When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the `parse_encap_seg6local` function to parse SRv6 flavors
information contained in the Netlink message.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Only attempt to install in netlink iprules that include supported
actions; ignore requests with actions that aren't supported by
netlink.
Signed-off-by: Mark Stapp <mjs@labn.net>
If the kernel sends us bad data then the kind_str
will be NULL and a later strcmp operation will
cause a crash.
As a note: If the kernel is not sending us properly
formated netlink messages then we got bigger problems
than zebra crashing. But at least let's prevent zebra
from crashing.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the txqlen attribute to the common interface struct. Capture
the value in zebra, and distribute it through the interface lib
module's zapi messaging.
Signed-off-by: Mark Stapp <mjs@labn.net>
During replace of a NHE from upper proto in zebra_nhg_proto_add(),
- rib_handle_nhg_replace() is invoked with old NHE where we walk all
RNs/REs & replace the re->nhe whose address points to old NHE.
- In this walk, if prev re->nhe refcnt is decremented to 0, we free up
the memory which the old NHE is pointing to.
Later in zebra_nhg_proto_add(), we end up accessing this freed memory
and crash.
Logs:
1380766 2023/08/16 22:34:11.994671 ZEBRA: [WDEB1-93HCZ] zebra_nhg_decrement_ref: nhe 0x56091d890840 (70312519[2756/2762/2810]) 2 => 1
1380773 2023/08/16 22:34:11.994678 ZEBRA: [WDEB1-93HCZ] zebra_nhg_decrement_ref: nhe 0x56091d890840 (70312519[2756/2762/2810]) 1 => 0
1380777 2023/08/16 22:34:11.994844 ZEBRA: [JE46R-G2NEE] zebra_nhg_release: nhe 0x56091d890840 (70312519[2756/2762/2810])
1380778 2023/08/16 22:34:11.994849 ZEBRA: [SCDBM-4H062] zebra_nhg_free: nhe 0x56091d890840 (70312519[2756/2762/2810]), refcnt 0
1380782 2023/08/16 22:34:11.995000 ZEBRA: [SCDBM-4H062] zebra_nhg_free: nhe 0x56091d890840 (0[]), refcnt 0
1380783 2023/08/16 22:34:11.995011 ZEBRA: lib/memory.c:84: mt_count_free(): assertion (mt->n_alloc) failed
Backtrace:
0 0x00007f833f5f48eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
1 0x00007f833f5df535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
2 0x00007f833f636648 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
3 0x00007f833f63cd6a in ?? () from /lib/x86_64-linux-gnu/libc.so.6
4 0x00007f833f63cfb4 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
5 0x00007f833f63fbc8 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
6 0x00007f833f64172a in malloc () from /lib/x86_64-linux-gnu/libc.so.6
7 0x00007f833f6c3fd2 in backtrace_symbols () from /lib/x86_64-linux-gnu/libc.so.6
8 0x00007f833f9013fc in zlog_backtrace_sigsafe (priority=priority@entry=2, program_counter=program_counter@entry=0x7f833f5f48eb <raise+267>) at lib/log.c:222
9 0x00007f833f901593 in zlog_signal (signo=signo@entry=6, action=action@entry=0x7f833f988ee8 "aborting...", siginfo_v=siginfo_v@entry=0x7ffee1ce4a30,
program_counter=program_counter@entry=0x7f833f5f48eb <raise+267>) at lib/log.c:154
10 0x00007f833f92dbd1 in core_handler (signo=6, siginfo=0x7ffee1ce4a30, context=<optimized out>) at lib/sigevent.c:254
11 <signal handler called>
12 0x00007f833f5f48eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
13 0x00007f833f5df535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
14 0x00007f833f958f96 in _zlog_assert_failed (xref=xref@entry=0x7f833f9e4080 <_xref.10705>, extra=extra@entry=0x0) at lib/zlog.c:680
15 0x00007f833f905400 in mt_count_free (mt=0x7f833fa02800 <MTYPE_NH_LABEL>, ptr=0x51) at lib/memory.c:84
16 mt_count_free (ptr=0x51, mt=0x7f833fa02800 <MTYPE_NH_LABEL>) at lib/memory.c:80
17 qfree (mt=0x7f833fa02800 <MTYPE_NH_LABEL>, ptr=0x51) at lib/memory.c:140
18 0x00007f833f90799c in nexthop_del_labels (nexthop=nexthop@entry=0x56091d776640) at lib/nexthop.c:563
19 0x00007f833f907b91 in nexthop_free (nexthop=0x56091d776640) at lib/nexthop.c:393
20 0x00007f833f907be8 in nexthops_free (nexthop=<optimized out>) at lib/nexthop.c:408
21 0x000056091c21aa76 in zebra_nhg_free_members (nhe=0x56091d890840) at zebra/zebra_nhg.c:1628
22 zebra_nhg_free (nhe=0x56091d890840) at zebra/zebra_nhg.c:1628
23 0x000056091c21bab2 in zebra_nhg_proto_add (id=<optimized out>, type=9, instance=<optimized out>, session=0, nhg=nhg@entry=0x56091d7da028, afi=afi@entry=AFI_UNSPEC)
at zebra/zebra_nhg.c:3532
24 0x000056091c22bc4e in process_subq_nhg (lnode=0x56091d88c540) at zebra/zebra_rib.c:2689
25 process_subq (qindex=META_QUEUE_NHG, subq=0x56091d24cea0) at zebra/zebra_rib.c:3290
26 meta_queue_process (dummy=<optimized out>, data=0x56091d24d4c0) at zebra/zebra_rib.c:3343
27 0x00007f833f9492c8 in work_queue_run (thread=0x7ffee1ce55a0) at lib/workqueue.c:285
28 0x00007f833f93f60d in thread_call (thread=thread@entry=0x7ffee1ce55a0) at lib/thread.c:2008
29 0x00007f833f8f9888 in frr_run (master=0x56091d068660) at lib/libfrr.c:1223
30 0x000056091c1b8366 in main (argc=12, argv=0x7ffee1ce5988) at zebra/main.c:551
Issue: 3492162
Ticket# 3492162
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
The code that handles the protodown_rc setting for
VRRP interfaces in zebra is sending a interface
to be set into a protodown state *before* the
interface has been learned by the kernel. Resulting
in crashes when the data plane sends the ctx back
to us saying hey man you are uncool.
Additionally change the protodown code to refuse
to send any protodown_rc codes *until* the interface
has actually been learned about from the kernel.
Ticket: 3582375
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upon some internal testing some crashes were found. This fixes
the several crashes and normalizes the code to be closer in
it's execution pre and post changes to use the data plane.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The zebra_rmap_obj was storing the re->metric and allowing
matches against it, but in most cases it was just using 0.
Use the Route entries metric instead. This should fix
some bugs where a match metric never worked.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In all cases the instance is derived from the re pointer
and since the re pointer is already stored, let's just
remove it from the game and cut to the chase.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace the source_protocol with just saving a pointer to the re
in the `struct zebra_rmap_obj` data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nexthop that is stored already knows it's nexthop and
in all cases the vrf id is derived from the nexthop->vrf_id
let's just cut to the chase and not do this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If an import table route-map is trying to match against
a particular interface, The code is matching against
the actual vrf the route entry is in -vs- the vrf
the nexthop entry is in. Let's modify the code
to actually allow the import table entry to match
against the nexthops vrf.
Not working:
ip import-table 91
ip import-table 93 route-map FOO
no service integrated-vtysh-config
!
debug zebra events
!
interface green
ip address 192.168.4.3/24
exit
!
route-map FOO permit 10
match interface green
exit
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 1d10h07m
T[91]>* 1.2.3.5/32 [15/0] via 192.168.119.1, enp13s0, 00:00:05
K>* 169.254.0.0/16 [0/1000] is directly connected, virbr0 linkdown, 1d16h34m
C>* 192.168.44.0/24 is directly connected, virbr1, 01:30:51
C>* 192.168.45.0/24 is directly connected, virbr2, 01:30:51
C>* 192.168.119.0/24 is directly connected, enp13s0, 1d16h34m
C>* 192.168.122.0/24 is directly connected, virbr0 linkdown, 01:30:51
eva# show ip route table 91
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 91:
K>* 1.2.3.5/32 [0/0] via 192.168.119.1, enp13s0, 00:00:15
eva# show ip route table 93
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 93:
K * 1.2.3.4/32 [0/0] via 192.168.4.5, green (vrf green), 00:03:05
Working:
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 00:03:09
T[93]>* 1.2.3.4/32 [15/0] via 192.168.4.5, green (vrf green), 00:02:21
T[91]>* 1.2.3.5/32 [15/0] via 192.168.119.1, enp13s0, 00:02:26
K>* 169.254.0.0/16 [0/1000] is directly connected, virbr0, 00:03:09
C>* 192.168.44.0/24 is directly connected, virbr1, 00:03:09
C>* 192.168.45.0/24 is directly connected, virbr2, 00:03:09
C>* 192.168.119.0/24 is directly connected, enp13s0, 00:03:09
C>* 192.168.122.0/24 is directly connected, virbr0, 00:03:09
eva# show ip route table 91
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 91:
K * 1.2.3.5/32 [0/0] via 192.168.119.1, enp13s0, 00:03:12
eva# show ip route table 93
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF default table 93:
K * 1.2.3.4/32 [0/0] via 192.168.4.5, green (vrf green), 00:03:14
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This structure is really the generic route map object for
handling routemaps in zebra. Let's name it appropriately.
Future commits will consolidate the data to using the
struct route_entry as part of this data instead of copying
bits and bobs of it. This will allow future work to
set/control the route_entry more directly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The yang NB API does not handle the mpls configuration
on its leaf.
Add an mpls leaf to stick to the mpls configuration.
- true or false to mean if config
- not defined, means no config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The 'no mpls' command wrongly assumes the user wants to disable
the mpls handling on the interface whereas this is just a config
knob that should mean 'I don't care with mpls'.
Fix this by adding a 'disable' option to the mpls command.
Fixes: 39ffa8e8e8 ("zebra: Add a `mpls enable` interface node command")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bug is reporoduced in case of switching interfaces betwean VRFs.
ospf6d is enabled and configured in each VRF.
'dest' can be removed from the route node in the time when the same
route node waiting processing in another sub-queue.
A route node must only be in one sub-queue at a time.
Details:
1. Config:
interface if0
ipv6 address 2001:db8:cafe:2::2/64
ipv6 nat inside
ipv6 ospf6 area 0.0.0.51
ipv6 ospf6 cost 10
vrf test2
exit
!
interface if1
ipv6 address 2001:db8:cafe:4::1/64
ipv6 nat outside
ipv6 ospf6 area 0.0.0.0
ipv6 ospf6 cost 10
vrf test2
exit
!
router ospf6
ospf6 router-id 2.2.2.2
exit
!
router ospf6 vrf test1
ospf6 router-id 2.2.2.2
exit
!
router ospf6 vrf test2
ospf6 router-id 2.2.2.2
exit
I just quickly switched interfaces between different VRFs (default/test1/test2).
2. Log messages:
Aug 02 16:51:56 ubuntu zebra[386985]: [MFYWV-KH3MC] process_subq_early_route_add: (0:?):2001:db8:cafe:2::/64: Inserting route rn 0x56267593de90, re 0x56267595ae40 (connected) existing 0x0, same_count 0
Aug 02 16:51:56 ubuntu zebra[386985]: [Q4T2G-E2SQF] process_subq_early_route_add: dumping RE entry 0x56267595ae40 for 2001:db8:cafe:2::/64 vrf default(0)
Aug 02 16:51:56 ubuntu zebra[386985]: [GCGMT-SQR82] rib_link: (0:?):2001:db8:cafe:2::/64: rn 0x56267593de90 adding dest
Aug 02 16:51:56 ubuntu zebra[386985]: [JF0K0-DVHWH] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: queued rn 0x56267593de90 into sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [QE6V0-J8BG5] rib_delnode: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595ae40, removing
Aug 02 16:51:56 ubuntu zebra[386985]: [KMPGN-JBRKW] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90 is already queued in sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [MFYWV-KH3MC] process_subq_early_route_add: (0:254):2001:db8:cafe:2::/64: Inserting route rn 0x56267593de90, re 0x56267595abf0 (ospf6) existing 0x0, same_count 1
Aug 02 16:51:56 ubuntu zebra[386985]: [Q4T2G-E2SQF] process_subq_early_route_add: dumping RE entry 0x56267595abf0 for 2001:db8:cafe:2::/64 vrf default(0)
Aug 02 16:51:56 ubuntu zebra[386985]: [KMPGN-JBRKW] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90 is already queued in sub-queue Connected Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [YEYFX-TDSC2] process_subq_early_route_add: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, removing unneeded re 0x56267595ae40
Aug 02 16:51:56 ubuntu zebra[386985]: [Y53JX-CBC5H] rib_unlink: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595ae40
Aug 02 16:51:56 ubuntu zebra[386985]: [QE6V0-J8BG5] rib_delnode: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595abf0, removing
Aug 02 16:51:56 ubuntu zebra[386985]: [JF0K0-DVHWH] rib_meta_queue_add: (0:254):2001:db8:cafe:2::/64: queued rn 0x56267593de90 into sub-queue RIP/OSPF/ISIS/EIGRP/NHRP Routes
Aug 02 16:51:56 ubuntu zebra[386985]: [NZNZ4-7P54Y] default(0:254):2001:db8:cafe:2::/64: Processing rn 0x56267593de90
Aug 02 16:51:56 ubuntu zebra[386985]: [ZJVZ4-XEGPF] default(0:254):2001:db8:cafe:2::/64: Examine re 0x56267595abf0 (ospf6) status: Removed Changed flags: None dist 110 metric 10
Aug 02 16:51:56 ubuntu zebra[386985]: [NM15X-X83N9] rib_process: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, removing re 0x56267595abf0
Aug 02 16:51:56 ubuntu zebra[386985]: [Y53JX-CBC5H] rib_unlink: (0:254):2001:db8:cafe:2::/64: rn 0x56267593de90, re 0x56267595abf0
Aug 02 16:51:56 ubuntu zebra[386985]: [KT8QQ-45WQ0] rib_gc_dest: (0:?):2001:db8:cafe:2::/64: removing dest from table
Aug 02 16:51:56 ubuntu zebra[386985]: [HH6N2-PDCJS] default(0:0):2001:db8:cafe:2::/64 rn 0x56267593de90 dequeued from sub-queue Connected Routes
3. ...and then assert:
(gdb) bt
#0 __pthread_kill_implementation (no_tid=0, signo=6, threadid=140662163115136) at ./nptl/pthread_kill.c:44
#1 __pthread_kill_internal (signo=6, threadid=140662163115136) at ./nptl/pthread_kill.c:78
#2 __GI___pthread_kill (threadid=140662163115136, signo=signo@entry=6) at ./nptl/pthread_kill.c:89
#3 0x00007fee76753476 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
#4 0x00007fee767397f3 in __GI_abort () at ./stdlib/abort.c:79
#5 0x00007fee76a420fd in _zlog_assert_failed () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#6 0x0000562674efe0f0 in process_subq_route (qindex=7 '\a', lnode=0x562675940c60) at zebra/zebra_rib.c:2540
#7 process_subq (qindex=META_QUEUE_NOTBGP, subq=0x562675574580) at zebra/zebra_rib.c:3055
#8 meta_queue_process (dummy=<optimized out>, data=0x56267556d430) at zebra/zebra_rib.c:3091
#9 0x00007fee76a386e8 in work_queue_run () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#10 0x00007fee76a31c91 in thread_call () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#11 0x00007fee769ee528 in frr_run () from target:/usr/lib/x86_64-linux-gnu/frr/libfrr.so.0
#12 0x0000562674e97ec5 in main (argc=5, argv=0x7ffd1e275958) at zebra/main.c:478
(gdb) print lnode->data
$10 = (void *) 0x56267593de90
(gdb) p/x *(struct route_node *)0x56267593de90
$11 = {
p = {
family = 0xa,
prefixlen = 0x40,
u = {
prefix = 0x20,
prefix4 = {
s_addr = 0xb80d0120
},
prefix6 = {
__in6_u = {
__u6_addr8 = {0x20, 0x1, 0xd, 0xb8, 0xca, 0xfe, 0x0, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
__u6_addr16 = {0x120, 0xb80d, 0xfeca, 0x200, 0x0, 0x0, 0x0, 0x0},
__u6_addr32 = {0xb80d0120, 0x200feca, 0x0, 0x0}
}
},
...
table = 0x5626755ae010,
parent = 0x5626755ae070,
link = {0x0, 0x0},
lock = 0x4,
nodehash = {
hi = {
next = 0x5626755ae0d0,
hashval = 0xebe8bdbf
}
},
info = 0x0
3. What's happen:
We removed unneeded re 0x56267595ae40 while adding re 0x56267595abf0. It was the last connected re,
but rn 0x56267593de90 is still in the connected sub-queue.
Then rib_delnode was called for 0x56267595abf0. (rn 0x56267593de90 is still in the connected sub-queue).
rib_delnode have called rib_meta_queue_add which have checked, that rn is absent in sub-queue RIP/OSPF/ISIS/EIGRP/NHRP
and have added rn in the second sub-queue.
Fixes: d7ac4c4d88 ("zebra: Introduce early route processing on the MetaQ")
Signed-off-by: Pavel Ivashchenko <pivashchenko@nfware.com>
Before now, PBRD used non-zero values to imply that a rule's
match or action field was active. This approach was getting
cumbersome for fields where 0 is a valid active value and
various field-specific magic values had to be used.
This commit changes PBRD to use a flag bit per field to
indicate that the field is active.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
DSCP and ECN matching are configured independently. Maintain
these values in independent fields in pbrd, zapi, and zebra.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
After Zebra knows it's capability surrounding v6 with v4 nexthops
have it send this ability up to interested parties.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When zebra send msg to fpm client, it doesn't handle duplicated nexthops especially, which means if zebra has a route with NUM1 recursive nexthops, each resolved to the same NUM2 connected nexthops, it will send to fpm client a route with NUM1*NUM2 nexthops. But actually there are only NUM2 useful nexthops, the left NUM1*NUM2-NUM2 nexthops are all duplicated nexthops. By the way, zebra has duplicated nexthop remove logic when sending msg to kernel.
Add duplicated nexthop remove logic to zebra when sending msg to fpm client.
Signed-off-by: 恭简 <gongjian.lhr@alibaba-inc.com>
