When a remote MAC goes away, but there are neighbors referring to it,
ensure that when the last remote neighbor goes away, the MAC is
uninstalled from the kernel and no longer considered as remote.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22130
Reviewed By: CCR-7777
Testing Done:
1. Replicated failed scenario and verified with fix.
2. evpn-min
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
The RB-Tree used to store rmac information was not properly
handling the v6 address family. Modify the code to allow
this handling.
Cleans up this error message:
zebra[2231]: host_rb_entry_compare: Unexpected family type: 10
That is being seen, This fixes some connectivity issues being seen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a header to cleanup no declaration and properly
wrapper some variables to appropriate #ifdef.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handle Remote Neigh entry state change from Router to Host.
Remote MAC-IP update may not continue EVPN NA Extended community,
Zebra need to accomodate if router_flag change for existing neigh
and install with or without Router Flag (R-bit).
Testing:
Have locally run MAC/IP (neigh entry) with R-bit set,
Checke on remote VTEP 'show bgp evpn route ...mac ip' and
'show evpn arp-cache ...' contians router flag.
Change host to remove R-bit, which locally learnt entry removes
Router flag. This results in remote vtep to remove R-bit from
neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Neigh update can have router_flag change, from unset to set and
viceversa. This is the case where MAC, IP and VLAN are same but
entry's flag moved from R to not R bit and reverse case.
Router flag change needs to trigger bgpd to inform all evpn peers
to remove from the evpn route.
Testing Done:
Send GARP with and without R bit from host and validate neigh entry
and evpn neigh and mac-ip route entry in zebra and bgpd.
Check Peer VTEP evpn route entry where router flag is (un)set.
With R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8 ND:Router
Flag
AddPath ID: RX 0, TX 1261
Last update: Wed Aug 15 20:52:14 2018
Without R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP2(uplink-2) (27.0.0.10)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8
AddPath ID: RX 0, TX 1263
Last update: Wed Aug 15 20:53:10 2018
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The neigh update can come prior to mac add update.
In this case, the mac will be auto created for the vni.
set router flag to local neigh update for mac with auto flag.
The neigh update will be informed to bgpd once local mac is learnt.
Unset router flag if the neigh update comes without the router flag
for an existing neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Enhance the EVPN MAC and Neighbor cache display to show additional
information such as the mobility sequence numbers and the state.
Ensure that the neighbor state is set in a couple of places so
that the display is correct.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement procedures similar to what is specified in
https://tools.ietf.org/html/draft-malhotra-bess-evpn-irb-extended-mobility
in order to support extended mobility scenarios in EVPN. These are scenarios
where a host/VM move results in a different (MAC,IP) binding from earlier.
For example, a host with an address assignment (IP1, MAC1) moves behind a
different PE (VTEP) and has an address assignment of (IP1, MAC2) or a host
with an address assignment (IP5, MAC5) has a different assignment of (IP6,
MAC5) after the move. Note that while these are described as "move" scenarios,
they also cover the situation when a VM is shut down and a new VM is spun up
at a different location that reuses the IP address or MAC address of the
earlier instance, but not both. Yet another scenario is a MAC change for an
attached host/VM i.e., when the MAC of an attached host changes from MAC1 to
MAC2. This is necessary because there may already be a non-zero sequence
number associated with MAC2. Also, even though (IP, MAC1) is withdrawn before
(IP, MAC2) is advertised, they may propagate through the network differently.
The procedures continue to rely on the MAC mobility extended community
specified in RFC 7432 and already supported by the implementation, but
augment it with a inheritance mechanism that understands the relationship
of the host MACIP (ARP/neighbor table entry) to the underlying MAC (MAC
forwarding database entry). In FRR, this relationship is understood by the
zebra component which doubles as the "host mobility manager", so the MAC
mobility sequence numbers are determined through interaction between bgpd
and zebra.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a host moves and is locally reachable, if the local neighbor event
is received before the local MAC event, flag the neighbor as inactive
just as would happen in the case of a new host. This ensures that the
MACIP route will get originated as soon as the local MAC event is got.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
show evpn mac vni all
show evpn mac vni x
does not display local svi and anycast mac into count.
Ticket:CM-20456
Testing Done:
Before:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 4
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
dell-s6000-07#
After:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 6
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
EVPN ND ext community support NA flag R-bit, to have proxy ND.
Set R-bit in EVPN NA if a given router is default gateway or there is a
local
router attached, which can be determine based on local neighbor entry.
Implement BGP ext community attribute to generate and parse R-bit and
pass along zebra to program neigh entry in kernel.
Upon receiving MAC/IP update with community type 0x06 and sub_type 0x08,
pass the R-bit to zebra to program neigh entry.
Set NTF_ROUTER in neigh entry and inform kernel to do proxy NA for EVPN.
Ref:
https://tools.ietf.org/html/draft-ietf-bess-evpn-na-flags-01
Ticket:CM-21712, CM-21711
Reviewed By:
Testing Done:
Configure Local vni enabled L3 Gateway, which would act as router,
checked
show evpn arp-cache vni x ip <ip of svi> on originated and remote VTEPs.
"Router" flag is set.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
SVI interface ip/hw address is advertised by the GW VTEP (say TORC11) with
the default-GW community. And the rxing VTEP (say TORC21) installs the GW
MAC as a dynamic FDB entry. The problem with this is a rogue packet from a
server with the GW MAC as source can cause a station move resulting in
TORC21 hijacking the GW MAC address and blackholing all inter rack traffic.
Fix is to make the GW MAC "sticky" pinning it to the GW VTEP (TORC11). This
commit does it by installing the FDB entry as static if the MACIP route is
received with the default-GW community (mimics handling of
mac-mobility-with-sticky community)
Sample output with from TORC12 with TORC11 setup as gateway -
root@TORC21:~# net show evpn mac vni 1004 mac 00:00:5e:00:01:01
MAC: 00:00:5e:00:01:01
Remote VTEP: 36.0.0.11 Remote-gateway Mac
Neighbors:
45.0.4.1
fe80::200:5eff:fe00:101
2001:fee1:0:4::1
root@TORC21:~# bridge fdb show |grep 00:00:5e:00:01:01|grep 1004
00:00:5e:00:01:01 dev vx-1004 vlan 1004 master bridge static
00:00:5e:00:01:01 dev vx-1004 dst 36.0.0.11 self static
root@TORC21:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ticket: CM-21508
New version of clang are detecting function parameters that we should
not be casting as such. Fix these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we have a host prefix, actually free the alloced memory
associated with it when we free it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Add centralized thread scheduling dispatchers for client threads and
the main thread
* Rename everything in zserv.c to stop using a combination of:
- zebra_server_*
- zebra_*
- zserv_*
Everything in zserv.c now begins with zserv_*.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The neighbor host_list is expensive as well. Modify
the code to take advantage of a rb_tree as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are going to modify more host_list's to host_rb's
so let's rename some functions to take advantage of
what is there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The host_list when we attempt to use it at scale, ends
up spending a non-trivial amount of time finding and
sorting entries for the host list. Convert to a rb tree.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a command to enable symmetric routing only for type-5 routes.
This command is provided under vrf <> option in zebra as follows:
vrf <VRF>
vni <VNI> [prefix-routes-only]
We need the corresponding no version of the command as well as follows:
vrf <VRF>
no vni <VNI> [prefix-routes-only]
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
EVPN owns the remote neigh entries which are programed in the kernel.
This entries should not age out and the only way to delete should be
from EVPN. We should program these entries with NUD_NOARP instead of
NUD_REACHABLE to avoid aging of this macs.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
