And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a common api that formats a time interval into a string
with different output for short and longer intervals. We do
this in several places, for cli/ui output.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Today vtysh can show the ip/ip6 routes through several commands:
- show_route_cmd
- show_route_detail_cmd
- show_route_summary_cmd
- show_route_table_cmd
- show_route_table_vrf_cmd
- show_route_all_table_vrf_cmd
Each command has its own set of filter rules:
- show_route_cmd can filter by vrf, protocol, tag, ... but not by table
- show_route_table_cmd always filter by table
- show_route_table_vrf_cmd always filter by table and can filter by vrf
too
- show_route_all_table_vrf_cmd show all route in any table for a vrf (or
all)
To reduce the number of commands and provide a possibility to filter by
any key add possibility for the show_route_cmd to filter by table with a
specific value or all to get route in all tables.
Then the show_route_table_cmd, show_route_table_vrf_cmd and
show_route_all_table_vrf_cmd functions can be removed as they are covered
by the generic show_route_cmd function.
It is to be noted that when zebra is started by default, it is possible
to execute show ip route command with both vrf and table parameters,
whereas before the command was not displayed. This is due to the fact
that this combination is only permitted when zebra is launched with vrf
network namespace mode. There, if zebra is configured with vrf-lite
backend, then a vty error message informs the user that the combination
of both table and vrf is not possible.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Use a hash walker/iterator instead of a temporary list to
show zebra's nexthop-groups/nexthop-hash-entries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Nexthop groups as a whole do not make sense to have a vrf'ness
As that you can have a arbitrary number of nexthops that point
to separate vrf's.
Modify the code to make this distinction, by clearly delineating
the line between the nhg and the nexthop a bit better.
Nexthop groups having a vrf_id only make sense if you are using
network namespaces to represent them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra implementation of nexthop groups has
two types of nexthops groups currently. Singleton
objects which have afi's and combined nexthop groups
that do not. Specifically call this out in the code
to make this distinction.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a config that disables use of kernel-level nexthop ids.
Currently, zebra always uses nexthop ids if the kernel supports
them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
There's confusion between the nexthop-group configuration and a
zebra-specific show command. For now, make the zebra show
command string RIB-specific until we're able to unify these
paths.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
We were creating `other` tables in rib_del(), vty commands, and
dataplane return callback via the zebra_vrf_table_with_table_id()
API.
Seperate the API into only a lookup, never create
and added another with `get` in the name (following the standard
we use in other table APIs).
Then changed the rib_del(), rib_find_rn_from_ctx(), and show route
summary vty command to use the lookup API instead.
This was found via a crash where two different vrfs though they owned
the table. On delete, one free'd all the nodes, and then the other tried
to use them. It required specific timing of a VRF existing, going away,
and coming back again to cause the crash.
=23464== Invalid read of size 8
==23464== at 0x179EA4: rib_dest_from_rnode (rib.h:433)
==23464== by 0x17ACB1: zebra_vrf_delete (zebra_vrf.c:253)
==23464== by 0x48F3D45: vrf_delete (vrf.c:243)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== by 0x13D8C5: sigint (main.c:172)
==23464== by 0x48DD25C: quagga_sigevent_process (sigevent.c:105)
==23464== by 0x48F0502: thread_fetch (thread.c:1417)
==23464== by 0x48AC82B: frr_run (libfrr.c:1023)
==23464== by 0x13DD02: main (main.c:483)
==23464== Address 0x5152788 is 104 bytes inside a block of size 112 free'd
==23464== at 0x48369AB: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B25B8: qfree (memory.c:129)
==23464== by 0x48EA335: route_node_destroy (table.c:500)
==23464== by 0x48E967F: route_node_free (table.c:90)
==23464== by 0x48E9742: route_table_free (table.c:124)
==23464== by 0x48E9599: route_table_finish (table.c:60)
==23464== by 0x170CEA: zebra_router_free_table (zebra_router.c:165)
==23464== by 0x170DB4: zebra_router_release_table (zebra_router.c:188)
==23464== by 0x17AAD2: zebra_vrf_disable (zebra_vrf.c:222)
==23464== by 0x48F3F0C: vrf_disable (vrf.c:313)
==23464== by 0x48F3CCF: vrf_delete (vrf.c:223)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== Block was alloc'd at
==23464== at 0x4837B65: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B24A2: qcalloc (memory.c:110)
==23464== by 0x48EA2FE: route_node_create (table.c:488)
==23464== by 0x48E95C7: route_node_new (table.c:66)
==23464== by 0x48E95E5: route_node_set (table.c:75)
==23464== by 0x48E9EA9: route_node_get (table.c:326)
==23464== by 0x48E1EDB: srcdest_rnode_get (srcdest_table.c:244)
==23464== by 0x16EA4B: rib_add_multipath (zebra_rib.c:2730)
==23464== by 0x1A5310: zread_route_add (zapi_msg.c:1592)
==23464== by 0x1A7B8E: zserv_handle_commands (zapi_msg.c:2579)
==23464== by 0x19D689: zserv_process_messages (zserv.c:523)
==23464== by 0x48F09F8: thread_call (thread.c:1599)
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Change the wording of the flag indicating we have received
a nexthop group from the kernel with a different ID but
is fundamentally identical to one we already have.
It was colliding with a flag of similar name in the nexthop struct.
Change it from NEXTHOP_GROUP_DUPLICATE -> NEXTHOP_GROUP_UNHASHABLE
since it is in fact unhashable.
Also change the wording of functions and comments referencing the same
problem.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In lieu of the fact that we probably shouldn't change show
command output too much, changing this to only give nhe_id
output when the user explicitly asks for it. Probably only
going to be used for debugging for now anyway.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When querying for detailed route information, show the nexthop
group id for its nh_hash_entry in the output before listing the
nexthops.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some more detailed output to `show nexthop-group`.
It closely resembles the output of `show ip routes`.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Switch the nhg_connected tree structures to use the new
RB tree API in `lib/typerb.h`. We were using the openbsd-tree
implementation before.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add cli to show nhg_hash_entry's by ID.
Add cli to show nhg_hash_entry info for interfaces and remove
just listing ID's in `show interface *`
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Create a nhg_depenents tree that will function as a way
to get back pointers for NHE's depending on it.
Abstract the RB nodes into nhg_connected for both depends and
dependents. This same struct is used for both.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
