Add ability to associate a policer with a trap group. The policer can be
unbound by using the 'nopolicer' keyword. In which case, the value
encoded in the 'DEVLINK_ATTR_TRAP_POLICER_ID' attribute will be '0'.
This is consistent with ip-link 'nomaster' keyword and the 'IFLA_MASTER'
attribute.
Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops policer 2
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"policer": 2
} ]
}
}
# devlink trap group set netdevsim/netdevsim10 group l3_drops nopolicer
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap policer set command allows the user to set the parameters of
the packet trap policer, such as rate and burst size. Example:
# devlink trap policer set netdevsim/netdevsim10 policer 1 rate 1000 burst 32
The trap policer show command allows the user to get the current
parameters of an individual policer or a dump of all policers in case
one is not specified. When '-s' is specified the policer's statistics
are shown. Example:
# devlink -jps trap policer show netdevsim/netdevsim10 policer 1
{
"trap_policer": {
"netdevsim/netdevsim10": [ {
"policer": 1,
"rate": 1000,
"burst": 32,
"stats": {
"rx": {
"dropped": 53
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Recognize the new configuration option of the RED Qdisc, "nodrop". Add
support for passing flags through TCA_RED_FLAGS, and use it when passing
TC_RED_NODROP flag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce support for per-action hw stats type config.
This patch allows user to specify one of the following types of HW
stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner
disabled - no stats needed
Note that if "hw_stats" option is not passed, user does not care about
the type, just expects any type of stats.
Examples:
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 7 sec used 2 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
hw_stats disabled
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 11 sec used 4 sec
Action statistics:
Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 102 bytes 1 pkt
backlog 0b 0p requeues 0
hw_stats immediate
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a description of the `ip macsec offload` command used to select the
offloading mode on a macsec interface when the underlying device
supports it.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add description for filters on rdma statistics show command.
Also add a filter description on the help message of the command.
Additionally, fix some whitespace issue in the man page.
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add resource subcommand in the OBJECT section and a short
description for it.
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description to the vrf subcommand and a reference to the
dedicated man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for devlink health error recovery status monitoring.
Update devlink-monitor man page accordingly.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the FQ-PIE packet Scheduler
Principles:
- Packets are classified on flows.
- This is a Stochastic model (as we use a hash, several flows might
be hashed to the same slot)
- Each flow has a PIE managed queue.
- Flows are linked onto two (Round Robin) lists,
so that new flows have priority on old ones.
- For a given flow, packets are not reordered.
- Drops during enqueue only.
- ECN capability is off by default.
- ECN threshold (if ECN is enabled) is at 10% by default.
- Uses timestamps to calculate queue delay by default.
Usage:
tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ]
[ target TIME ] [ tupdate TIME ]
[ alpha NUMBER ] [ beta NUMBER ]
[ quantum BYTES ] [ memory_limit BYTES ]
[ ecn_prob PERCENTAGE ] [ [no]ecn ]
[ [no]bytemode ] [ [no_]dq_rate_estimator ]
defaults:
limit: 10240 packets, flows: 1024
target: 15 ms, tupdate: 15 ms (in jiffies)
alpha: 1/8, beta : 5/4
quantum: device MTU, memory_limit: 32 Mb
ecnprob: 10%, ecn: off
bytemode: off, dq_rate_estimator: off
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com>
Signed-off-by: V. Saicharan <vsaicharan1998@gmail.com>
Signed-off-by: Mohit Bhasi <mohitbhasi1998@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While at it, convert xfrm_xfrma_print and xfrm_encap_type_parse to use
the UAPI macros for encap_type as suggested by David Ahern, and add the
UAPI udp.h header (sync'd from ipsec-next to get the TCP_ENCAP_ESPINTCP
definition).
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Enable proper JSON output for the PIE Qdisc.
Use sprint_time() to print the value of tc_pie_xstats->delay.
Use the long double format specifier to print tc_pie_xstats->prob.
Also, fix the indentation in the oneline output of statistics and update
the man page to reflect this change.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the FQ Qdisc.
Use the "KEY VALUE" format for oneline output of statistics instead of
"VALUE KEY", and remove unnecessary commas from the output.
Use sprint_size() to print size values in fq_print_opt().
Use sprint_time64() to print time values in fq_print_xstats().
Also, update the man page to reflect the changes in the output format.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
"SRC VNI" is only one argument and should appear as such. Moreover, this
argument to the src_vni option is documented under three forms: "SRC_VNI",
"SRC VNI" and "VNI" in different places. Consistenly use the simplest form,
"VNI".
Fixes: c5b176e5ba ("bridge: fdb: add support for src_vni option")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PIE now uses per packet timestamps to calculate queuing
delay. The average dequeue rate based queue delay
calculation is now made optional. This patch adds the option
to enable or disable the use of Little's law to calculate
queuing delay.
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
tc-ematch.8 was missing the description of canid() ematch rule, so document
this.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extended match rules are currently supported by basic, flow and cgroup
filters, so update the man page.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PPP devices can be moved to different network namespaces. The feature
was added by commit 79c441ae505c ("ppp: implement x-netns support")
in Linux 4.3.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement setting and printing of action flags with single available flag
value "no_percpu" that translates to kernel UAPI TCA_ACT_FLAGS value
TCA_ACT_FLAGS_NO_PERCPU_STATS. Update man page with information regarding
usage of action flags.
Example usage:
# tc actions add action gact drop no_percpu
# sudo tc actions list action gact
total acts 1
action order 0: gact action drop
random type none pass val 0
index 1 ref 1 bind 0
no_percpu
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add document of accessing the MR counters into
the rdma-statistic man pages.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is a follow up of the commit eaefb07804 ("ipnetns: enable to dump
nsid conversion table").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is a follow up of the commit ebe3ce2fcc ("ipnetns: parse nsid as a
signed integer").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
By default, all devices are listed, not only the default group.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The ability to specify the source adresse for 'encap ip' / 'encap ip6'
was added in commit 94a8722f2f but the man
page was not updated.
Also fixes a missing page in ip-route.8.in.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend existing devlink reload command by adding option "netns" by which
user can instruct kernel to reload the devlink instance into specified
network namespace.
Example:
$ ip netns add testns1
$ devlink dev reload netdevsim/netdevsim10 netns testns1
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Similar to ip tool, add an option to devlink to operate under certain
network namespace. Unfortunately, "-n" is already taken, so use "-N"
instead.
Example:
$ devlink -N testns1 dev show
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support to lookup a neigh entry
using recently added support in the kernel using RTM_GETNEIGH
example:
$ip neigh get 10.0.2.4 dev test-dummy0
10.0.2.4 dev test-dummy0 lladdr de:ad:be:ef:13:37 PERMANENT
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to lookup a bridge fdb entry
using recently added support in the kernel using RTM_GETNEIGH
(and AF_BRIDGE family).
example:
$bridge fdb get 02:02:00:00:00:03 dev test-dummy0 vlan 1002
02:02:00:00:00:03 dev test-dummy0 vlan 1002 master bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The man page of ip-macsec and the existance of the tool makes it seem like
the user could just configure static keys once, and be done with it. That is
not the case. Some form or key management must be done in user space.
Add a note about that.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit 6df9c7a06a ("ss: add SK_MEMINFO_DROPS display") ss -m
displays also a drop counter for each socket.
This commit properly document it into the man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add document of setting the adaptive-moderation for the ib device.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add the command alias "change" to man page.
Don't show it on usage, since it is not commonly used.
Reported-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matteo Croce <mcroce@redhat.com>
Add document of accessing the QP counter, including bind/unbind a QP
to a counter manually or automatically, and dump counter statistics.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add documentation for the latest options, flags and txtime-delay, to the
taprio manpage.
This also adds an example to run tc in txtime offload mode.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Document the newly added option (skip_sock_check) on the etf man-page.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a man page describing the newly added TC mpls manipulation actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
