When advertising an mpls vpn entry with a new label,
the return traffic is redirected to the local machine,
but the MPLS traffic is dropped.
Add an MPLS entry to handle MPLS packets which have
the new label value. Traffic is swapped to the original
label value from the mpls vpn next-hop entry; then it is
sent to the resolved next-hop of the original next-hop
from the mpls vpn next-hop entry.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The advertised label value from mpls vpn routes is not modified
when the advertised next-hop is modified to next-hop-self.
Actually, the original label value received is redistributed as
is, whereas the new_label value bound in the nexthop label
bind entry should be used.
Only the VPN entries that contain MPLS information, and that
are redistributed between distinct peers, will have a label
value to advertise.
- no SRv6 attribute
- no local prefix
- no exported VPN prefixes from a VRF
If the advertisement to a given peer has the next-hop modified,
then the new label value will be picked up. The considered cases
are peers configured with 'next-hop-self' option, or ebgp peerings
without the 'next-hop-unchanged' option.
Note that the the NLRI format will follow the rfc3107 format, as
multiple label values for MPLS VPN NLRIs are not supported (the
rfc8277 is not supported).
Note also that the case where an outgoing route-map is applied to
the outgoing neighbor is not considered in this commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Current implementation does not offer a new label to bind
to a received VPN route entry to redistribute with that new
label.
This commit allocates a label for VPN entries that have
a valid label, and a reachable next-hop interface that is
configured as follows:
> interface eth0
> mpls bgp l3vpn-multi-domain-switching
> exit
An mplsvpn next-hop label binding entry is created in an mpls
vpn nexthop label bind hash table of the current BGP instance.
That mpls vpn next-hop label entry is indexed by the (next-hop,
orig_label) values provided by the incoming updates, and shared
with other updates having the same (next-hop, orig_label) values.
A new 'LP_TYPE_BGP_L3VPN_BIND' label value is picked up from the
zebra mpls label pool, and assigned to the new_label attribute.
The 'bgp_path_info' appends a 'bgp_mplsvpn_nh_label_bind' structure
to the 'mplsvpn' union structure. Both structures in the union are not
used at the same, as the paths are either VRF updates to export, or MPLS
VPN updates. Using an union gives a 24 bytes memory gain compared to if
the structures had not been in an union (24 bytes compared to 48 bytes).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The label allocation mechanism is called implicitly for
labeled unicast paths. The check should be explicit, because
the current patch set will extend the mechanism for mpls vpn
paths, and the code should explicitly tell which safi calls
which code.
Fix this implicit call by checking the safi value. Move the
code to a specific function.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The label per nexthop attributes take 24 bytes per bgp path
entry on AMD64 platform, and are only used for unicast paths.
The current patch-set introduces a similar attributes, but that
will be used only for l3vpn paths. To gain some memory on the
bgp_path_info structure in the next commit, do some changes.
Create an 'mplsvpn' union structure that will either include the
label per nexthop structs for ipv4 paths, or the l3vpn paths
structures. The 'label_nexthop_cache' and the 'label_nh_thread'
attributes of the 'bgp_path_info' structure are moved into an
union under a new structure called 'bgp_mplsvpn_label_nh_blnc'.
The flags attribute of 'bgp_path_info' is increased from 16 bits
to 32 bits, and the BGP_PATH_MPLSVPN_LABEL_NH flag is added to
know the 'mplsvpn' usage.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In the context of the ASBR facing an EBGP neighbor, or
facing an IBGP neighbor where the BGP updates received
are re-advertised with a modified next-hop, a new local
label will be re-advertised too, to replace the original
one.
Create a binding table, in the form of a hash list, from the
original labels to the new labels. Since labels can be the
same on several routers, set the next-hop and the label as
the keys. Add the needed API functions to manage the hash
list.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Redistributing mpls vpn prefixes with a new label
requires picking up unused MPLS local labels.
Today, there is an MPLS label pool which is owned
by the zebra daemon. BGP gets a chunk of labels
that are shared with the multiple usage of the BGP
daemon. A label type attribute is used whenever
BGP needs a new label value.
The 'LP_TYPE_BGP_L3VPN_BIND' label type will be used
to allocate the MPLS labels that will be bound to
the original next-hop, and label value of an L3VPN
update.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no nexthop reachability information for
received MPLS VPN prefixes.
This information is necessary when BGP also acts
as LSR device, and is needed to create an MPLS entry
between two BGP speakers: the next-hop to pick-up
in the MPLS entry has to be connected.
The nexthop reachability information is available
for other non MPLS VPN prefixes, and is handled
by the bgp nexthop cache (bnc) contexts.
Extend the usage of the BNC contexts for L3VPN
prefixes.
Note that the MPLS VPN routes had to be redistributed
as before, to avoid breaking existing deployments
that use FRR as route reflectors. Because of this, the
nexthop reachability status has been maintained to OK
for MPLS VPN prefixes.
Note also that the label allocation per nexthop tracking
was wrongly using the MPLS VPN safi to get a valid BNC
context, when choosing which label to return in the
'vpn_leak_from_vrf_get_per_nexthop_label()' function.
Fix this by using SAFI_UNICAST instead.
Fixes: 577be36a41 ("bgpd: add support for l3vpn per-nexthop label")
Link: https://github.com/FRRouting/frr/pull/13380
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The label allocation per next-hop functionality is calling
the 'bgp_find_or_add_nexthop()' method using the SAFI_MPLS_VPN
safi parameter, whereas the call is supposed to apply to
unicast paths.
Fix this by using the SAFI_UNICAST safi parameter in the call.
Simplify the vpn_leak_from_vrf_get_per_nexthop_label() API by
removing the safi parameter from the function.
Fixes: 577be36a41 ("bgpd: add support for l3vpn per-nexthop label")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When acting as intermediate device for BGP signaling, and
as transit device for data traffic, the device is not able
to modify the label value from incoming MPLS VPN updates:
- as BGP device, modifying the label value is necessary
when redistributing VPN prefixes with its own next-hop.
- as transit device that connects two ethernet segments
on separate interfaces, the return MPLS traffic must be
handled: the modified label value must be swapped with
the original label value and sent back to the original
next-hop.
The border router use case can be taken as example, when
it acts both as transit and as BGP device:
- When receiving updates from a border router peer, and where
interior traffic is expected to transit through the local
border router.
- When receiving updates from interior devices, and where
exterior traffic will transit through the local border router.
In those two situations, a new label is bound to the received
entry, and the entry is advertised to a new peer with the new
label. In the same time, an MPLS entry is created to handle
return traffic with the new mpls label: the traffic would be
swapped to the original MPLS label and the original next-hop.
This is the first commit of a series of patches, that address
the above mentioned issue.
The first commit introduces a new per-interface command:
> interface eth0
> [no] mpls bgp l3vpn-multi-domain-switching
> exit
This command will authorise mpls vpn updates to have a new
label value bound to the mpls vpn routes received over that
interface.
Link: https://www.rfc-editor.org/rfc/rfc3107.html#section-3
> When a BGP speaker redistributes a route, the label(s) assigned to
> that route must not be changed (except by omission), unless the
> speaker changes the value of the Next Hop attribute of the route.
Link: https://www.rfc-editor.org/rfc/rfc3031.html#section-4.6
Link: https://www.rfc-editor.org/rfc/rfc4364.html#section-10
sub-chapter b.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Create a bgp_labels_same() function that does the
same operations as the static function labels_same from
bgp_mplsvpn.c.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This reverts commit b1d29673ca.
This commit introduced a crash. When the VRF is deleted, the RIPNG
instance should not be freed, because the NB infrastructure still stores
the pointer to it. The instance should be deleted only when it's actually
deleted from the configuration.
To reproduce the crash:
```
frr# conf t
frr(config)# vrf vrf1
frr(config-vrf)# exit
frr(config)# router ripng vrf vrf1
frr(config-router)# exit
frr(config)# no vrf vrf1
frr(config)# no router ripng vrf vrf1
vtysh: error reading from ripngd: Resource temporarily unavailable (11)Warning: closing connection to ripngd because of an I/O error!
frr(config)#
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This reverts commit 3d1588d8ed.
This commit introduced a crash. When the VRF is deleted, the RIP instance
should not be freed, because the NB infrastructure still stores the
pointer to it. The instance should be deleted only when it's actually
deleted from the configuration.
To reproduce the crash:
```
frr# conf t
frr(config)# vrf vrf1
frr(config-vrf)# exit
frr(config)# router rip vrf vrf1
frr(config-router)# exit
frr(config)# no vrf vrf1
frr(config)# no router rip vrf vrf1
vtysh: error reading from ripd: Resource temporarily unavailable (11)Warning: closing connection to ripd because of an I/O error!
frr(config)#
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
BGP cannot decide to disseminate the safi based upon the
bgp suppress-fib command. Modify the code to look at
the safi for the decision to communicate to a peer the
particular node.
Ticket: #3402926
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fixes a crash associated with attempting to read beyond the end of the
stream when parsing ASLA Sub-TLV.
```
Program received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
subtlv_len=13 '\r') at isisd/isis_tlvs.c:1473
at isisd/isis_tlvs.c:3264
context=<optimized out>, mtid=<optimized out>) at isisd/isis_tlvs.c:6078
indent=4) at isisd/isis_tlvs.c:6142
avail_len=<optimized out>, context=<optimized out>) at isisd/isis_tlvs.c:7032
at isisd/isis_tlvs.c:7054
(gdb)
```
Caught by fuzzer.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
```
bgpd/bgp_vty.c:865:5: warning: conflicting types for ‘bgp_vty_return’ due to enum/integer mismatch; have ‘int(struct vty *, enum bgp_create_error_code)’ [-Wenum-int-mismatch]
865 | int bgp_vty_return(struct vty *vty, enum bgp_create_error_code ret)
| ^~~~~~~~~~~~~~
In file included from ./bgpd/bgp_mplsvpn.h:15,
from bgpd/bgp_vty.c:48:
./bgpd/bgp_vty.h:148:12: note: previous declaration of ‘bgp_vty_return’ with type ‘int(struct vty *, int)’
148 | extern int bgp_vty_return(struct vty *vty, int ret);
| ^~~~~~~~~~~~~~
```
Fixing stuff regarding GCC13.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
- log names of datastores not numbers
- improve logging for mgmt_msg_read
- Rather than use a bool, instead store the pending const string name of
the command being run that has postponed the CLI. This adds some nice
information to the logging when enabled.
Signed-off-by: Christian Hopps <chopps@labn.net>
We were using the pim interface socket to send the register
stop msg, it works fine in cases where the interface on which
register msg is received and the interface on which the register-stop
msg is supposed to be sent is the same.
But when the interfaces are different, msg send fails because
the outgoing interface is not right.
Fixes: #13774
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
In pbrd, don't encode a rule without a table. There are cases
where the zapi encoding was incorrect because the 4-octet
table id was missing. In zebra, mask off the ECN bits in the
TOS byte when encoding an iprule to match netlink's
expectation.
Signed-off-by: Mark Stapp <mjs@labn.net>
We are seeing some frequent test failures with
setting the nexthop correctly. At this point
in time, I have no idea what is going wrong,
but I don't have a bunch of information either,
so let's add the local and remote values.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When trying to list advertised-routes for instance, it's not possible for now.
Relax this a bit, and allow doing this, instead of returning an error:
% Malformed address or name.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
