The command of "show ip ospf" is incomplete. But "show ipv6 ospf" is fine.
Just complete it with actual parameters.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
The existing EVPN documentation in bgp.rst does not provide a holistic
configuration, just examples of individual features, and doesn't give
an operator any idea of what a compatible Linux netdev configuration
might look like. This introduces evpn.rst which includes a sample
frr.conf and corresponding Linux interface config (via iproute2) that
an operator can use to setup a basic EVPN topology and model their
interface manager's config from.
This initial version of evpn.rst shows Linux netdev config for
traditional bridges (vlan_filtering=0) and traditional vxlan devices
(single VNI). Later changes to this file will cover the use of
VLAN-aware bridges (vlan_filtering=1), single VXLAN devices
(multi VNI), and eventually bonds (for EVPN-MH).
Eventually the plan is to move the existing EVPN content from bgp.rst
into evpn.rst, but for now let's get some user-facing documentation in
place for interface configs.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Documentation ways that community-list works as OR when multiple community
values specified per entry, but it's wrong. It must be AND, let's fix this.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add "show motd" commad.
The vtysh user can call the "show motd" command to re-show the welcome message.
This is necessary if the user saves frequently used commands in motd.
Signed-off-by: Sergei Rozhkov <gh@zserg.ru>
The `sid vpn per-vrf export` VTY command in bgpd has been extended to
support up to 1048575 SIDs.
This commit updates the documentation of the `sid vpn per-vrf export`
command.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
We already have a global knob for graceful-shutdown, but it's handy having
per neighbor knob as well.
Especially when a single neighbor needs to be restarted/shutdown gracefuly.
We can do this route-maps, but this is a faster/cleaner way doing the same
for an operator.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a new cli command to troubleshoort pathd daemon.
Some traces initially enabled are hidden behind this
cli command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the documentation for the `behavior usid` command to zebra.
When the `behavior usid` command is set, a flag is added to the locator
to indicate that the locator is a uSID locator. When a locator is
specified as a uSID locator, the bgpd will install SRv6 behaviors with
the uSID in the dataplane and use the SRv6 uSID codepoints in the BGP
update message.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Some results:
```
====
PCRE
====
% ./a.out "^65001" "65001"
comparing: ^65001 / 65001
ret status: 0
[14:31] donatas-pc donatas /home/donatas
% ./a.out "^65001_" "65001"
comparing: ^65001_ / 65001
ret status: 0
=====
PCRE2
=====
% ./a.out "^65001" "65001"
comparing: ^65001 / 65001
ret status: 0
[14:30] donatas-pc donatas /home/donatas
% ./a.out "^65001_" "65001"
comparing: ^65001_ / 65001
ret status: 1
```
Seems that if using PCRE2, we need to escape outer `()` chars and `|`. Sounds
like a bug.
But this is only with some older PCRE2 versions. With >= 10.36, I wasn't able
to reproduce this, everything is fine and working as expected.
Adding _FRR_PCRE2_POSIX definition because pcre2posix.h does not have
include's guard.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Remove the nexthop groups documentation from pbr.rst and
make it `generic`. Add the resilient buckets nexthop
group type.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
"on-shutdown" and "on-startup" have the different timeout range.
Correct the timeout range for "on-shutdown" based on the current code:
```
(ospf) max-metric router-lsa on-shutdown (5-100)
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Add a default limit to the InQ for messages off the bgp peer
socket. Make the limit configurable via cli.
Adding in this limit causes the messages to be retained in the tcp
socket and allow for tcp back pressure and congestion control to kick
in.
Before this change, we allow the InQ to grow indefinitely just taking
messages off the socket and adding them to the fifo queue, never letting
the kernel know we need to slow down. We were seeing under high loads of
messages and large perf-heavy routemaps (regex matching) this queue
would cause a memory spike and BGP would get OOM killed. Modifying this
leaves the messages in the socket and distributes that load where it
should be in the socket buffers on both send/recv while we handle the
mesages.
Also, changes were made to allow the ringbuffer to hold messages and
continue to be filled by the IO pthread while we wait for the Main
pthread to handle the work on the InQ.
Memory spike seen with large numbers of routes flapping and route-maps
with dozens of regex matching:
```
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: > 2GB
Holding block headers: 516 KiB
Used small blocks: 0 bytes
Used ordinary blocks: 160 MiB
Free small blocks: 3680 bytes
Free ordinary blocks: > 2GB
Ordinary blocks: 121244
Small blocks: 83
Holding blocks: 1
```
With most of it being held by the inQ (seen from the stream datastructure info here):
```
Type : Current# Size Total Max# MaxBytes
...
...
Stream : 115543 variable 26963208 15970740 3571708768
```
With this change that memory is capped and load is left in the sockets:
RECV Side:
```
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 265350 0 [fe80::4080:30ff:feb0:cee3]%veth1:36950 [fe80::4c14:9cff:fe1d:5bfd]:179 users:(("bgpd",pid=1393334,fd=26))
skmem:(r403688,rb425984,t0,tb425984,f1816,w0,o0,bl0,d61)
```
SEND Side:
```
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 0 1275012 [fe80::4c14:9cff:fe1d:5bfd]%veth1:179 [fe80::4080:30ff:feb0:cee3]:36950 users:(("bgpd",pid=1393443,fd=27))
skmem:(r0,rb131072,t0,tb1453568,f1916,w1300612,o0,bl0,d0)
```
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This command adds the documentation for the "sid vpn per-vrf export (1..255)|auto" command to bgpd.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
This commit adds the documentation of the two optional parameters "block-len" and "node-len" of the SRv6 locator.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
