Since moving get_rate() and get_size() from tc to lib, on some
systems we fail to link because of missing math lib.
Move the functions that require math lib to their own c file
and add -lm to dcb that now use those functions.
../lib/libutil.a(utils.o): In function `get_rate':
utils.c:(.text+0x10dc): undefined reference to `floor'
../lib/libutil.a(utils.o): In function `get_size':
utils.c:(.text+0x1394): undefined reference to `floor'
../lib/libutil.a(json_print.o): In function `sprint_size':
json_print.c:(.text+0x14c0): undefined reference to `rint'
json_print.c:(.text+0x14f4): undefined reference to `rint'
json_print.c:(.text+0x157c): undefined reference to `rint'
Fixes: f3be0e6366 ("lib: Move get_rate(), get_rate64() from tc here")
Fixes: 44396bdfcc ("lib: Move get_size() from tc here")
Fixes: adbe5de966 ("lib: Move sprint_size() from tc here, add print_size()")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The Linux DCBX object is a 1-byte bitfield of flags that configure whether
the DCBX protocol is implemented in the device or in the host, and which
version of the protocol should be used. Add a tool to access the per-port
Linux DCBX object.
For example:
# dcb dcbx set dev eni1np1 host ieee
# dcb dcbx show dev eni1np1
host ieee
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
DCB APP interfaces are standardized in 802.1q-2018, and allow configuration
of traffic prioritization rules based on several possible headers.
Add a dcb subtool for maintenance and display of the APP table. For
example:
# dcb app add dev eni1np1 dscp-prio 0:0 CS3:3 CS6:6
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS6:6
# dcb app add dev eni1np1 dscp-prio CS3:4
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS3:4 CS6:6
# dcb app replace dev eni1np1 dscp-prio CS3:5
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:5 CS6:6
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Some DSCP values can be translated to symbolic names. That may not be
always desirable. Introduce a command-line option similar to other tools,
-N or --Numeric, to suppress this translation.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function dcb_get_attribute() assumes that the caller knows the exact
size of the looked-for payload. It also assumes that the response comes
wrapped in an DCB_ATTR_IEEE nest. The former assumption does not hold for
the IEEE APP table, which has variable size. The latter one does not hold
for DCBX, which is not IEEE-nested, and also for any CEE attributes, which
would come CEE-nested.
Factor out the payload extractor from the current dcb_get_attribute() code,
and put into a helper. Then rewrite dcb_get_attribute() compatibly in terms
of the new function. Introduce dcb_get_attribute_va() as a thin wrapper for
IEEE-nested access, and dcb_get_attribute_bare() for access to attributes
that are not nested.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function dcb_set_attribute() takes a fully-formed payload as an
argument. For callers that need to build a nested attribute, such as is the
case for DCB APP table, this is not great, because with libmnl, they would
need to construct a separate netlink message just to pluck out the payload
and hand it over to this function.
Currently, dcb_set_attribute() also always wraps the payload in an
DCB_ATTR_IEEE container, because that is what all the dcb subtools so far
needed. But that is not appropriate for DCBX in particular, and in fact a
handful other attributes, as well as any CEE payloads.
Instead, generalize this code by adding parameters for constructing a
custom payload and for fetching the response from a custom response
attribute. Then add dcb_set_attribute_va(), which takes a callback to
invoke in the right place for the nest to be built, and
dcb_set_attribute_bare(), which is similar to dcb_set_attribute(), but does
not encapsulate the payload in an IEEE container. Rewrite
dcb_set_attribute() compatibly in terms of the new functions.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This to keep compatible with the major tools, ip and tc. Also
document the option in the man page, which was neglected.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DCB socket buffer is allocated in dcb_init(), but never freed(). Free it
in dcb_fini().
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
dcb currently sends all netlink messages with a type RTM_GETDCB, even the
set ones. Change to the appropriate type.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DCBNL maxrate interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of rate with which traffic in a given traffic class is
sent.
Add a dcb subtool to allow showing and tweaking of this per-TC maximum
rate. For example:
# dcb maxrate show dev eni1np1
tc-maxrate 0:25Gbit 1:25Gbit 2:25Gbit 3:25Gbit 4:25Gbit 5:25Gbit 6:100Gbit 7:25Gbit
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
DCBNL buffer interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of port headroom buffers.
Add a dcb subtool to allow showing and tweaking of buffer priority mapping
and buffer sizes. For example:
# dcb buf show dev eni1np1
prio-buffer 0:0 1:0 2:0 3:3 4:0 5:0 6:6 7:0
buffer-size 0:10000 1:0 2:0 3:70000 4:0 5:0 6:10000 7:0
total-size 221072
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow switching "dcb" into the ISO/IEC mode of units by passing -i.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow selective display of statistical counters by passing -s.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The DCB buffer object has a settable array of 32-bit quantities, and the
maxrate object of 64-bit ones. Adjust dcb_parse_mapping() and related
helpers to support 64-bit values in mappings, and add appropriate helpers.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
None, one, or many parameters can be given on the command line, but
the current synopsis allows only none or one. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
"dcb ets show dev X help" currently shows full "ets" help instead of just
help for the show command. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
getopt_long() currently includes "c" and "n" in the short option string.
These probably slipped in as a cut'n'paste, and are not actually accepted.
Remove them.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Linux DCB interface allows configuration of a broad range of
hardware-specific attributes, such as TC scheduling, flow control, per-port
buffer configuration, TC rate, etc. Add a new tool to show that
configuration and tweak it.
DCB allows configuration of several objects, and possibly could expand to
pre-standard CEE interfaces. Therefore the tool itself is a lean shell that
dispatches to subtools each dedicated to one of the objects.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
