We can use PIMADDR_ANY instead of INADDR_NONE to initalize rp->rpf_addr
when there is no rp configured for group_all.
Signed-off-by: sarita patra <saritap@vmware.com>
These are sprinkled relatively widely through the PIM codebase, so for
the time being reduce the "compiler warning surface" by moving them
forward to proper types without actual implementations.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replaces comparison against INADDR_ANY, so we can do IPv6 too.
(Renamed from "pim_is_addr_any" for "pim_addr_*" naming pattern, and
type fixed to bool.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem Statement:
==================
on rp_change, PIM processes all the upstream in a loop and for selected
upstreams PIM has to send join/prune based on the RPF changed.
join and prune packets are not getting aggregated in a single packet.
Root Cause Analysis:
====================
on pim_rp_change pim_upstream_update() gets called for selected upstreams.
This API calculates to whom it has to send join and to whom it has to
send prune via API pim_zebra_upstream_rpf_changed(). This API peprares
the upstream_switch_list list per interface and inserts the group and
sources.
Now PIM is still in the pim_upstream_update() API context, i.e PIM
is still processing the same upstream. In the last there is a
call to pim_zebra_update_all_interfaces() which processes the
upstream_switch_list list, sends the packets out and clears the list.
Fix:
====
Don't process the upstream_switch_list in the upstream context.
process all the upstreams prepare the upstream_switch_list and then
process in one go. This will club all the S,G entries.
It also saves list cleanup with respect to memory allocation and
deallocation multiple times.
Signed-off-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The Bootstrap message RX path needs a RPF check for the BSR address,
and this is implemented both incorrectly as well as quite ugly.
Clean up and fix case when we have multiple interfaces to the same LAN
and/or ECMP nexthops (both would cause message duplication, the former
can even cause BSM forwarding loops.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most users of if_lookup_address_exact only cared about whether the
address is any local address. Split that off into a separate function.
For the users that actually need the ifp - which I'm about to add a few
of - change it to prefer returning interfaces that are UP.
(Function name changed due to slight change in behavior re. UP state, to
avoid possible bugs from this change.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
pimd's include files are very interdependent. Let's chop that down a
bit to gain some flexibility.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem Statement:
==================
valgrind shows memleaks in rp_table, when pimd shuts down gracefully.
2020-05-05 22:09:29,451 ERROR: Memory leaks in router [r4] for daemon [pimd]
2020-05-05 22:09:29,451 ERROR: Memory leaks in router [r4] for daemon [zebra]
2020-05-05 22:09:29,637 ERROR: Found memory leak in module pimd
2020-05-05 22:09:29,638 ERROR: ==6178== 184 (56 direct, 128 indirect) bytes in 1 blocks are definitely lost in loss record 21 of 21
2020-05-05 22:09:29,638 ERROR: ==6178== at 0x4C2FFAC: calloc (vg_replace_malloc.c:762)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x4E855EE: qcalloc (memory.c:111)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x4EAA43C: route_table_init_with_delegate (table.c:52)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x1281A1: pim_rp_init (pim_rp.c:114)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x11D0F8: pim_instance_init (pim_instance.c:117)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x11D0F8: pim_vrf_new (pim_instance.c:150)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x4EB1BEC: vrf_get (vrf.c:209)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x4EB2B2F: vrf_init (vrf.c:493)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x11D227: pim_vrf_init (pim_instance.c:217)
2020-05-05 22:09:29,638 ERROR: ==6178== by 0x11BBAB: main (pim_main.c:121)
Fix:
====
rp_info is allocated in pim_rp_init API. rp_info pointer is present
in rp_list and rp_table. In rp_list cleanup, the memory for rp_info
gets freed. rp_table clean up should be done first and then rp_list.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
... the PIM code is kinda misusing prefix lists to match addresses.
Considering the weird semantics of access-lists, I can't fault it.
However, prefix lists aren't great at matching addresses by default,
since they try to match the prefix length too. So, here's an "address
match mode" for prefix lists to get that to work more reasonably.
Fixes: #8492
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
This command has been added in the context of
PIM BSM functionality. This command will clear the
data structs having bsr information.
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When creating a pim instance, we were allocating table information
but never freeing it. Do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Issue 1: "show ip pim interface traffic" not show prune TX/RX
Rootcause : not added the variable in the json
Fix : add prune TX/RX in show ip pim interface traffic json
Issue 2: "show ip pim rp-info" not shows the key iAmRp when it is false
Rootcause: Only display the key when the value is true.
Fix: add iAmRp as false in show ip pim rp-info json
Issue 3: "show ip pim rp-info" not showing outbound interface if it is empty
Rootcause: Only display when there is any OIL
Fix: When RP is not reachable then, the outbound interface is Unknown
The command "show ip pim rp-info json" not displaying the outbound
interafce if it is unknown
Signed-off-by: Sarita Patra <saritap@vmware.com>
Problem: Route node is not de referenced after search when pim debug events are
not enabled when pim_rp_find_match_group is called. So this memory will not get
released when route node is deleted after hitting this path.
RCA: Dereferencing is done inside debug condition.
Fix: Moving outside debug condition
Signed-off-by: Saravanan K <saravanank@vmware.com>
Convert the upstream_list and hash to a rb tree, Significant
time was being spent in the listnode_add_sort. This reduces
this time greatly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A variety of buffer overflow reads and crashes
that could occur if you fed bad info into pim.
1) When type is setup incorrectly we were printing the first 8 bytes
of the pim_parse_addr_source, but the min encoding length is
4 bytes. As such we will read beyond end of buffer.
2) The RP(pim, grp) macro can return a NULL value
Do not automatically assume that we can deref
the data.
3) BSM parsing was not properly sanitizing data input from wire
and we could enter into situations where we would read beyond
the end of the buffer. Prevent this from happening, we are
probably left in a bad way.
4) The received bit length cannot be greater than 32 bits,
refuse to allow it to happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When configuring a RP, dissallow the choice of 0.0.0.0 or
255.255.255.255 as the address as that they make no sense
what so ever.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were adding a newline for the source in some cases
but not others and tighten up the display of data
eva# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source
10.254.0.1 224.0.0.0/4 lo yes Static
4.4.4.4 225.1.2.3/32 abcdefghijklmno yes Static
10.0.20.45 226.200.100.100/32 r1-eth0 no Static
eva#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
