The FRR community keeps getting asked about what is supported or not.
Try to clarify in an additional spot what is and what is not supported.
Where people interested in using PIM might have a chance at actually
seeing the notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp neighbor password command was not documented additionally
the fact that you may need to instruct the kernel to have more
memory available for tcp sockets when using this feature on a large
number of peers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide a more succinct summary of what FRR is, what it does, where it
sits in the network stack. Also remove some outdated comments about
features.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
router-id is buried deep in "show running-config", this new
command makes it easy to retrieve the user configured router-id.
Example:
# configure terminal
(config)# router-id 1.2.3.4
(config)# end
# show router-id
router-id 1.2.3.4
# configure terminal
(config)# no router-id 1.2.3.4
(config)# end
# show router-id
#
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Allow 'ip igmp join' to join group for any source if no source is
specified.
Disallow joining source "0.0.0.0" as it is used to define an
any-source multicast group.
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
doc/user/bgp.rst:420: WARNING: Title underline too short.
Reject routes with AS_SET or AS_CONFED_SET types
-------------------------------
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add support for labelled nexthops in nexthop-group
vtysh configuration. Also update the PBR doc where
the cli is described.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
`set vrf NAME` allows the pbr map to point to an arbitrary vrf table.
`set vrf unchanged` will use the interface's vrf for table lookup.
Further, add functionality for pbr to respond to interface events
such as interface vrf changes & interface creation/deletion.
Ex)
ubuntu_nh# show pbr map
pbr-map TEST valid: 1
Seq: 1 rule: 300 Installed: 3(1) Reason: Valid
SRC Match: 3.3.3.3/32
VRF Unchanged (use interface vrf)
pbr-map TEST2 valid: 1
Seq: 2 rule: 301 Installed: 3(2) Reason: Valid
SRC Match: 4.4.4.4/32
VRF Lookup: vrf-red
root@ubuntu_nh:/home# ip rule show
0: from all lookup local
300: from 3.3.3.3 iif dummy2 lookup main
300: from 3.3.3.3 iif dummyVRF lookup 1111
301: from 4.4.4.4 iif dummy1 lookup 1111
301: from 4.4.4.4 iif dummy3 lookup 1111
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com-
Add some doc information for the new nexthop group commands. Also
had to add some for ones that were missing, which we are adding
additional commands to.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
getrusage, in a heavily stressed system, can account for
signficant running time due to process switching to the kernel.
Allow the end-operator to specify `--disable-cpu-time` to
avoid this call. Additionally we cause `show thread cpu` to
not show up if this is selected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
this table identifier can be used for policy routing. incoming entries
are locally exported to that local table identifier.
note that so that the user applies the new table identifier to all
entries, the user should flush local tables first.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
FRR supports the ability to turn off the negotation of bgp capabilities.
Provide a few bread crumbs to the operator that it might not be as
useful as they would hope.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Current autocompletion works only for simple "vrf NAME" case.
This commit expands it also for the following cases:
- "nexthop-vrf NAME" in staticd
- usage of $varname in many daemons
All daemons are updated to use single varname "$vrf_name".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Update the user docs to have information about the `show bgp update-group..
group of commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modification of the documentation for the `ip pim sm` command in order to avoid the understanding of an incompatibility with IGMP on the interface.
Signed-off-by: Alexis Royer <alexis.royer@gmail.com>
Allow bgp to store and pass through a different distance than
normal for installing into the rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FRR documentation had no discussion about how Administrative
Distance is used. Update the documentation to reflect the reality
on the ground.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add notes to several docs about the limits to FRR's current
MPLS-TE support, which is limited to some routing protocol
LSA/TLV support. It wasn't very clear that FRR does not offer
a complete TE/RSVP-TE solution at this time.
Also removed some stale info about configure script options.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a warning to the user documentation about v6 ecmp route
deletion and what version of the linux kernel that you should
be using.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The documentation says "match aspath" to match an AS path in a
route-map while the directive is "match as-path".
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
The v2 and v3 ospf documentation was suggesting
that the user should use a deprecated command.
Fixes: #4734
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the documentation of zebra is appended with that command.
PR=61261
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Thibaut Collet <thibaut.collet@6wind.com>
