Just adding a support for peer-groups, because now it's not possible to
configure BGP role for peer-groups.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The default keepalive/hold timers are always exposed via this commit:
```
commit 9b1b96233d (origin/bgp_timer_always_on)
Author: Trey Aspelund <taspelund@nvidia.com>
Date: Mon Jun 27 23:20:33 2022 +0000
bgpd: always display keepalive/hold intervals
`show bgp neighbors <peer> [json]` was only displaying the configured
keepalive and holdtime intervals when they differed from the default
values. Since default config is still config, let's make sure these
values are always displayed.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
```
However it mistakenly changed the logic to only display the peer's
timers if the configured value was non-zero. This updates the logic to
check PEER_FLAG_TIMER to determine if the values were configured,
given 0 is a valid value (to disable keepalives).
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
`show bgp neighbors <peer> [json]` was only displaying the configured
keepalive and holdtime intervals when they differed from the default
values. Since default config is still config, let's make sure these
values are always displayed.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The command `debug bgp allow-martian` is not actually
a debug command it's a command that when entered allows
bgp to not reset a peering when a martian nexthop is
passed in the nlri.
Add the `bgp allow-martian-nexthop` command and allow it to be
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a peer has not established connection yet, these values:
`hostLocal`, `portLocal`, `hostForeign`, `portForeign` might
not have any values and json output will not display anything
for them. Modify the code to display some nominal values in
this situation so that parsers are not surprised.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Also, warn in CLI an operator if we are trying to overwrite an existing
community alias with an existing alias.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before:
```
root@spine1-debian-11:~/frr# vtysh -c 'show memory bgpd | include Large Community'
Large Community : 100 40 4000 100 4000
Large Community value : 100 12 2400 100 2400
root@spine1-debian-11:~/frr# for x in $(seq 1 100); do vtysh -c 'conf' -c 'bgp community alias 123:123:123 testas' > /dev/null; done
root@spine1-debian-11:~/frr# vtysh -c 'show memory bgpd | include Large Community'
Large Community : 200 40 8000 200 8000
Large Community value : 200 12 4800 200 4800
root@spine1-debian-11:~/frr# for x in $(seq 1 100); do vtysh -c 'conf' -c 'bgp community alias 123:123:123 testas' > /dev/null; done
root@spine1-debian-11:~/frr# vtysh -c 'show memory bgpd | include Large Community'
Large Community : 300 40 12000 300 12000
Large Community value : 300 12 7200 300 7200
root@spine1-debian-11:~/frr#
```
After:
```
root@spine1-debian-11:~/frr# vtysh -c 'show memory bgpd | include Large Community'
Large Community : 0 40 0 1 56
Large Community display string: 0 8192 0 1 8200
Large Community value : 0 12 0 1 24
root@spine1-debian-11:~/frr# for x in $(seq 1 100); do vtysh -c 'conf' -c 'bgp community alias 123:123:123 testas' > /dev/null; done
root@spine1-debian-11:~/frr# vtysh -c 'show memory bgpd | include Large Community'
Large Community : 0 40 0 1 56
Large Community display string: 0 8192 0 1 8200
Large Community value : 0 12 0 1 24
root@spine1-debian-11:~/frr#
```
After we call [l]community_str2com(), we should free the memory.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Allow BGP to control the TOS DSCP value in the tcp header
via a new command at the bgp global level `bgp session-dscp <0-63>`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Pavel Shirhov <pavelsh@microsoft.com>
The maxpaths same_clusterlen value was a uint16_t
with a single bit being used. No other values are
being stored. Let's remove the bitfield and simplify
to a bool.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
N-bit flag should be exchanged in BGP OPEN messages, not only when the
bgpd is restarted/started.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Do not interface based peers change anything about when a
[no] neighbor <interface> capability extended-nexthop
is entered.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR is displaying that the peer enhanced capability command is not
turned on when the interface is part of a peer group. Saving the
config and then reloading actually turns it off.
Fix the code so that FRR does not display the enhanced capability
for interface based peers.
Fixes: #11108
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
```
spine1-debian-11# sh ip bgp neighbors 192.168.0.1
BGP neighbor is 192.168.0.1, remote AS 65001, local AS 65000, external link
Hostname: exit1-debian-11
BGP version 4, remote router ID 192.168.10.123, local router ID 192.168.100.1
BGP state = Established, up for 00:00:32
Last read 00:00:30, Last write 00:00:30
Hold time is 180, keepalive interval is 60 seconds
Configured conditional advertisements interval is 5 seconds
Time until conditional advertisements begin is 4 seconds
```
```
"bgpTimerConfiguredConditionalAdvertisementsSec":5,
"bgpTimerUntilConditionalAdvertisementsSec":1,
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before:
```
spine1-debian-11(config-route-map)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
% Malformed communities attribute
```
After:
```
spine1-debian-11(config)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
spine1-debian-11(config-route-map)#
```
Same for large-communities.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Since additional information such as block_bits_length is needed to
generate SIDs properly, the type of elements in srv6_locator_chunks
list is extended from "struct prefix_ipv6 *" to
"struct srv6_locator_chunk *". Even in terms of variable name,
"struct srv6_locator_chunk *" is appropriate.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Delay BGP configuration until we receive end-configuration hook to make sure
we don't send partial updates to peer which leads to broken Graceful-Restart.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Conversion of bgp error codes returned for cli input into
an enum and then properly handling all the error cases
in bgp_vty_return.
Because not all error codes returned were properly handled
in this function there existed configuration examples that
were accepted on the cli without an error message but not
saved.
Fixes: #10589
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP_ERR_PEER_GROUP_MEMBER and BGP_ERR_PEER_GROUP_PEER_TYPE_DIFFERENT
both are not handled by bgp_vty_return, but both can be handled by
this function as that there is nothing special going on here.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
