Handle Remote Neigh entry state change from Router to Host.
Remote MAC-IP update may not continue EVPN NA Extended community,
Zebra need to accomodate if router_flag change for existing neigh
and install with or without Router Flag (R-bit).
Testing:
Have locally run MAC/IP (neigh entry) with R-bit set,
Checke on remote VTEP 'show bgp evpn route ...mac ip' and
'show evpn arp-cache ...' contians router flag.
Change host to remove R-bit, which locally learnt entry removes
Router flag. This results in remote vtep to remove R-bit from
neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Neigh update can have router_flag change, from unset to set and
viceversa. This is the case where MAC, IP and VLAN are same but
entry's flag moved from R to not R bit and reverse case.
Router flag change needs to trigger bgpd to inform all evpn peers
to remove from the evpn route.
Testing Done:
Send GARP with and without R bit from host and validate neigh entry
and evpn neigh and mac-ip route entry in zebra and bgpd.
Check Peer VTEP evpn route entry where router flag is (un)set.
With R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8 ND:Router
Flag
AddPath ID: RX 0, TX 1261
Last update: Wed Aug 15 20:52:14 2018
Without R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP2(uplink-2) (27.0.0.10)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8
AddPath ID: RX 0, TX 1263
Last update: Wed Aug 15 20:53:10 2018
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The neigh update can come prior to mac add update.
In this case, the mac will be auto created for the vni.
set router flag to local neigh update for mac with auto flag.
The neigh update will be informed to bgpd once local mac is learnt.
Unset router flag if the neigh update comes without the router flag
for an existing neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
* Added code for "match ipv6 address prefix list" command
* Added common function route_match_address_prefix_list() to process
routemap for AFI_IP and AFI_IP6 address family
Signed-off-by: kssoman <somanks@vmware.com>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
In order for connected routes to be installed the if_is_operative
function is called. This function checks the status of ptm
and decides to use ptm enabled/disabled on the interface.
The call to zebra_ptm_get_enable was returning true and causing
the interface subsystem to do the wrong thing. Modify the
internal bfd case to when checking for ptm enabled to say it
is not enabled.
Tested-by: Mark Stapp <mjs@voltanet.io>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The CMSG_FIRSTHDR was broken on solaris pre version 9. Version 9
was released in May of 2002 and EOL'ed in 2014. Version 8 EOL'ed
in 2012. Remove special case code for a little used platform
that has not seen the light of day in a very long time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We must hide only "pseudowire IFNAME" from vtysh, the "no" form of the
command should be made available to the extract.pl script. Split the
command into two to fix this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On `zebra` / `bfdd` shutdown we now clean up all client data to avoid
memory leaks (ghost clients). This also prevents 'slow' shutdown on
`zebra` sparing us from seeing some rare topotests shutdown failures
(signal handler getting stopped by signal).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This will make `bfdd` synchronize with its client when zebra dies or
bfdd is restarted.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When `bfdd` is enabled - which it is by default - re-route the PTM-BFD
messages to the FRR's internal BFD daemon instead of the external
PTM daemon.
This will help the migration of BFD implementations and avoid
duplicating code.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The client socket value can only be modified by the main thread.
Modifying the client socket from within the client I/O pthread
introduces race conditions.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Socket should be closed in zserv_client_free() and nowhere else.
Credit to Mark Stapp for catching this one.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rename some things to be less confusing
* Convert client close function to take a client struct rather than a
task
* Extern client close function and use it when handling SIGTERM
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of moving the static route handling to it's own daemon
allow zebra to accept static route types from upper level
protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
