frrscript_load now loads a function instead of a file, so frrscript_unload
should be renamed since it does not unload a function.
Signed-off-by: Donald Lee <dlqs@gmx.com>
- Remove incorrect requirement for `service integrated-vtysh-config`
when producing a delta.
- Add `--test-reset` option which suppresses non-parseable lines from the
produced delta
- Use new features in common_config.py
Signed-off-by: Christian Hopps <chopps@labn.net>
TMUX and Screen support when running topotests inside docker. This
allows the gdb, shell and vtysh features to correctly work even when
running the tests inside docker.
Add options:
--asan-abort :: aborts the process on ASAN errors
--strace-daemons :: strace some or all daemons
Signed-off-by: Christian Hopps <chopps@labn.net>
Some BGP updates received by BGP invite local router to
install a route through itself. The system will not do it, and
the route should be considered as not valid at the earliest.
This case is detected on the zebra, and this detection prevents
from trying to install this route to the local system. However,
the nexthop tracking mechanism is called, and acts as if the route
was valid, which is not the case.
By detecting in BGP that use case, we avoid installing the invalid
routes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Since the common CLI code calls nb_init, allow specifying some modules
to load by overriding test_yang_models.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a new topotest that features a topology with seven routers spread
across four OSPF areas:
* 1 backbone area;
* 1 regular non-backbone area (0.0.0.1);
* 1 stub area (0.0.0.2);
* 1 NSSA area (0.0.0.3).
All routers have both GR and GR helper functionality enabled in
the configuration. The test consists of restarting each router,
one at time, and checking that all forwarding planes (and LSDBs)
are kept intact during those restarts.
A successful run takes about three minutes to finish.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Using "write memory" to save the daemons' configurations before
restarting them can cause log files to stop working correctly. Add
a new "save_config" to the kill_router_daemons() function to prevent
that from happening when saving the configurations isn't necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Speedup (large topo): OLD: ~6 minutes NEW: ~1 second
(when paired with generate_support_bundle.py changes)
- Collect from each node in parallel
Bug fixes:
- sub-directory test name was the same internal pytest function name
for any test, and not the actual test name.
Signed-off-by: Christian Hopps <chopps@labn.net>
On a loaded machine running FRR with ASAN I've got the following result:
INFO: waiting MSDP connection from peer 10.254.254.3 on router r1
INFO: 'router_json_cmp' polling started (interval 1 secs, maximum 30 tries)
INFO: 'router_json_cmp' succeeded after 22.53 seconds
Which is very close to the limit, so lets bump the value 4x to avoid a
test false positive.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This python fixture was way too complex for what is needed.
Eliminate gratuitous options/over-engineering:
- Change from non-deterministic `wait` and `attempts` to a single
`retry_timeout` value. This is both more deterministic, as well as
what the user should actually be thinking about.
- Use a fixed 2 second pause between executing the wrapped function
rather than a bunch of arbitrary choices of 2, 3 and 4 seconds
spread all over the test code.
- Get rid of the multiple variables for determining what "Positive" and
"Negative" results are. Instead just implement what all the user code
already wants, i.e., boolean False or a str (errormsg) means
"Negative" result otherwise it's a "Positive" result.
- As part of the above the inversion logic is much more comprehensible
in the fixture code (and more correct to boot).
Signed-off-by: Christian Hopps <chopps@labn.net>
Pylint cleanup in commit 914faab594 removed a crucial function
parameter that inverted the logic of verify function calls.
Signed-off-by: Christian Hopps <chopps@labn.net>
Modify both the default and vrf ospf6 topologies to include a test
where write-multiplier is configured to a non-default value and
the ospf6 neighbors are reset then checked.
Run black on both test files.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Currently, the dynamic hostname cache is global. It is incorrect because
neighbors in different VRFs may have the same system ID and different
hostnames.
This also fixes a memory leak - when the instance is deleted, the cache
must be cleaned up and the cleanup thread must be cancelled.
Fixes#8832.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
ospf6d (and all other daemons except zebra) doesn't correctly process
`interface X vrf Y`, because it doesn't know existing VRFs at the time
of configuration file reading. Therefore it doesn't apply configuration
provided in the interface node.
Fix the problem by removing `vrf Y` part, having just an interface name
is enough.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When filtering sessions on show bgp summary with failed, established,
neighbor and remote-as options, add a counter of displayed neighbors
in addition to the total number of neighbor :
"Displayed neighbors X"
ubuntu# show bgp summary failed remote-as external
IPv4 Unicast Summary (VRF default):
Neighbor EstdCnt DropCnt ResetTime Reason
10.200.200.2 0 0 never Waiting for NHT
172.16.29.2 0 0 never Waiting for NHT
10.22.1.2 0 0 never Waiting for NHT
Displayed neighbors 3
Total number of neighbors 5
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display on which VRF/view the neighbor was not found. Useful when
selecting "vrf all".
Before patch:
No such neighbor in this view/vrf
After patch:
No such neighbor in VRF default
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Issue: There was an error reported by Pylint regarding "expected" keyword:
Unexpected keyword argument 'expected' in function call (unexpected-keyword-arg)
Fix: We have defined expected keyword in all topojson APIs.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Following functionality is covered:
+--------+ BGP +--------+ BGP +--------+ +--------+
SN1 | | IPv4/v6 | | EVPN | | | |
======+ Host1 +---------+ PE1 +------+ PE2 +------+ Host2 +
| | | | | | | |
+--------+ +--------+ +--------+ +--------+
Host1 is connected to PE1 and host2 is connected to PE2
Host1 and PE1 have IPv4/v6 BGP sessions.
PE1 and PE2 gave EVPN session.
Host1 advertises IPv4/v6 prefixes to PE1.
PE1 advertises these prefixes to PE2 as EVPN type-5 routes.
Gateway IP for these EVPN type-5 routes is host1 IP.
Host1 MAC/IP is advertised by PE1 as EVPN type-2 route
Following testcases are covered:
TC_1:
Check BGP and zebra states for above topology at PE1 and PE2.
TC_2:
Stop advertising prefixes from host1. It should withdraw type-5 routes. Check
states at PE1 and PE2
Advertise the prefixes again. Check states.
TC_3:
Shut down VxLAN interface at PE1. This should withdraw type-2 routes. Check
states at PE1 and PE2.
Enable VxLAN interface again. Check states.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
To start we use 10k static route config. This test goes along with
recent batching changes it will fail w/o them (b/c some operations w/o
batching take 100 times as long).
This test should be added to over time for other large config
items (e.g., acl, policy, etc)
Signed-off-by: Christian Hopps <chopps@labn.net>
Test uses staticd which required some C++ header protections.
Additionally, the test also runs in the ubuntu20 docker container as
grpc is supported there by the packaging system.
Signed-off-by: Christian Hopps <chopps@labn.net>
similarly to what was done for IS-IS in commit 01d43141, combine
the SRGB and SRLB commands for OSPF-SR, so that we can replace
overlapping ranges in one sweep change.
Also allow the range configuration to be stored before SR is enabled.
There is no reason why we should not - in fact that constraint meant
that we were always requesting the default label ranges regardless
of what we actually wanted to use.
Finally, update the topotests now that we do not need to refresh
the SRGB/SRLB/MSD after disabling SR. Note that the prefix-sid still
needs to be re-added.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Modify VRF/view display in show bgp summary:
- to be more concise
- to display on which VRF/view no neighbor was found
Before patch:
ubuntu# show bgp vrf all summary
Instance default:
IPv4 Unicast Summary:
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary:
Instance private:
IPv4 Unicast Summary:
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found
% No BGP neighbors found
After patch:
ubuntu# show bgp vrf all summary
IPv4 Unicast Summary (VRF default):
BGP router identifier XX.XX.XX.XX, local AS number XXXX vrf-id 0
(...)
IPv6 Unicast Summary (VRF default):
(...)
IPv4 Unicast Summary (VRF private):
(...)
ubuntu# show bgp vrf all ipv4 multicast summary
% No BGP neighbors found in VRF default
% No BGP neighbors found in VRF private
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
New OSPFv3 NSSA test:
* When a static route is redistributed to an NSSA router it should be
type 7 and should show up in OSPFv3 route database.
* Test LSA Type 7 and route removal.
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
https://github.com/FRRouting/frr/pull/5865#discussion_r597670225
As this comment says. ZEBRA_FLAG_XXX should not have been used.
To communicate SRv6 Route Information. A simple Nexthop Flag would
have been sufficient for SRv6 information. And I fixed the whole
thing that way.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The "show sharp segment-routing srv6" command was a
json output command, but it did not follow the common
practice of the other commands.
It follows the review and outputs the json format by
using the json keyword. Otherwise, it produces human
readable output.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit fix bgpd's prefix-sid type4,5 feature which has
miss implementation from https://github.com/FRRouting/frr/pull/5653
was merged. Due to some nessesary lines are not presented.
When bgpd receives multi update message with same service-sid on
prefix-sid type-5 attribute, bgpd will crash arround path-attribute's
values object reference count.
And also, this commit add a topotest to check that feature work fine.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works.
This commit add new topotest to verify SRv6-manager's functionality.
Following tests are performed on this topotest.
- check that SRv6-locator is set correctly
- check that default SRv6-function locator is set correctly
- check that SRv6-function is installed as ipv6 route correctly
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
