This patch aim to add basic checking functions for later iproute2
libbpf support.
First we add check_libbpf() in configure to see if we have bpf library
support. By default the system libbpf will be used, but static linking
against a custom libbpf version can be achieved by passing libbpf DESTDIR
to variable LIBBPF_DIR for configure.
Another variable LIBBPF_FORCE is used to control whether to build iproute2
with libbpf. If set to on, then force to build with libbpf and exit if
not available. If set to off, then force to not build with libbpf.
When dynamically linking against libbpf, we can't be sure that the
version we discovered at compile time is actually the one we are
using at runtime. This can lead to hard-to-debug errors. So we add
a new file lib/bpf_glue.c and a helper function get_libbpf_version()
to get correct libbpf version at runtime.
Signed-off-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The code for handling batches is largely the same across iproute2 tools.
Extract a helper to handle the batch, and adjust the tools to dispatch to
this helper. Sandwitch the invocation between prologue / epilogue code
specific for each tool.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement support for classifier/action terse dump using new TCA_DUMP_FLAGS
tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Set the flag when
user requested it with following example CLI (-br for 'brief'):
$ tc -s -br filter show dev ens1f0 ingress
filter protocol ip pref 49151 flower chain 0
filter protocol ip pref 49151 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter protocol ip pref 49152 flower chain 0
filter protocol ip pref 49152 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
filter and action (handle, cookie, etc.) and stats, if requested by the
user. The intention is to significantly improve rule dump rate by omitting
all static data that do not change after rule is created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Replace the iproute2 snapshot with a version string which is
autogenerated as part of the build process using git describe.
This will also allow seeing if the version of the command
is built from the same sources is as upstream.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
$ make CCOPTS=-fno-common
gcc ... -o ip
ld: rt_names.o (symbol from plugin): in function "rtnl_rtprot_n2a":
(.text+0x0): multiple definition of "numeric"; ip.o (symbol from plugin):(.text+0x0): first defined here
gcc ... -o tipc
ld: ../lib/libutil.a(utils.o):(.bss+0xc): multiple definition of `pretty';
tipc.o:tipc.c:28: first defined here
References: https://bugzilla.opensuse.org/1160244
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
All these assignments are later overwritten without reading in between,
so just drop them.
Fixes: 485d0c6001 ("tc: Add batchsize feature for filter and actions")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
The check used binary instead of boolean AND, which means colored output
was enabled only if the number of specified '-color' flags was odd.
Fixes: 2d165c0811 ("tc: implement color output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
When sending accumulated compound command results an error, check 'force'
option before exiting. Move return code check after putting batch bufs and
freeing iovs to prevent memory leak. Break from loop, instead of returning
error code to allow cleanup at the end of batch function. Don't reset ret
code on each iteration.
Fixes: 485d0c6001 ("tc: Add batchsize feature for filter and actions")
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add initial support for oneline mode in tc; actions, filters and qdiscs
will be gradually updated in the follow-up patches.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently in tc batch mode, only one command is read from the batch
file and sent to kernel to process. With this support, at most 128
commands can be accumulated before sending to kernel.
Now it only works for the following successive commands:
1. filter add/delete/change/replace
2. actions add/change/replace
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
Any iproute utility that uses any function from lib/utils.c needs
to declare its own resolve_hosts variable instance although it does
not need/use hostname resolving functionality (currently only 'ip'
and 'ss' commands uses this).
The patch declares single common instance of resolve_hosts directly
in utils.c so the existing ones can be removed (the same approach
that is used for timestamp_short).
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
This only replaces occurrences where the newly allocated memory is
cleared completely afterwards, as in other cases it is a theoretical
performance hit although code would be cleaner this way.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
This work follows upon commit 6256f8c9e4 ("tc, bpf: finalize eBPF
support for cls and act front-end") and takes up the idea proposed by
Hannes Frederic Sowa to spawn a shell (or any other command) that holds
generated eBPF map file descriptors.
File descriptors, based on their id, are being fetched from the same
unix domain socket as demonstrated in the bpf_agent, the shell spawned
via execvpe(2) and the map fds passed over the environment, and thus
are made available to applications in the fashion of std{in,out,err}
for read/write access, for example in case of iproute2's examples/bpf/:
# env | grep BPF
BPF_NUM_MAPS=3
BPF_MAP1=6 <- BPF_MAP_ID_QUEUE (id 1)
BPF_MAP0=5 <- BPF_MAP_ID_PROTO (id 0)
BPF_MAP2=7 <- BPF_MAP_ID_DROPS (id 2)
# ls -la /proc/self/fd
[...]
lrwx------. 1 root root 64 Apr 14 16:46 0 -> /dev/pts/4
lrwx------. 1 root root 64 Apr 14 16:46 1 -> /dev/pts/4
lrwx------. 1 root root 64 Apr 14 16:46 2 -> /dev/pts/4
[...]
lrwx------. 1 root root 64 Apr 14 16:46 5 -> anon_inode:bpf-map
lrwx------. 1 root root 64 Apr 14 16:46 6 -> anon_inode:bpf-map
lrwx------. 1 root root 64 Apr 14 16:46 7 -> anon_inode:bpf-map
The advantage (as opposed to the direct/native usage) is that now the
shell is map fd owner and applications can terminate and easily reattach
to descriptors w/o any kernel changes. Moreover, multiple applications
can easily read/write eBPF maps simultaneously.
To further allow users for experimenting with that, next step is to add
a small helper that can get along with simple data types, so that also
shell scripts can make use of bpf syscall, f.e to read/write into maps.
Generally, this allows for prepopulating maps, or any runtime altering
which could influence eBPF program behaviour (f.e. different run-time
classifications, skb modifications, ...), dumping of statistics, etc.
Reference: http://thread.gmane.org/gmane.linux.network/357471/focus=357860
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Don't break scripts that depend on previous offset/value format.
Introduce a new -pretty flag for decoding, and (*gasp*) document
the formatting arguments.
User runs "tc monitor" (without quotes) and watches events of
addition, deletion and updates from qdiscs, classes, filters and
actions as they happen.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
