mirror of
https://git.proxmox.com/git/mirror_frr
synced 2025-10-31 19:42:14 +00:00
85 lines
2.2 KiB
Plaintext
85 lines
2.2 KiB
Plaintext
DEBUG HINTS
|
|
|
|
- Check the source is issuing multicast packets with TTL high enough
|
|
to reach the recipients.
|
|
|
|
- Check the multicast packets are not being dropped due to
|
|
fragmentation problems.
|
|
|
|
- Three easy options to test IGMPv3 joins from the receiver host:
|
|
|
|
1) Configure pimd on the receiver host with "ip igmp join":
|
|
|
|
interface eth0
|
|
ip pim ssm
|
|
ip igmp join 239.1.1.1 1.1.1.1
|
|
|
|
2) Use test_igmpv3_join command-line utility (provided with qpimd):
|
|
|
|
test_igmpv3_join eth0 239.1.1.1 1.1.1.1
|
|
|
|
3) User the Stig Venaas' ssmping utility:
|
|
|
|
ssmping -I eth0 1.1.1.1
|
|
|
|
To see multicast responses with ssmping, you will need run on
|
|
the host 1.1.1.1 either:
|
|
a) Stig Venaas' ssmpingd command-line daemon
|
|
OR
|
|
b) qpimd built-in ssmpingd service:
|
|
conf t
|
|
ip ssmpingd 1.1.1.1
|
|
|
|
- Using nepim to generate multicast stream from 1.1.1.1 to 239.1.1.1:
|
|
|
|
Notices:
|
|
|
|
a) The host unicast address 1.1.1.1 must be reachable from the
|
|
receiver.
|
|
|
|
b) nepim tool requires the receiver must be started *before* the
|
|
sender.
|
|
|
|
First: Start a receiver for that stream by running:
|
|
|
|
nepim -q -6 -j 1.1.1.1+239.1.1.1@eth0
|
|
(Remember of enabling both "ip pim ssm" and "ip igmp" under eth0.)
|
|
|
|
Second: Start the sender at host 1.1.1.1.
|
|
|
|
The following command generates a 100-kbps multicast stream for
|
|
channel 1.1.1.1,239.1.1.1 with TTL 10 and 1000-byte payload per UDP
|
|
packet (to avoid fragmentation):
|
|
|
|
nepim -6 -M -b 1.1.1.1 -c 239.1.1.1 -T 10 -W 1000 -r 100k -a 1d
|
|
|
|
|
|
|
|
SAMPLE DEBUG COMMANDS
|
|
|
|
conf t
|
|
int eth0
|
|
ip pim ssm
|
|
|
|
test pim receive hello eth0 192.168.0.2 600 10 111 1000 3000 0
|
|
test pim receive join eth0 600 192.168.0.1 192.168.0.2 239.1.1.1 1.1.1.1
|
|
|
|
show ip pim join
|
|
|
|
|
|
INTEROPERABILITY WITH CISCO
|
|
|
|
! Cisco IP Multicast command reference:
|
|
! ftp://ftpeng.cisco.com/ipmulticast/Multicast-Commands
|
|
!
|
|
ip pim ssm default ! enable SSM mode for groups 232.0.0.0/8
|
|
ip multicast-routing
|
|
ip pim state-refresh disable
|
|
no ip pim dm-fallback
|
|
!
|
|
interface FastEthernet0
|
|
ip pim sparse-mode
|
|
ip igmp version 3
|
|
|
|
-x-
|