Add json support on iptunnel and ip6tunnel.
The plain text output format should remain the same.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
print_tunnel() functions in ip6tunnel.c and iptunnel.c contains
the same code to print out GRE key and flags
This commit factorize the code in a helper function in tunnel.c
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tunnel change fails if a tunnel name is not specified while using
'ip -6 tunnel change'. However, no warning message is printed and
no error code is returned.
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
This commit checks if tunnel interface name is equal to an empty
string: in this case, it prints a warning message to the user.
It intentionally avoids to return an error to not break existing
script setup.
This is the output after this commit:
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
Tunnel interface name not specified
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This reverts commit ba126dcad2.
It breaks tunnel creation when using 'dev' parameter:
$ ip link add type dummy
$ ip -6 tunnel add ip6tnl1 mode ip6ip6 remote 2001:db8:ffff💯:2 local 2001:db8:ffff💯:1 hoplimit 1 tclass 0x0 dev dummy0
add tunnel "ip6tnl0" failed: File exists
dev parameter must be used to specify the device to which
the tunnel is binded, and not the tunnel itself.
Reported-by: Jianwen Ji <jiji@redhat.com>
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Inclusion of 'dev' is allowed by the syntax but not handled
correctly by the command. It produces no output for show
command and falsely successful for change command but does
not make any changes.
can be verified with the following steps
# ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none
# ip -6 tunnel show ip6tnl1
<correct output>
# ip -6 tunnel show dev ip6tnl1
<no output but correct output after this change>
# ip -6 tunnel change dev ip6tnl1 local 2001🔢:1 remote 2001🔢:2 encaplimit none ttl 127 tos inherit allow-localremote
# echo $?
0
# ip -6 tunnel show ip6tnl1
<no changes applied, but changes are correctly applied after this change>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both tunnels use legacy /proc/net/dev interface to get tunnel device and
it's statistics. This may cause problems for cases when procfs either
not mounted or not unshare(2)d for given network namespace.
Use netlink to walk through list of tunnel devices which is network
namespace aware and provides additional information such as statistics
in the dump message.
Since both address family specific variants of do_tunnels_list() nearly
the same, except for tunnel parameters structure initialization,
matching and printing we can introduce common one in tunnel.c.
To implement address family specific parts introduce new data structure
@struct tnl_print_nlmsg_info what contains all necessary information as
well as pointers to ->init(), ->match() and ->print() callbacks.
Annotate data structures by const where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use switch () instead of if () to compare tunnel type to fit into 80
columns and make code more readable. Print "\n" using fputc().
In iptunnel.c abstract tunnel parameters matching code in iptunnel.c
into ip_tunnel_parm_match() helper to conform with ip6tunnel.c. Use
memset() to initialize @p1.
In ip6tunnel.c no need to call ll_name_to_index() with name twice: just
use found previously index. Do not initialize @p1: this is done in
ip6_tnl_parm_init().
This is to show real differences between ip and ipv6 do_tunnels_list()
implementations and prepare for upcoming unification of them.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is first step to move tunnel code to use rtnl dump interface
instead of /proc/net/dev read.
Make tnl_print_stats() to accept @struct rtnl_link_stats64 parameter,
introduce tnl_get_stats() that will parse line from /proc/net/dev into
@struct rtnl_link_stats64.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Manual page ip-link(8) states that both local and remote accept
IPADDR not PREFIX. Use get_addr() instead of get_prefix() to
parse local/remote endpoint address correctly.
Force corresponding address family instead of using preferred_family
to catch weired cases as shown below.
Before this patch it is possible to create tunnel with commands:
ip li add dev ip6gre2 type ip6gre local fe80::1/64 remote fe80::2/64
ip -4 li add dev ip6gre2 type ip6gre local 10.0.0.1/24 remote 10.0.0.2/24
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
IP6_TNL_F_ALLOW_LOCAL_REMOTE allows tunnel traffic on ip6tnl devices
where the remote endpoint is a local host address.
Specifying "[no]allow-localremote" controls the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on ip6tnl interfaces.
This is the user-space counterpart for kernel
commit 908d140a87a7 ("ip6_tunnel: Allow rcv/xmit even if remote address is a local address")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Signed-off-by: Phil Sutter <phil@nwl.cc>
In both files' parse_args() functions as well as in iptunnel's do_prl()
and do_6rd() functions, a user-supplied 'dev' parameter is uselessly
copied into a temporary buffer before passing it to ll_name_to_index()
or copying into a struct ifreq. Avoid this by just caching the argv
pointer value until the later lookup/strcpy.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Show ipv6 tunnel keys on presence of GRE_KEY flag for tunnel types
other than GRE. Aligns ipv6 behaviour with ipv4.
Signed-off-by: dforster@brocade.com
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This has a slight side-effect of not aborting when /proc/net/dev is
malformed, but OTOH stats are not parsed for uninteresting interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This makes output consistent with iptunnel, also supporting reverse DNS
lookup for remote address if requested.
Signed-off-by: Phil Sutter <phil@nwl.cc>
In iptunnel, declare loop variables inside the loop as done in
ip6tunnel.
Fix and simplify goto logic in ip6tunnel:
- Failure to read over header lines would have left fp opened.
- By returning directly upon fopen() failure, fp can be closed
unconditionally in the end.
Use the same goto logic in iptunnel, as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Instead of duplicating the same code six times (key, ikey and okey in
iptunnel and ip6tunnel), have a common parsing routine. This has the
added benefit of having the same verbose error message in ip6tunnel as
well as iptunnel.
I'm not sure if parsing an IPv4 address as key makes sense for
ip6tunnel, but the code was there before so this patch at least doesn't
make it worse.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Put whitespace in the beginning of optional parts, not as suffix
anywhere. Also drop double whitespaces in between words.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>
- any ipv6 tunnel mode (proto == 0) could not be set
due to incomplete set of cases in do_add, do_del.
- vti6 logic was inverted: it was using "ip6_vti0" basedev
UNLESS mode is set to vti6.
We don't need a switch by p.proto in do_add()/do_del(): it
already exists in parse_args(). So if parse_args() call
was successful, no need to check tunnel mode again.
Signed-off-by: Alexey Andriyanov <alan@al-an.info>
'ip -oneline tunnel show' was not "oneline" for GRE tunnels with iseq:
# ip tun add gre_test remote 1.1.1.1 local 2.2.2.2 mode gre iseq oseq
# ip -oneline tun show gre_test | wc -l
2
The problem existed because of a typo: '\n' was printed when it shouldn't be.
Fixed.
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported by Robert Henney:
> the 'ip' man page does not mention the command "del" at all but does
> claim, "As a rule, it is possible to add, delete and show (or list ) objects".
> however, 'ip' does not always recognize "delete" as a commend.
>
> robh@debian:~$ ip tunnel delete
> Command "delete" is unknown, try "ip tunnel help".
Lets use "delete" in all calls to matches() for consistency. This will
make both "del" and "delete" work everywhere.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When changing ip6ip6 parameters (ip -6 tun change), ip passes zeroed
struct ip6_tnl_parm to the kernel. The kernel then tries to change all of
the tunnel parameters to the passed values, including zeroing of local and
remote address. This fails (-EEXIST in net/ipv6/ip6_tunnel.c:ip6_tnl_ioctl).
For other tunnel types, ip fetches the current parameters first and applies
the required changes on top of them. This patch applies the same code as in
ip/iptunnel.c to ip/ip6tunnel.c.
See http://bugzilla.redhat.com/730627 for the original bug report.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
"ip -6 tunnel show" displays only ip6ip6 tunnels not ip4ip6 tunnels
- it should display all irrespective of proto.
This is because the default tunnel proto is initialized to IPPROTO_IPV6 in ip6_tnl_parm_init() which is fine for a 'add' command but not for 'show'. This patch overrides proto with 0 signifying 'mode any' as the default in case of a 'show'.
Add more aliases to synchronize IPv4 and IPv6 tunnel command, e.g.,
IPv4: hoplimit (alias to ttl), tclass (alias to tos)
IPv6: dsfield, tos (alias to tc, or tclass), ttl (alias to hoplimit)
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
