Implement support for action terse dump using new TCA_ACT_FLAG_TERSE_DUMP
value of TCA_ROOT_FLAGS tlv. Set the flag when user requested it with
following example CLI (-br for 'brief'):
$ tc -s -br actions ls action tunnel_key
total acts 2
action order 0: tunnel_key index 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 1: tunnel_key index 2
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
action (kind, index) and stats, if requested by the user.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement support for classifier/action terse dump using new TCA_DUMP_FLAGS
tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Set the flag when
user requested it with following example CLI (-br for 'brief'):
$ tc -s -br filter show dev ens1f0 ingress
filter protocol ip pref 49151 flower chain 0
filter protocol ip pref 49151 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter protocol ip pref 49152 flower chain 0
filter protocol ip pref 49152 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
filter and action (handle, cookie, etc.) and stats, if requested by the
user. The intention is to significantly improve rule dump rate by omitting
all static data that do not change after rule is created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the FQ-PIE packet Scheduler
Principles:
- Packets are classified on flows.
- This is a Stochastic model (as we use a hash, several flows might
be hashed to the same slot)
- Each flow has a PIE managed queue.
- Flows are linked onto two (Round Robin) lists,
so that new flows have priority on old ones.
- For a given flow, packets are not reordered.
- Drops during enqueue only.
- ECN capability is off by default.
- ECN threshold (if ECN is enabled) is at 10% by default.
- Uses timestamps to calculate queue delay by default.
Usage:
tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ]
[ target TIME ] [ tupdate TIME ]
[ alpha NUMBER ] [ beta NUMBER ]
[ quantum BYTES ] [ memory_limit BYTES ]
[ ecn_prob PERCENTAGE ] [ [no]ecn ]
[ [no]bytemode ] [ [no_]dq_rate_estimator ]
defaults:
limit: 10240 packets, flows: 1024
target: 15 ms, tupdate: 15 ms (in jiffies)
alpha: 1/8, beta : 5/4
quantum: device MTU, memory_limit: 32 Mb
ecnprob: 10%, ecn: off
bytemode: off, dq_rate_estimator: off
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com>
Signed-off-by: V. Saicharan <vsaicharan1998@gmail.com>
Signed-off-by: Mohit Bhasi <mohitbhasi1998@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update man page to reflect the changes made in Linux.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sch_cake is intended to squeeze the most bandwidth and latency out of even
the slowest ISP links and routers, while presenting an API simple enough
that even an ISP can configure it.
Example of use on a cable ISP uplink:
tc qdisc add dev eth0 cake bandwidth 20Mbit nat docsis ack-filter
To shape a cable download link (ifb and tc-mirred setup elided)
tc qdisc add dev ifb0 cake bandwidth 200mbit nat docsis ingress wash besteffort
Cake is filled with:
* A hybrid Codel/Blue AQM algorithm, "Cobalt", tied to an FQ_Codel
derived Flow Queuing system, which autoconfigures based on the bandwidth.
* A novel "triple-isolate" mode (the default) which balances per-host
and per-flow FQ even through NAT.
* An deficit based shaper, that can also be used in an unlimited mode.
* 8 way set associative hashing to reduce flow collisions to a minimum.
* A reasonable interpretation of various diffserv latency/loss tradeoffs.
* Support for zeroing diffserv markings for entering and exiting traffic.
* Support for interacting well with Docsis 3.0 shaper framing.
* Support for DSL framing types and shapers.
* Support for ack filtering.
* Extensive statistics for measuring, loss, ecn markings, latency variation.
Various versions baking have been available as an out of tree build for
kernel versions going back to 3.10, as the embedded router world has been
running a few years behind mainline Linux. A stable version has been
generally available on lede-17.01 and later.
sch_cake replaces a combination of iptables, tc filter, htb and fq_codel
in the sqm-scripts, with sane defaults and vastly simpler configuration.
Cake's principal author is Jonathan Morton, with contributions from
Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen, Sebastian Moeller,
Ryan Mounce, Tony Ambardar, Dean Scarff, Nils Andreas Svee, Dave Täht,
and Loganaden Velvindron.
Testing from Pete Heist, Georgios Amanakis, and the many other members of
the cake@lists.bufferbloat.net mailing list.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add initial support for oneline mode in tc; actions, filters and qdiscs
will be gradually updated in the follow-up patches.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add description for -json and -pretty options.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
During qdisc creation it is possible to specify shared block for bot
ingress and egress. Pass this values to kernel according to the command
line options.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
So far, qdisc was the only handle that could be used to manipulate
filters. Kernel added support for using block to manipulate it. So add
the support to use block index to manipulate filters. The magic
TCM_IFINDEX_MAGIC_BLOCK indicates the block index is in use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
In addition to providing information about the mathcall filter and its
configurations, the man entry contains examples for creating port
mirorring entries.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Partially based on kernel Kconfig help text, code comments and
git commit messages from Eric Dumazet.
Joint work with Phil Sutter.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Some qdiscs still lack a manpage, so listing them here is the only way
for a user to get to know them. For the others, this serves as an
overview of what is there.
Content was taken over from the dedicated manpage if available and
suitable, so there is definitely room for improvement at least by
adjusting it more to the context in which it is now. In case there
wasn't appropriate wording available, I tried to identify key aspects of
the given qdisc.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add a start of a man-page to the misc section as a reference and
guide on (e)BPF classifier and actions. Given that tc is only tersely
documented, this is provided in the hope that users will have an
easier getting started with tc and (e)BPF. And, that there's now more
incentive for others to also start documenting their classifier and
actions as well. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
The tc command is missing documentation of -batch and -force switches
that are returned by "tc -help".
Add short description on their syntax and usage.
Rephrasing for clarity.
Note that in ip-rule.8 I rephrased a sentence to "The RPDB is scanned
in order of decreasing priority." The original version talked about
*in*creasing priority, but from the context that didn't make sense.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
- rename section UNITS to PARAMETERS.
- break section PARAMETERS down to four subsections to cover the
common used parameter types(RATES, TIMES, SIZES, VALUES).
- add some explaination for IEC units in RATES.
- point out the max value we can set for RATES, TIMES and SIZES.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Since the get_rate() code incorrectly interpreted bare number, the
behavior is not the same as man page and comment described.
We need to change the man page and comment for compatible with the
existing usage by scripts.
This makes 2 changes:
1: Add fq_codel to SEE ALSO section in tc manpage.
2: Reorder the SEE ALSO section to make the order alphabetical
(suggested by Jan Ceuleers ).
Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
<groff: tc.8>:51: warning: total indent cannot be negative
<groff: tc.8>:57: warning: escape character ignored before `i'
*********************
Space at end of line removed
General considerations
a) Manuals should usually only be left justified. Use ".ad l"
as the first regular command.
b) Each sentence should begin on a new line. The conventions
about the amount of space between sentences are different. This
also makes a check on the number of space characters between
words easier.
c) Separate numbers from units with a (no-break) space. A
no-break space can be code 0xA0, "\ " (\<space>), or "\~"
(groff).
d) Use macros "TS/TE" for tables with more than two columns.
Then use
'\" t
as the first line in the source to tell "man" to use the "tbl"
preprocessor.
e) Protect last period (full stop) in abbreviations with "\&",
if it is or might be (through new formatting of source) at the
end of line, if it is also not an end of sentence.
*********************
Originally filed at: http://bugs.debian.org/674704
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
