The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
This function should be called with a known vrf_id. All other cases, the
other API should be called.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For supporting vrf based on namespaces, it is possible that an interface
with the same index is present. This is the case for loopback
interfaces. For that, for each query, if the interface is not found
, matching the vrf identifier, then a new interface is created, when the
backens for VRF is NETNS.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Modify if_lookup_by_index to accept a VRF_UNKNOWN
as a vrf_id. This will cause it to look in all
vrf's for the interface pointer.
Subsequently all if_XXXX functions that call this function
will also get this behavior.
VRF_UNKNOWN *should* not be used for interface creation
as that this will break some core assumptions.
This work is part of allowing vrf route leaking. Currently
it is possible to create a route in the linux kernel that has
a nexthop across vrf boundaries.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If the p1 and p2 arguments pointed to identical strings ending with
a non-numeric character (e.g. "lo"), this function would return -1
instead of 0 as one would expect. This inconsistency didn't matter
for sorted linked-lists but for red-black trees it's a major source
of problems.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Shows known values in the appropriate naming domain when the user hits
<?> or <Tab>. This patch only works in the telnet CLI, the next patch
adds vtysh support.
Included completions:
- interface names
- route-map names
- prefix-list names
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The code was making the correct assumption
that the v4 and v6 addresses start in the
same spot in memory and since we were looking
at a v6 prefix it would just work. This
causes distress in SA systems, so let's just
make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
When link-params is configured it auto starts displaying
6000-02# conf t
dell-s6000-02(config)# int swp1
dell-s6000-02(config-if)# link-params
dell-s6000-02(config-link-params)# admin-grp 0x12345678
dell-s6000-02(config-link-params)# end
dell-s6000-02# show run
interface swp1
link-params
enable
metric 0 <----Remove the bw lines
max-bw 1.25e+06
max-rsv-bw 1.25e+06
unrsv-bw 0 1.25e+06
unrsv-bw 1 1.25e+06
unrsv-bw 2 1.25e+06
unrsv-bw 3 1.25e+06
unrsv-bw 4 1.25e+06
unrsv-bw 5 1.25e+06
unrsv-bw 6 1.25e+06
unrsv-bw 7 1.25e+06
admin-grp 305419896
exit-link-params
!
I'd like to reduce this to:
interface enp0s3
ip igmp
ip pim sm
link-params
enable
admin-grp 0x12345678 <----- Fix this to be what we entered
exit-link-params
!
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* move netlink code from zebra_nc.c to kernel_netlink.c;
* move vrf CLI commands from if.c/interface.c to vrf.c/zebra_vrf.c;
* move declaration of the 'ns' structure to a header file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We can't use if_lookup_prefix() in rip_update_process() because this
function uses prefix_cmp() internally to try matching an interface
address to a static neighbor's address.
Since prefix_cmp() tries to match exact prefixes, if_lookup_prefix()
was always returning NULL.
What we really need here is to use prefix_match(), which checks if
one prefix includes the other (e.g. one /24 interface including a /32
static neighbor's address). The fix then is to replace the call to
if_lookup_prefix() and use if_lookup_address() instead, which uses
prefix_match() internally.
Fixes IxANVL RIP test 17.1
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since we have autoconf results from a wide swath of target platforms, we
can go remove checks that have the same result on all systems.
This also removes several "fallback" implementations of functions that,
at some point in the history, weren't available on all target platforms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Prepares the library CLI functions for concurrent config access. Note
the vty->index pointer is still kept functional for the daemons to use.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
This removes the BSD specific usage of struct sockaddr_dl
hardware address. This unifies to use explict hw_addr member for
the address, and zebra specific enumeration for the link layer
type.
Additionally the zapi is updated to never send platform specific
structures over the wire, but the ll_type along with hw_addr_len
and hw_addr are now sent for all platforms.
Based on initial work by Paul Jakma.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
#
# Author: Timo Teräs <timo.teras@iki.fi>
#
# rebase in progress; onto 9c2f85d
# You are currently editing a commit while rebasing branch 'renato' on '9c2f85d'.
#
# Changes to be committed:
# modified: isisd/isis_circuit.c
# modified: lib/if.c
# modified: lib/if.h
# modified: lib/zclient.c
# modified: zebra/interface.c
# modified: zebra/interface.h
# modified: zebra/kernel_socket.c
# modified: zebra/rt_netlink.c
# modified: zebra/rtadv.c
# modified: zebra/zserv.c
#
# Untracked files:
# "\033\033OA\033OB\033"
# 0001-bgpd-fix-build-on-Solaris.patch
# ldpd/
# redhat/ldpd.init
# redhat/ldpd.service
# tags
#
Resolved several memory leaks caused by ifdown/ifup the vrf device or
a swp port. For bgp/zebra/ospf/ospf6, bouncing the vrf device would cause
a linked list, Interface, and route-table to get leaked. For ospf6,
bouncing the swp device also caused leaks of Connected and Prefix entries.
Ticket: CM-10841
Signed-off-by: Don Slice
Reviewed-By: Donald Sharp
Testing Done: Manual testing, bgp and ospf mins passed, smokes had fewer failures than base
Fix lots of warnings. Some const and type-pun breaks strict-aliasing
warnings left but much reduced.
* bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to
(struct fifo), so just use that. Makes it clearer the beginning of
(struct bgp_advertise) is compatible with with (struct fifo), which seems
to be enough for gcc.
Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up
type-punning breaks strict aliasing warnings.
* bgp_packet.c: Use BGP_ADV_FIFO_HEAD.
(bgp_route_refresh_receive) fix an interesting logic error in
(!ok || (ret != BLAH)) where ret is only well-defined if ok.
* bgp_vty.c: Peer commands should use bgp_vty_return to set their return.
* jhash.{c,h}: Can take const on * args without adding issues & fix warnings.
* libospf.h: LSA sequence numbers use the unsigned range of values, and
constants need to be set to unsigned, or it causes warnings in ospf6d.
* md5.h: signedness of caddr_t is implementation specific, change to an
explicit (uint_8 *), fix sign/unsigned comparison warnings.
* vty.c: (vty_log_fixed) const on level is well-intentioned, but not going
to fly given iov_base.
* workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always
true for address of static variable. Correct but pointless warning in
this case, but use a 2nd pointer to shut it up.
* ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2
different 32 bit IDs into in (struct ospf6_route), and the resulting
type-pun strict-alias breakage warnings this causes. Need to use 2
different fields to fix that warning?
general:
* remove unused variables, other than a few cases where they serve a
sufficiently useful documentary purpose (e.g. for code that needs
fixing), or they're required dummies. In those cases, try mark them as
unused.
* Remove dead code that can't be reached.
* Quite a few 'no ...' forms of vty commands take arguments, but do not
check the argument matches the command being negated. E.g., should
'distance X <prefix>' succeed if previously 'distance Y <prefix>' was set?
Or should it be required that the distance match the previously configured
distance for the prefix?
Ultimately, probably better to be strict about this. However, changing
from slack to strict might expose problems in command aliases and tools.
* Fix uninitialised use of variables.
* Fix sign/unsigned comparison warnings by making signedness of types consistent.
* Mark functions as static where their use is restricted to the same compilation
unit.
* Add required headers
* Move constants defined in headers into code.
* remove dead, unused functions that have no debug purpose.
(cherry picked from commit 7aa9dcef80b2ce50ecaa77653d87c8b84e009c49)
Conflicts:
bgpd/bgp_advertise.h
bgpd/bgp_mplsvpn.c
bgpd/bgp_nexthop.c
bgpd/bgp_packet.c
bgpd/bgp_route.c
bgpd/bgp_routemap.c
bgpd/bgp_vty.c
lib/command.c
lib/if.c
lib/jhash.c
lib/workqueue.c
ospf6d/ospf6_lsa.c
ospf6d/ospf6_neighbor.h
ospf6d/ospf6_spf.c
ospf6d/ospf6_top.c
ospfd/ospf_api.c
zebra/router-id.c
zebra/rt_netlink.c
zebra/rt_netlink.h
When looking up the connected route, the delete was
causing crashes in OSPF due to the oi having copies
of the freshly deleted connected interface. Fix
code to first lookup the connected route and use that
instead of just deleting it.
Valgrind Findings:
==24112== Invalid read of size 1
==24112== at 0x4E8283F: ospf_intra_add_stub (ospf_route.c:614)
==24112== by 0x4E80B15: ospf_spf_process_stubs (ospf_spf.c:1064)
==24112== by 0x4E80F74: ospf_spf_calculate (ospf_spf.c:1269)
==24112== by 0x4E811C9: ospf_spf_calculate_timer (ospf_spf.c:1339)
==24112== by 0x5126230: thread_call (thread.c:1577)
==24112== by 0x401E00: main (ospf_main.c:377)
==24112== Address 0x7f56a09 is 9 bytes inside a block of size 40 free'd
==24112== at 0x4C29E90: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==24112== by 0x51290B3: zfree (memory.c:132)
==24112== by 0x51287F0: connected_free (if.c:987)
==24112== by 0x514406A: zebra_interface_address_read (zclient.c:1146)
==24112== by 0x4E5A81C: ospf_interface_address_add (ospf_zebra.c:262)
==24112== by 0x5144838: zclient_read (zclient.c:1397)
==24112== by 0x5126230: thread_call (thread.c:1577)
==24112== by 0x401E00: main (ospf_main.c:377)
Ticket: CM-10890
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
The connected_lookup_address function should really
be a connected_lookup_prefix function. Refactor
the code to use it.
Ticket: CM-10890
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Create the idea of a VRF_UNKNOWN, this is for a vrf where we don't
yet have the vrf_id for it yet.
Refactor the vrf_create code out of existence. We had two code
paths vrf_create and vrf_get. We should use vrf_get to create
the new vrf since XXX_get() creates the data structures now.
Signed-off-by: Donald Sharp
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The file if.c has a iflist that had the list of interfaces
in the default vrf. Remove this variable and replace
with a vrf_iflist lookup on the default vrf where it
was used.
Additionally, modify ptm code to iterate over all vrf's
when enabling ptm.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
ZEBRA_VRF_ACTIVE is a poor name for when a vrf is
actually active. Rename VRF_ACTIVE.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
We had two functions XXX_name and XXX_name_len
that both did the same thing. Remove the
XXX_rename_len functions.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
The vrf name comparison function was the same as the interface
comparison function. Combine the forces for the goodness of
mankind.
Ticket: CM-10184
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There are cases where we get an interface name but do not have a
corresponding vrf. We care about getting an interface pointer
so just provide a function that searches all vrf's for the ifp.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Radhicak Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ensure that during interface lookup (non-vty context), if the interface is
found in a different VRF, it is "moved" into the requested VRF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9579
Reviewed By: CCR-4194
Testing Done: Manual
Ticket:CM-9073
Reviewed By: sharpd
Testing Done:Manual, see ticket
Changed logic when "interface swpxx <vrf foo>" entered so that:
1. it matches when the command is entered without a vrf but the interface already exists in a vrf.
2. If the command is entered with a vrf name that is different than is defined by the kernel, the command is rejected.
3. If the call is made from other than the vty session, believe the new information and update the vrf accordingly.
Add the infrastructure to allow the vrf keyword.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This Change modifies what zebra thinks is an unnumbered interface.
If the interface is not a loopback and the prefixlength for the
interface is 32 than consider this an unnumbered interface.
Ticket: CM-8016
Reviewed by: CCR-3827
Testing: Full Regression Suites
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce a new command "interface IFNAME vrf N" to configure an
interface in the non-default VRF.
Till now, only zebra uses this command. Other daemons will install
the command when they support multiple VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/interface.c
An interface belongs to a specific VRF. So move the interface list
into the "struct vrf".
* vrf.c/vrf.h:
- add a new member "struct list *iflist" to the the "struct vrf";
- call if_init() in vrf_new();
- call if_terminate() in vrf_delete();
- add utilities to access the interface list and VRF ID in the
specified VRF.
* if.c/if.h:
- the global "iflist" now only exists for the default VRF;
- the global "if_master" is initialized on the definition;
- in if_create(), the interface is added into the list in the
specified VRF; if the VRF does not exist, create one;
- add parameters to if_init()/if_terminate() so that the
interface list in the VRF can be initialized/destroyed;
- in if_dump_all() scan the interfaces in all the VRFs;
- add a command "show address vrf N" to show addresses in a
specified VRF;
- add a command "show address vrf all" to show addresses in all
VRFs;
- new APIs ifxxx_vrf() are added to access an interface in a
specified VRF.
The old interface APIs (the global variable "iflist" and the API
functions) are not changed to keep the backward compatibility.
The new APIs are used in the daemons which support multiple VRFs
(till now only zebra).
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/if.c
