mirror_frr/redhat

Building your own FRRouting RPM

(Tested on CentOS 6, CentOS 7 and Fedora 24.)

1. On CentOS 6 (which doesn't provide a bison/automake/autoconf of a recent enough version):

   • Check out ../doc/developer/building-frr-for-centos6.rst for details on installing a bison/automake/autoconf to support frr building.

   Newer automake/autoconf/bison is only needed to build the rpm and is not needed to install the binary rpm package

2. Install the build packages as documented in doc/developer/building-frr-for-xxxxx.rst and the following additional packages:

    yum install rpm-build net-snmp-devel pam-devel libcap-devel
   

   Additionally, on systems with systemd (CentOS 7, Fedora)

    yum install systemd-devel
   

   (use dnf install on new Fedora instead of yum install)

3. Checkout FRR under a unpriviledged user account

    git clone https://github.com/frrouting/frr.git frr
   

4. Run Bootstrap and make distribution tar.gz

    cd frr
    ./bootstrap.sh
    ./configure --with-pkg-extra-version=-MyRPMVersion \
        SPHINXBUILD=sphinx-build2.7
    make dist
   

   Note: configure parameters are not important for the RPM building - except the with-pkg-extra-version if you want to give the RPM a specific name to mark your own unoffical build

5. Create RPM directory structure and populate with sources

    mkdir rpmbuild
    mkdir rpmbuild/SOURCES
    mkdir rpmbuild/SPECS
    cp redhat/*.spec rpmbuild/SPECS/
    cp frr*.tar.gz rpmbuild/SOURCES/
   

6. Edit rpm/SPECS/frr.spec with configuration as needed Look at the beginning of the file and adjust the following parameters to enable or disable features as required:

    ############### FRRouting (FRR) configure options #################
    # with-feature options
    %{!?with_pam:           %global  with_pam           0 }
    %{!?with_ospfclient:    %global  with_ospfclient    1 }
    %{!?with_ospfapi:       %global  with_ospfapi       1 }
    %{!?with_irdp:          %global  with_irdp          1 }
    %{!?with_rtadv:         %global  with_rtadv         1 }
    %{!?with_ldpd:          %global  with_ldpd          1 }
    %{!?with_nhrpd:         %global  with_nhrpd         1 }
    %{!?with_eigrp:         %global  with_eigrpd        1 }
    %{!?with_shared:        %global  with_shared        1 }
    %{!?with_multipath:     %global  with_multipath     256 }
    %{!?frr_user:           %global  frr_user           frr }
    %{!?vty_group:          %global  vty_group          frrvty }
    %{!?with_fpm:           %global  with_fpm           0 }
    %{!?with_watchfrr:      %global  with_watchfrr      1 }
    %{!?with_bgp_vnc:       %global  with_bgp_vnc       0 }
    %{!?with_pimd:          %global  with_pimd          1 }
    %{!?with_rpki:          %global  with_rpki          0 }
   

7. Build the RPM

    rpmbuild --define "_topdir `pwd`/rpmbuild" -ba rpmbuild/SPECS/frr.spec
   

   If building with RPKI, then download and install the additional RPKI packages from https://ci1.netdef.org/browse/RPKI-RTRLIB/latestSuccessful/artifact

DONE.

If all works correctly, then you should end up with the RPMs under rpmbuild/RPMS and the Source RPM under rpmbuild/SRPMS

Enabling daemons after installation of the package:

init.d based systems (ie CentOS 6):

1. Edit /etc/frr/daemons and enable required routing daemons (Zebra is probably needed for most deployments, so make sure to enable it.)

2. Enable the daemons as needed to run after boot (Zebra is mandatory)

    chkconfig frr on
   

3. Check your firewall / IPtables to make sure the routing protocols are allowed.

4. Start the FRR daemons (or reboot)

    service frr start
   

Configuration is stored in /etc/frr/*.conf files and daemon selection is stored in /etc/frr/daemons.

systemd based systems (ie CentOS 7, Fedora 24)

1. Edit /etc/frr/daemons and enable required routing daemons (Zebra is probably needed for most deployments, so make sure to enable it.)

2. Enable the frr daemons to run after boot.

    systemctl enable frr
   

3. Check your firewall / IPtables to make sure the routing protocols are allowed.

4. Start the daemons (or reboot)

    systemctl start frr
   

Configuration is stored in /etc/frr/*.conf files and daemon selection is stored in /etc/frr/daemons.