User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
Add the iproute2 support for the ACT_CSUM action. Can be used as
following, certainly in conjunction with the ACT_PEDIT action (pedit):
# In order to DNAT (stateless) IPv4 packet from 192.168.1.100 to
# 0x12345678 (18.52.86.120), and update the IPv4 header checksum and
# the UDP checksum (the last one, only if the packet is UDP).
tc filter add eth0 prio 1 protocol ip parent ffff: \
u32 match ip src 192.168.1.100/32 flowid :1 \
action pedit munge offset 16 u32 set 0x12345678 \
pipe csum ip and udp
# In order to alter destination address of IPv6 TCP packets from fc00::1
# and correct the TCP checksum (nothing happened? except maybe for
# checksums in the TCP payload ...).
tc filter add eth0 prio 1 protocol ipv6 parent ffff: \
u32 match ip6 src fc00::1/128 match ip6 protocol 0x06 0xff flowid :1 \
action pedit munge offset 24 u32 set 0x12345678 \
pipe csum tcp
The default remains at 10 for backwards compatibility.
For instance:
# ip addr flush dev eth2
*** Flush remains incomplete after 10 rounds. ***
# ip -l 20 addr flush dev eth2
*** Flush remains incomplete after 20 rounds. ***
# ip -loops 0 addr flush dev eth2
#
This is useful for getting rid of large numbers of IP
addresses in scripts.
Signed-off-by: Ben Greear <greearb@candelatech.com>
We can use rxhash to classify the traffic into flows. As rxhash maybe
supplied by NIC or RPS, it is cheaper.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Unless promote_secondaries has been active deleting the primary address of
an interface will automatically delete all the secondary addresses.
In the case where ip flush requests the primary then secondary addresses to
be removed - which is the order the addresses are returned by the kernel -
this will cause an error as by the time the request to remove a secondary
address is made it will be missing as it will have been deleted in the
course of deleting the primary address.
This approach to solving this problem orders requests for the
deletion of secondary addresses before primary ones providing
rtnl_dump_filter_l(), a version of rtnl_dump_filter() that
iterates over a list of filters. And by providing two specialised
filters print_addrinfo_secondary() and print_addrinfo_primary().
rtnl_dump_filter_l() first iterates over all addresses using
print_addrinfo_secondary(), which appends secondary addresses to the
request buffer. Then again using print_addrinfo_primary() which appends
primary addresses.
This approach should work regardless of it promote_secondaries is
active or not. And regardless of if any primary of secondary addresses
are present or not.
Signed-off-by: Simon Horman <horms@verge.net.au>
After calling ll_init_map, all of the information stored in the link-layer map
can be retrieved by function calls (ll_index_to_*), except for the link-layer
address. This patch fills the gap by adding a ll_index_to_addr function.
Changes welcome.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
The iptables code supports a "no shared libs" mode where it can be used
without requiring dlfcn related functionality. This adds similar support
to iproute2 so that it can easily be used on systems like nommu Linux (but
obviously with a few limitations -- no dynamic plugins).
Rather than modify every location that uses dlfcn.h, I hooked the dlfcn.h
header with stub functions when shared library support is disabled. Then
symbol lookup is done via a local static lookup table (which is generated
automatically at build time) so that internal symbols can be found.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It uses 1MB as receive buf limit by default (without
increasing /proc/sys/net/core/rmem_max it will be limited by less
however) and allows to specify the size manually using "-rcvbuf X"
(-r is already used, so you need to specify at least -rc).
Additionally rtnl_listen() continues on ENOBUFS after printing the
error message.
Many thanks to Yevgeny Kosarzhevsky <yevg@pisem.net> for reporting
and a lot of testing
Thanks to Jan Engelhardt <jengelh@medozas.de> for a lot of advice
Thanks to Denys Fedoryschenko <denys@visp.net.lb> for some sample
code that he tried and thanks to Andreas Henriksson <andreas@fatal.se>
(who maintains iproute2 on debian) for the persistent followup.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Provides ability to edit queue_mapping field
Provides ability to edit priority field
usage: action skbedit [queue_mapping QUEUE_MAPPING] [priority PRIORITY]
at least one option must be select, or both at the same time
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
Introducing the function that does the ATM cell alignment, and
modifying tc_calc_rtable() to use this based upon a linklayer
parameter.
Modified from original to use constants from atm.h and
fix all the usages of rtable in same patch.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
commit 94e9cba778cb97d77d9146dc3bd38ff195bc2c8a
Author: Patrick McHardy <kaber@trash.net>
Date: Sat Feb 2 18:22:16 2008 +0100
[IPROUTE]: cls_flow: add vlan-tag support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
[IPROUTE]: Add flow classifier support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Some usages of rtnl_send could cause errors (ie flush requests)
others do a listen afterwards.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Use santized kernel header for veth.h and put in correct place
to prevent possible future problems with API.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This routine parses CLI attributes, describing generic link
parameters such as name, address, etc.
This is mostly copy-pasted from iplink_modify().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This patch includes support for the Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) per RFC4214.
The following diffs are specific to the iproute2-2.6.23
software distribution. This message includes the full and
patchable diff text; please use this version to apply patches.
Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
The problem was that length of allocation changed but caller not told.
Anyway, the patch fixes a problem resulting in a double free
that occurs when using batch files that contains a special combination
of broken up lines and comments as reported in:
http://bugs.debian.org/398912
Thanks to Michal Pokrywka <mpokrywka@hoga.pl> for testcase and information
on which conditions problem could be reproduced under.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Enable users of ip to specify the times for rtt, rttvar and rto_min
in human-friendly terms a la "tc" while maintaining backwards
compatability with the previous "raw" mechanism. Builds upon
David Miller's uncommited patch to set rto_min.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This is a resend of the iproute VLAN patch with the if_link.h changes
edited out since the headers are already synced.
[IPROUTE]: VLAN support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This patch applies on top of Patrick McHardy's RTNETLINK
patches to add nested compat attributes. This is needed to maintain
ABI for sch_{rr|prio} in the kernel with respect to tc. A new option,
namely multiqueue, was added to sch_prio and sch_rr. This will allow
a user to turn multiqueue support on for sch_prio or sch_rr at loadtime.
Also, tc qdisc ls will display whether or not multiqueue is enabled on
that qdisc. When in multiqueue mode, a user can specify a value of 0 for
bands, and the number of bands will be created to match the number of
queues on the device.
This patch is to support the new sch_rr (round-robin) qdisc being proposed
in NET for multiqueue network device support in the Linux network stack.
It uses q_prio.c as the template, since the qdiscs are nearly identical,
outside of the ->dequeue() routine.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This adds capability for iproute2 to send nested attributes to the
kernel, while maintaining backwards compatibility.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Update the included version of the genetlink.h header to the multicast
group API and make the generic netlink controller part show multicast
groups where applicable. Also fix two typos.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
In order to support these new flags add current
linux/if.h into the directory with the local copies.
This caused troubles with outdated redefinitions from net/if.h
so I've removed the dependency on it.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
cheers,
jamal
[GENERAL] nl_mgrp to crap if base multicast groups exceeded
The old scheme of bitmasks works only for the first 32 groups.
Above that the setsockopt scheme must be used.
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Update kernel headers to be versions from 2.6.20.y
Solve cross compile build problems with x_tables and netfilter.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[utils] make muticast group to bitmask conversion generic
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Stepehen,
Didnt hear back from you, please apply this one; needed for the next
patches.
cheers,
jamal
[GENL] Update generic netlink header
The header file needs to be uptodate with recent changes to allow
for forward compatibility
Signed-off-by: J Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Fix ip6tunnel.c to be fit with current ip command style.
Unlike other modules currently iptunnel (and ip6tunnel) is not
designed as protocol-independent because of unarranged structure
between IPv4 and IPv6.
Usage: ip -f inet6 tunnel { add | change | del | show } [ NAME ]
[ remote ADDR local ADDR ] [ dev PHYS_DEV ]
[ encaplimit ELIM ]
[ hoplimit HLIM ] [ tc TC ] [ fl FL ]
[ dscp inherit ]
Where: NAME := STRING
ADDR := IPV6_ADDRESS
ELIM := { none | 0..255 }(default=4)
HLIM := 0..255 (default=64)
TC := { 0x0..0xff | inherit }
FL := { 0x0..0xfffff | inherit }
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
[IPROUTE]: Add support for larger number of routing tables
Support support for 2^32 routing tables by using the new RTA_TABLE
attribute for specifying tables > 255 and intepreting it if it is
sent by the kernel.
When tables > 255 are used on a kernel not supporting it an error will
occur because of the unknown netlink attribute.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The controller is the only module using this at the moment.
Thomas has a sample user of genetlink that would fit here; bug him
for it.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
