This variable has the same name as `struct xfrm_filter filter` in
ip/ipxfrm.c, but overrides that definition since `struct rtfilter`
is larger.
This is visible when built with -Wl,--warn-common in LDFLAGS:
/usr/bin/ld: ipxfrm.o: warning: common of `filter' overridden by larger common from ipmroute.o
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Similar to other print functions we need to flush buffered data
in order to work with pipes and output redirects.
After this patch ip monitor mroute &>log works properly.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Similar to 'ip route' add the table id to the dump request for
kernel side filtering if it is supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If kernel does not support the IP multicast address family,
then it will report all routes (PF_UNSPEC).
Give the user a better error message and abort the command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Should be no change for non-json case except putting color
on address if desired.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since kernel net-next commit c7c0bbeae950 ("net: ipmr: Add MFC offload
indication") the kernel indicates on an MFC entry whether it was offloaded
using the RTNH_F_OFFLOAD flag. Update the "ip mroute show" command to
indicate when a route is offloaded, similarly to the "ip route show"
command.
Example output:
$ ip mroute
(0.0.0.0, 239.255.0.1) Iif: sw1p7 Oifs: t_br0 State: resolved offload
(192.168.1.1, 239.255.0.1) Iif: sw1p7 Oifs: sw1p4 State: resolved offload
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
When the user specifies `table all` or `table 0` to
the `ip mroute show` command we dump the entirety of
the known mroute tables. Without some sort of
divisor to tell us what table we are looking at
the command is useless.
Add `Table: <vrf name>` to the output of 'ip mroute show table 0'
Follow the convention established by 'ip route show table 0'
for when to display
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Use the new helper functions rta_getattr_u* instead of direct
cast of RTA_DATA(). Where RTA_DATA() is a structure, then remove
the unnecessary cast since RTA_DATA() is void *
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds a new field that is printed in the end of the line which
denotes the real entry state. Before this patch an entry's IIF could
disappear and it would look like an unresolved one (iif = unresolved):
(3.0.16.1, 225.11.16.1) Iif: unresolved
with no way to really distinguish it from an unresolved entry.
After the patch if the dumped entry has RTNH_F_UNRESOLVED set we get:
(3.0.16.1, 225.11.16.1) Iif: unresolved State: unresolved
for unresolved entries and:
(0.0.0.0, 225.11.11.11) Iif: eth4 Oifs: eth3 State: resolved
for resolved entries after the OIF list. Note that "State:" has ':' in
it so it cannot be mistaken for an interface name.
And for the example above, we'd get:
(0.0.0.0, 225.11.11.11) Iif: unresolved State: resolved
Also when dumping all routes via ip route show table all,
it will show up as:
multicast 225.11.16.1/32 from 3.0.16.1/32 table default proto 17 unresolved
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support to dump the mroute cache entry age if the show_stats (-s)
switch is provided.
Example:
$ ip -s mroute
(0.0.0.0, 239.10.10.10) Iif: eth0 Oifs: eth0
0 packets, 0 bytes, Age 245.44
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The command "ip mroute show" is not showing routes when "to" and/or "from"
filter is applied.
root@mazhar:~# ip mroute show
(10.202.30.101, 235.1.2.3) Iif: eth0 Oifs: eth1
But When I applied filter, it does not show anything.
root@mazhar:~# ip mroute show 235.1.2.3 from 10.202.30.101
root@mazhar:~#
Signed-off-by: Mazhar Rana <ranamazharp@gmail.com>
This flag is only for the netlink protocol (multi-part messages), no reason
to reject messages without it.
Note that this flag was removed by the following kernel patches (v3.14)
65886f439ab0 ipmr: fix mfc notification flags
f518338b1603 ip6mr: fix mfc notification flags
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
For some address families (like AF_PACKET) it is helpful to have the
length when prenting the address.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.
The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The command "ip mroute show" will only show the first Oif.
mark@flappie:~$ ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1
mark@flappie:~$ cat /proc/net/ip_mr_cache
Group Origin Iif Pkts Bytes Wrong Oifs
7B0000E0 0101A8C0 2 0 0 0 0:1 1:1
This shows 2 Oifs here. However, ipmroute.c, function read_mroute_list(), uses sscanf() with a %s mask for oiflist, which stops after the first whitespace (i.e. after Oif 0:1). The patch below fixes this to read until the newline (though I'm not sure whether this is the proper way to fix it).
After this patch:
mark@flappie:~/iproute-20090324/ip$ ./ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1 eth0
This patch originally submitted as http://bugs.debian.org/550097
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
