On some systems (e.g. current Debian/stable) the inclusion
of utils.h pulled in some other things that may end up
defining __aligned, in a possibly different way than what
we had here.
Use our own definition only if there isn't one already.
Fixes: d5acae244f ("libnetlink: add nl_print_policy() helper")
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This prints out the data from the given nested attribute
to the given FILE pointer, interpreting the firmware that
the kernel has for showing netlink policies.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
fread(3) returns size_t data type which is unsigned, thus check
`if (fread(...) < 0)' is always false. To check if fread(3) has
failed, user should check error indicator with ferror(3).
This commit also changes read logic a little bit by being less
forgiving for errors. Previous logic was checking if fread(3)
read *at least* required ammount of data, now code checks if
fread(3) read *exactly* expected ammount of data. This makes
sense because code parses very specific binary file, and reading
even 1 less/more byte than expected, will later corrupt data anyway.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
groups > 31 have to be joined using the setsockopt. Since the nexthop
group is 32, add a helper to allow 'ip monitor' to listen for nexthop
messages.
Signed-off-by: David Ahern <dsahern@gmail.com>
In the past, we tried to increase the buffer size up to 32 KB in order
to reduce number of syscalls per dump.
Commit 2d34851cd3 ("lib/libnetlink: re malloc buff if size is not enough")
brought the size back to 4KB because the kernel can not know the application
is ready to receive bigger requests.
See kernel commits 9063e21fb026 ("netlink: autosize skb lengthes") and
d35c99ff77ec ("netlink: do not enter direct reclaim from netlink_dump()")
for more details.
Fixes: 2d34851cd3 ("lib/libnetlink: re malloc buff if size is not enough")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While iproute2 correctly uses ifinfomsg struct as the ancillary header
when requesting an FDB dump on old kernels, it sets the message type to
RTM_GETLINK. This results in wrong reply being returned.
Fix this by using RTM_GETNEIGH instead.
Before:
$ bridge fdb show brport dummy0
Not RTM_NEWNEIGH: 00000158 00000010 00000002
After:
$ bridge fdb show brport dummy0
2a:0b:41:1c:92:d3 vlan 1 master br0 permanent
2a:0b:41:1c:92:d3 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 05880354c2 ("bridge: fdb: Fix filtering with strict checking disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: LiLiang <liali@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Without this fix, the VF info can't be showed using command
"ip link".
146: ens1f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 24:8a:07:ad:78:52 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 02:25:d0:12:01:01, spoof checking off, link-state auto, trust off, query_rss off
vf 1 MAC 02:25:d0:12:01:02, spoof checking off, link-state auto, trust off, query_rss off
Fixes: d97b16b2c9 ("libnetlink: linkdump_req: Only AF_UNSPEC family expects an ext_filter_mask")
Signed-off-by: Chris Mi <chrism@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge command 'vlan show' calls rtnl_linkdump_req_filter for
family AF_BRIDGE. Update rtnl_linkdump_req_filter to send the filter
for that family as well.
Fixes: d97b16b2c9 ("libnetlink: linkdump_req: Only AF_UNSPEC family expects an ext_filter_mask")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Add RTNL_HANDLE_F_STRICT_CHK flag and set in rth flags to let know
commands know if the kernel supports strict checking.
Extracted from patch from Ido to fix filtering with strict checking
enabled.
Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add filter function to rtnl_neighdump_req and a buffer to the
request for the filter functions to append attributes.
Signed-off-by: David Ahern <dsahern@gmail.com>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter function to rtnl_addrdump_req to set device index in the
address dump request if the user is filtering addresses by device. In
addition, add a new ipaddr_link_get to do a single RTM_GETLINK request
instead of a device dump yet still store the data in the linfo list.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
Only AF_UNSPEC handled by rtnl_dump_ifinfo expects an ext_filter_mask
on a dump request. Update the linkdump request functions to only set
and send ext_filter_mask for AF_UNSPEC.
Signed-off-by: David Ahern <dsahern@gmail.com>
Change nlmsg_len from sizeof(req) to use NLMSG_LENGTH on the header.
2 of the inner headers are not 4-byte aligned, so add a 0-length buf
after the header with the __aligned(NLMSG_ALIGNTO) to ensure the size
of the request is large enough. Use NLMSG_ALIGN in NLMSG_LENGTH to set
nlmsg_len.
Signed-off-by: David Ahern <dsahern@gmail.com>
Print any extack message that has been appended to a NLMSG_DONE message.
To avoid duplication, move the existing print code to a new helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
When no error is reported in the first iov, do not prematurely return,
but process further iovs. This fixes batch processing.
Fixes: c60389e4f9 ("libnetlink: fix leak and using unused memory on error")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rntl_talk_extack and parse_rtattr_index not used in current code.
rtnl_dump_filter_l is only used in this file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
In __rtnl_talk_iov() main loop, err is a pointer to memory in dynamically
allocated 'buf' that is used to store netlink messages. If netlink message
is an error message, buf is deallocated before returning with error code.
However, on return err->error code is checked one more time to generate
return value, after memory which err points to has already been
freed. Save error code in temporary variable and use the variable to
generate return value.
Fixes: c60389e4f9 ("libnetlink: fix leak and using unused memory on error")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_nsiddump_req for namespace id dumps using the proper rtgenmsg
as the header. Convert existing RTM_GETNSID dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neightbldump_req for neighbor table dumps using the proper ndtmsg
as the header. Convert existing RTM_GETNEIGHTBL dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neighdump_req for neighbor dumps using the proper ndmsg
as the header. Convert existing rtnl_wilddump_request for RTM_GETNEIGH
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Change to error handling broke normal code.
Fixes: c60389e4f9 ("libnetlink: fix leak and using unused memory on error")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If an error happens in multi-segment message (tc only)
then report the error and stop processing further responses.
This also fixes refering to the buffer after free.
The sequence check is not necessary here because the
response message has already been validated to be in
the window of the sequence number of the iov.
Reported-by: Mahesh Bandewar <mahesh@bandewar.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Mahesh Bandewar <maheshb@google.com>
William reported ip hanging and bisected to a recent commit for batching
allowing more than 1 command to be sent per message. The loop over
recvmsg should never cycle more than iovlen times -- 1 response for
each command in the message.
Fixes: 72a2ff3916 ("lib/libnetlink: Add a new function rtnl_talk_iov")
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_talk can only send a single message to kernel. Add a new function
rtnl_talk_iov that can send multiple messages to kernel.
rtnl_talk_iov takes struct iovec * and iovlen as arguments.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel can now return non-fatal error messages in extack facility.
Update iproute2 to dump to use if present.
- rename nl_dump_ext_err to nl_dump_ext_ack
- rename errmsg to msg
- add call to nl_dump_ext_ack in rtnl_dump_done and __rtnl_talk for
non-error path
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
With commit 72b365e8e0 ("libnetlink: Double the dump buffer size")
we doubled the buffer size to support more VFs. But the VFs number is
increasing all the time. Some customers even use more than 200 VFs now.
We could not double it everytime when the buffer is not enough. Let's just
not hard code the buffer size and malloc the correct number when running.
Introduce function rtnl_recvmsg() to always return a newly allocated buffer.
The caller need to free it after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Both addattr_l() and rta_addattr_l() may be called with NULL data
pointer and 0 alen parameters. Avoid calling memcpy() in that case.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Initialize tb in nl_dump_ext_err since not all attributes will be
sent in the messages.
Add error checking on mnl_attr_parse and print messages on the off
chance the ext ack attributes fail to validate.
Signed-off-by: David Ahern <dsahern@gmail.com>
