print FDB entries with NTF_SELF and
NTF_MASTER set.
Example usages illustrating use of 'self' to program embedded
forwarding table and 'master' to configure the forwarding table
of the bridge. Also shows 'master self' used to update both in
the same command.
#./br/br fdb add 00:1b:21:55:23:60 dev eth3 self
#./br/br fdb add 00:1b:21:55:23:60 dev eth3 master
#./br/br fdb add 00:1b:21:55:23:61 dev eth3 self master
#./br/br fdb add 00:1b:21:55:23:62 dev eth3
#./br/br fdb show
eth3 00:1b:21:55:23:60 local self
eth3 00:1b:21:55:23:61 local self
eth3 33:33:00:00:00:01 local self
eth3 01:00:5e:00:00:01 local self
eth3 33:33:ff:55:23:59 local self
eth3 01:00:5e:00:00:fb local self
eth33 33:33:00:00:00:01 local self
eth34 33:33:00:00:00:01 local self
eth3 00:1b:21:55:23:59 local master
eth3 00:1b:21:55:23:60 static master
eth3 00:1b:21:55:23:62 static master
eth3 00:1b:21:55:23:61 static master
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
The bridge command used to be called br but was renamed bridge. Correct
the outdated references to the br name in the help messages, together with a
typo of '-help' for 'help'.
Signed-off-by: Chris Webb <chris@arachsys.com>
