This prints out the data from the given nested attribute
to the given FILE pointer, interpreting the firmware that
the kernel has for showing netlink policies.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is useful for iterating elements in a nested attribute,
if they're not parsed with a strict length limit or such.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
In kernel commit 8cb081746c03 ("netlink: make validation more configurable
for future strictness"), Linux started implicitly flagging nests with
NLA_F_NESTED, unless the nest is created with nla_nest_start_noflag().
The ETS code uses nla_nest_start() where possible, so it does not work with
the current iproute2 code. Have libnetlink catch up by admitting the flag
in the attribute.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
groups > 31 have to be joined using the setsockopt. Since the nexthop
group is 32, add a helper to allow 'ip monitor' to listen for nexthop
messages.
Signed-off-by: David Ahern <dsahern@gmail.com>
While iproute2 correctly uses ifinfomsg struct as the ancillary header
when requesting an FDB dump on old kernels, it sets the message type to
RTM_GETLINK. This results in wrong reply being returned.
Fix this by using RTM_GETNEIGH instead.
Before:
$ bridge fdb show brport dummy0
Not RTM_NEWNEIGH: 00000158 00000010 00000002
After:
$ bridge fdb show brport dummy0
2a:0b:41:1c:92:d3 vlan 1 master br0 permanent
2a:0b:41:1c:92:d3 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 05880354c2 ("bridge: fdb: Fix filtering with strict checking disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: LiLiang <liali@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add RTNL_HANDLE_F_STRICT_CHK flag and set in rth flags to let know
commands know if the kernel supports strict checking.
Extracted from patch from Ido to fix filtering with strict checking
enabled.
Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add filter function to rtnl_neighdump_req and a buffer to the
request for the filter functions to append attributes.
Signed-off-by: David Ahern <dsahern@gmail.com>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter function to rtnl_addrdump_req to set device index in the
address dump request if the user is filtering addresses by device. In
addition, add a new ipaddr_link_get to do a single RTM_GETLINK request
instead of a device dump yet still store the data in the linfo list.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
rntl_talk_extack and parse_rtattr_index not used in current code.
rtnl_dump_filter_l is only used in this file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This function retrieves a signed 32-bit integer from a netlink message
and returns it.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This allows signed 64-bit integers to be retrieved from a netlink
message.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_nsiddump_req for namespace id dumps using the proper rtgenmsg
as the header. Convert existing RTM_GETNSID dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neightbldump_req for neighbor table dumps using the proper ndtmsg
as the header. Convert existing RTM_GETNEIGHTBL dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neighdump_req for neighbor dumps using the proper ndmsg
as the header. Convert existing rtnl_wilddump_request for RTM_GETNEIGH
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_talk can only send a single message to kernel. Add a new function
rtnl_talk_iov that can send multiple messages to kernel.
rtnl_talk_iov takes struct iovec * and iovlen as arguments.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add support for extended ack error reporting via libmnl.
Add a new function rtnl_talk_extack that takes a callback as an input
arg. If a netlink response contains extack attributes, the callback is
is invoked with the the err string, offset in the message and a pointer
to the message returned by the kernel.
If iproute2 is built without libmnl, it will still work but
extended error reports from kernel will not be available.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ipaddr_list_flush_or_save generates a list of nlmsg's for links and
optionally for addresses. Move the code into ip_linkaddr_list and
export it along with the supporting infrastructure.
API to use this function is:
struct nlmsg_chain linfo = { NULL, NULL};
struct nlmsg_chain ainfo = { NULL, NULL};
ip_linkaddr_list(family, filter_req, &linfo, &ainfo);
... error checking and code looping over linfo/ainfo ...
free_nlmsg_chain(&linfo);
free_nlmsg_chain(&ainfo);
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow callers of the dump API to handle nlmsg errors (e.g., an
unsupported feature). Setting RTNL_HANDLE_F_SUPPRESS_NLERR in the
rtnl_handle avoids unnecessary messages to the users in some case.
For example,
RTNETLINK answers: Operation not supported
when probing for support of a new feature.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
iplink_vrf has 2 functions used to validate a user given device name is
a VRF device and to return the table id. If the user string is not a
device name ip commands with a vrf keyword show a confusing error
message: "RTNETLINK answers: No such device".
Add a variant of rtnl_talk that does not display the "RTNETLINK answers"
message and update iplink_vrf to use it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Kernel gained support for filtering link dumps with commit dc599f76c22b
("net: Add support for filtering link dump by master device and kind").
Add support to ip link command. If a user passes master device or
kind to ip link command they are added to the link dump request message.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This patch introduces two new api's rta_nest and rta_nest_end to
nest attributes inside a rta attribute represented by 'struct rtattr'
as required to construct a nexthop. Also adds rta_addattr* variants
for u8, u16 and u64 as needed to support encapsulation.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Benc <jbenc@redhat.com>
Add support for filtering neighbor dumps by master device. Kernel side
support provided by commit 21fdd092acc7. Since the feature is not
available in older kernels the user is given a warning message if the
kernel does not support the request.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
With this patch, it's now possible to listen in all netns that have an nsid
assigned into the netns where the socket is opened.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
