Reachable router information is used by OSPF opaque clients in order
to determine if the router advertising the opaque LSA data is
reachable (i.e., 2-way conectivity check).
Signed-off-by: Christian Hopps <chopps@labn.net>
The reachable router table is used by OSPF opaque clients in order to
determine if the router advertising the opaque LSA data is
reachable (i.e., 2-way conectivity check).
Signed-off-by: Christian Hopps <chopps@labn.net>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
The commands:
router isis 1
mpls-te on
no mpls-te on
mpls-te on
no mpls-te on
!
Will crash
Valgrind gives us this:
==652336== Invalid read of size 8
==652336== at 0x49AB25C: typed_rb_min (typerb.c:495)
==652336== by 0x4943B54: vertices_const_first (link_state.h:424)
==652336== by 0x493DCE4: vertices_first (link_state.h:424)
==652336== by 0x493DADC: ls_ted_del_all (link_state.c:1010)
==652336== by 0x47E77B: isis_instance_mpls_te_destroy (isis_nb_config.c:1871)
==652336== by 0x495BE20: nb_callback_destroy (northbound.c:1131)
==652336== by 0x495B5AC: nb_callback_configuration (northbound.c:1356)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== Address 0x6f928e0 is 272 bytes inside a block of size 320 free'd
==652336== at 0x48399AB: free (vg_replace_malloc.c:538)
==652336== by 0x494BA30: qfree (memory.c:141)
==652336== by 0x493D99D: ls_ted_del (link_state.c:997)
==652336== by 0x493DC20: ls_ted_del_all (link_state.c:1018)
==652336== by 0x47E77B: isis_instance_mpls_te_destroy (isis_nb_config.c:1871)
==652336== by 0x495BE20: nb_callback_destroy (northbound.c:1131)
==652336== by 0x495B5AC: nb_callback_configuration (northbound.c:1356)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== Block was alloc'd at
==652336== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==652336== by 0x494B6F8: qcalloc (memory.c:116)
==652336== by 0x493D7D2: ls_ted_new (link_state.c:967)
==652336== by 0x47E4DD: isis_instance_mpls_te_create (isis_nb_config.c:1832)
==652336== by 0x495BB29: nb_callback_create (northbound.c:1034)
==652336== by 0x495B547: nb_callback_configuration (northbound.c:1348)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== by 0x495D23E: nb_cli_apply_changes (northbound_cli.c:268)
Let's null out the pointer. After this change. Valgrind no longer reports issues
and isisd no longer crashes.
Fixes: #10939
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
That commit aim is to fix an invalid behavior when
default-information is activated on ospf router without always option.
Consider an ASBR with:
-one default route coming from ospf,
-and another default route coming from another deaemon (such BGP or static).
When the daemon bgp stops advertising its default route,
-ospf continues to advertise its previous default route (with aging 0),
-this may create default routing loops.
Expected behavior: is to update the removed external default route with
MAXAGING value.
Updating with MAXAGING value will notify the fact the route is currently
invalid. A later removal from ospf external LSA database will be made.
Analysis: all default routes have their type overwritten by a
DEFAULT_ROUTE type. Thus all default routes whatever its origin (ospf,
bgp, static...) is treated in a same way. But this is not pertinent for
ospf originated default routes.
Fix: avoid overwiting of route type when default route is ospf type.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The following configuration:
router ospf
segment-routing global-block 16000 23999 local-block 1000 2000
!
appears in the 'show running-config' like below:
router ospf
local-block 1000 2000
!
When there are custom Adjacencies, display the SRGB even if SRGB
has the default settings.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no need to have an interface available to configure
SRGB. Conversely, it should be possible to remove the SRGB
when no interfaces are available.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
At the moment it's inconsistent, and very annoying. Let's just fix this, and
add a deprecation period to remove them after that.
```
vr_ib# show ip ospf neighbor json
{
"neighbors":{
"192.10.120.2":[
{
"priority":1,
"state":"Full\/DROther",
"deadTimeMsecs":36543,
"address":"192.10.120.2",
"ifaceName":"VLINK0",
"retransmitCounter":0,
"requestCounter":0,
"dbSummaryCounter":0
},
```
```
vr_ib# show ip ospf neighbor detail json
{
"neighbors":{
"192.10.120.2":[
{
"ifaceAddress":"192.10.120.2",
"areaId":"0.0.0.0",
"ifaceName":"VLINK0",
"nbrPriority":1,
"nbrState":"Full",
"stateChangeCounter":5,
"lastPrgrsvChangeMsec":53367612,
"routerDesignatedId":"0.0.0.0",
"routerDesignatedBackupId":"0.0.0.0",
"optionsCounter":66,
"optionsList":"*|O|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":33126,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on",
"grHelperStatus":"None"
},
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Description:
Default route is not getting flushed from neighbours though originator
triggered flush and deleted LSA from its database. It become as stale
LSA in neighbours databse forever. This could seen in the following
sequence of configurations with less than a second interval b/w configs.
And this could happen only when originator shouldnt have default route
in its rib so it originates default route only when configure with 'always'
option.
step-1:default-information originate always
step-2:no default-information originate always
step-3:default-information originate
In step-1, default route will be originated to AS.
In step-2, default route will be flushed to AS, but neighbours will be
discarding this update due to minlsainterval condition.
And it is expected that DUT need to keep send this update
until it receives the ack from neighbours by adding each
neighbour's retransmission list.
In Step-3: It is deleting the lsas from nbr's retransmission list
by assuming it initiated the flush. This is cuasing to not
send the lsa update anymore to neighbours which makes
stale lsa in nbrs forever.
Fix:
Allowed to delete the lsa from retransmission list only when lsa is
not in maxage during flushing procedure.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
before:
```
r1# show ip ospf vrf blue
% OSPF instance not found
r1# show ip ospf vrf default
% OSPF instance not found
r1# show ip ospf
% OSPF instance not found
```
after:
```
r1# show ip ospf vrf blue
% OSPF is not enabled in vrf blue
r1# show ip ospf vrf default
% OSPF is not enabled in vrf default
r1# show ip ospf
% OSPF is not enabled in vrf default
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Description:
NULL pointer wrongly passed instead of 'ei' pointer to
ospf_external_lsa_originate() API in opaque capability enable/disable
which always make it to fail in origination.
Corrected it by passing actual ei pointer.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Skip marking routes as changed in ospf_if_down if there's now
new_table present, which might be the case when the instance is
being finished
The backtrace for the core was:
raise (sig=sig@entry=11) at ../sysdeps/unix/sysv/linux/raise.c:50
core_handler (signo=11, siginfo=0x7fffffffe170, context=<optimized out>) at lib/sigevent.c:262
<signal handler called>
route_top (table=0x0) at lib/table.c:401
ospf_if_down (oi=oi@entry=0x555555999090) at ospfd/ospf_interface.c:849
ospf_if_free (oi=0x555555999090) at ospfd/ospf_interface.c:339
ospf_finish_final (ospf=0x55555599c830) at ospfd/ospfd.c:749
ospf_deferred_shutdown_finish (ospf=0x55555599c830) at ospfd/ospfd.c:578
ospf_deferred_shutdown_check (ospf=<optimized out>) at ospfd/ospfd.c:627
ospf_finish (ospf=<optimized out>) at ospfd/ospfd.c:683
ospf_terminate () at ospfd/ospfd.c:653
sigint () at ospfd/ospf_main.c:109
quagga_sigevent_process () at lib/sigevent.c:130
thread_fetch (m=m@entry=0x5555556e45e0, fetch=fetch@entry=0x7fffffffe9b0) at lib/thread.c:1709
frr_run (master=0x5555556e45e0) at lib/libfrr.c:1174
main (argc=9, argv=0x7fffffffecb8) at ospfd/ospf_main.c:254
Signed-off-by: Tomi Salminen <tsalminen@forcepoint.com>
if r1 has a route received from a neighbor with the default administrative
distance configured
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:41
if we change the administrative distance
r1(config)# router ospf
r1(config-router)# distance 50
this is not applied as there are no changes in the routing table
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:13
This commit will force the update of the routing table with the new configured distance
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [50/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:14
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
FRR stores the route_tag in network byte order. Bug filed indicates
that the `show ip ospf route` command shows the correct value.
Every place route_tag is dumped in ospf_vty.c the ntohl function
is used first.
Fixes: #10450
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Two minor fixes:
- remove redundant "(a.b.c.d/m)" in "prefix" description
- remove some annoying space in "summary-address" and "tag"
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Currently "range" command can only accept `cost` or `substitute`
individually, and `show running` will mix them.
So need make it accept mixed form with both of them, otherwise
configuration file in mixed form will fail to start.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
This LSID alogithm added as per rcf2328 Appendex-E recommendation.
This applies only for AS-external lsas and summary lsas.
As an example of the algorithm, consider its operation when the
following sequence of events occurs in a single router (Router A).
(1) Router A wants to originate an AS-external-LSA for
[10.0.0.0,255.255.255.0]:
(a) A Link State ID of 10.0.0.0 is used.
(2) Router A then wants to originate an AS-external-LSA for
[10.0.0.0,255.255.0.0]:
(a) The LSA for [10.0.0,0,255.255.255.0] is reoriginated using a
new Link State ID of 10.0.0.255.
(b) A Link State ID of 10.0.0.0 is used for
[10.0.0.0,255.255.0.0].
(3) Router A then wants to originate an AS-external-LSA for
[10.0.0.0,255.0.0.0]:
(a) The LSA for [10.0.0.0,255.255.0.0] is reoriginated using a
new Link State ID of 10.0.255.255.
(b) A Link State ID of 10.0.0.0 is used for
[10.0.0.0,255.0.0.0].
(c) The network [10.0.0.0,255.255.255.0] keeps its Link State ID
of 10.0.0.255.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
The ospf instance code is not properly handling the default route
when using default-information originate. This is because
the code is looking for the default route to be saved with an
instance of <ospf instance id> but we always save it as a instance
id of 0. In fact OSPF asks zebra for the default route as a special
case in instance 0, always.
Here is the correct behavior:
eva# show ip ospf data
OSPF Instance: 3
OSPF Router with ID (192.168.122.1)
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
0.0.0.0 192.168.122.1 8 0x80000001 0xdb08 E2 0.0.0.0/0 [0x0]
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp39s0, 00:02:03
Fixes: #10251
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Update ospfd and ospf6d to send opaque route attributes to
zebra. Those attributes are stored in the RIB and can be viewed
using the "show ip[v6] route" commands (other than that, they are
completely ignored by zebra).
Example:
```
debian# show ip route 192.168.1.0/24
Routing entry for 192.168.1.0/24
Known via "ospf", distance 110, metric 20, best
Last update 01:57:08 ago
* 10.0.1.2, via eth-rt2, weight 1
OSPF path type : External-2
OSPF tag : 0
debian#
debian# show ip route 192.168.1.0/24 json
{
"192.168.1.0\/24":[
{
"prefix":"192.168.1.0\/24",
"prefixLen":24,
"protocol":"ospf",
"vrfId":0,
"vrfName":"default",
"selected":true,
[snip]
"ospfPathType":"External-2",
"ospfTag":"0"
}
]
}
```
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Comparison of the two pointer is confusing, they have no relevance
except the time both of them are empty.
Additionly modify one variable name and correct some comment words, they
are same in both ospfd and ospf6d.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When the summary-address is deleted, `ospf_aggr_handle_external_info` is
called for each aggregated route for the cleanup. It needs to find the
corresponding OSPF instance and it does it using the `ei->instance`
which is totally wrong, because it's the instance from which the route
is redistributed, not the local OSPF instance. A pointer to the correct
OSPF instance is already stored in the external_info structure.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
An OSPF ABR, while in the process of announcing summary LSAs,
checks whether it's connected to the backbone area. If not, then
all summary LSAs are invalidated and not announced (or flushed)
while the missing backbone connectivity persists.
The backbone connectivity check consists of assessing whether
there's at least one fully formed adjacency in the backbone area. The
problem is that this check can fail unexpectedly if the router is
acting as a helper for a neighbor that is performing a graceful
restart. This is because there's a short interim of time in which
that neighbor's state will oscillate between ExStart and Full during
the LSDB synchronization process.
To address that issue, update ospf_act_bb_connection() to consider
neighbors performing a graceful restart as if they were fully
adjacent (which is what a GR helper should do).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This commit fixes a rather obscure bug that was causing the GR
topotest to fail on a frequent basis.
RFC 3623 specifies that a router acting as a helper to a restarting
neighbor should monitor topology changes and abort the GR procedures
when one is detected, falling back to normal OSPF operation.
ospfd uses the ospf_lsa_different() function to detect when the
content of an LSA has changed, which is considered as a topology
change. The problem is that ospf_lsa_different() can return true
even when the two LSAs passed as parameters are identical, provided
one LSA has the OSPF_LSA_RECEIVED flag set and the other not.
In the context of the ospf_gr_topo1 test, router rt6 performs
a graceful restart and a few seconds later acts as a helper for
router rt7. When it's acting as a helper for rt7, it still didn't
translate its NSSA Type-7 LSAs, something that happens only after 7
seconds (OSPF_ABR_TASK_DELAY) of the first SPF run. The translated
Type-5 LSAs on its LSDB were learned from the helping neighbors
(rt3 and rt7). It's then possible that the NSSA Type-7 LSAs might
be translated while rt6 is acting as helper for rt7, which causes
the daemon to detect a non-existent topology change only because
the OSPF_LSA_RECEIVED flag is unset in the recently originated
Type-5 LSA.
Fix this problem by ignoring the OSPF_LSA_RECEIVED flag when
comparing LSAs for the purpose of topology change detection.
In short, the bug would only show up when the restarting router
would start acting as a helper immediately after coming back up
(which would be hard to happen in the real world). The topotest
failures became more frequent after commit 6255aad0bc because of
the removal of the 'sleep' calls, which used to give ospfd more time
to converge before start acting as a helper for other routers. The
problem still occurred from time to time though.
Fixes#9983.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
When changing the area from normal to NSSA, previous area's
ASBR router's type-5 also calculated and added to routing table along
with Type-7 lsas.
Made a change in route calculation such that it will not consider Type-5
lsas in calculation if it is originated from NSSA ASBR router.
These lsas will be age out at MAX age.
log:
frr(config-router)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/0] via 10.112.157.253, ens160, 00:32:47
C>* 10.112.156.0/23 is directly connected, ens160, 00:32:47
S>* 22.22.22.2/32 [1/0] is directly connected, ens192, weight 1, 00:20:03
O>* 33.33.33.0/24 [110/20] via 100.1.1.220, ens192, weight 1, 00:08:55
via 100.1.1.220, ens192, weight 1, 00:08:55
O 100.1.1.0/24 [110/10] is directly connected, ens192, weight 1, 00:21:32
C>* 100.1.1.0/24 is directly connected, ens192, 00:23:11
frr(config-router)# do show ip ospf route
============ OSPF network routing table ============
N 100.1.1.0/24 [10] area: 0.0.0.1
directly attached to ens192
============ OSPF router routing table =============
R 2.2.2.2 [10] area: 0.0.0.1, ASBR
via 100.1.1.220, ens192
============ OSPF external routing table ===========
N E2 33.33.33.0/24 [10/20] tag: 0
via 100.1.1.220, ens192
via 100.1.1.220, ens192
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
We should always treat the VRF interface as a loopback. Currently, this
is not the case, because in some old pre-VRF code we use if_is_loopback
instead of if_is_loopback_or_vrf. To avoid any future problems, the
proposal is to rename if_is_loopback_or_vrf to if_is_loopback and use it
everywhere. if_is_loopback is renamed to if_is_loopback_exact in case
it's ever needed, but currently it's not used anywhere.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Function ospf_te_parse_te() and ospf_te_delete_te() browse TE TLV but also
subTLV. The loop that parse the subTLV check that cummulative read data doesn't
exceed the total size of the TLV. However, the sum variable that counts the
number of read data was wrongly intialize to 0 instead to 4 (i.e. the initial
TLV Header size that is located at the TOP of subTLV).
This patch adjust accordingly the initial value of the counter.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The no-form should use the same arguments as the regular command, hence
replace "period" with "grace-period".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Running ospf_topo_vrf1 leads us to this valgrind issue:
==2386518== Invalid read of size 8
==2386518== at 0x4971520: route_top (table.c:401)
==2386518== by 0x181F08: ospf_interface_bfd_apply (ospf_bfd.c:126)
==2386518== by 0x182069: ospf_interface_disable_bfd (ospf_bfd.c:158)
==2386518== by 0x18BF51: ospf_del_if_params (ospf_interface.c:557)
==2386518== by 0x18C584: ospf_if_delete_hook (ospf_interface.c:712)
==2386518== by 0x490CA0B: hook_call_if_del (if.c:61)
==2386518== by 0x490D1F3: if_delete_retain (if.c:286)
==2386518== by 0x490D337: if_delete (if.c:309)
==2386518== by 0x490CDED: if_destroy_via_zapi (if.c:200)
==2386518== by 0x49940A9: zclient_interface_delete (zclient.c:2237)
==2386518== by 0x4998062: zclient_read (zclient.c:3969)
==2386518== by 0x4979529: thread_call (thread.c:1908)
==2386518== by 0x4919918: frr_run (libfrr.c:1164)
==2386518== by 0x181AC7: main (ospf_main.c:235)
==2386518== Address 0x5df39a0 is 0 bytes inside a block of size 56 free'd
==2386518== at 0x48399AB: free (vg_replace_malloc.c:538)
==2386518== by 0x492A03E: qfree (memory.c:141)
==2386518== by 0x4970C6F: route_table_free (table.c:141)
==2386518== by 0x4970A36: route_table_finish (table.c:61)
==2386518== by 0x18C543: ospf_if_delete_hook (ospf_interface.c:708)
==2386518== by 0x490CA0B: hook_call_if_del (if.c:61)
==2386518== by 0x490D1F3: if_delete_retain (if.c:286)
==2386518== by 0x490D337: if_delete (if.c:309)
==2386518== by 0x490CDED: if_destroy_via_zapi (if.c:200)
==2386518== by 0x49940A9: zclient_interface_delete (zclient.c:2237)
==2386518== by 0x4998062: zclient_read (zclient.c:3969)
==2386518== by 0x4979529: thread_call (thread.c:1908)
==2386518== by 0x4919918: frr_run (libfrr.c:1164)
==2386518== by 0x181AC7: main (ospf_main.c:235)
==2386518== Block was alloc'd at
==2386518== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==2386518== by 0x4929EFC: qcalloc (memory.c:116)
==2386518== by 0x49709F8: route_table_init_with_delegate (table.c:53)
==2386518== by 0x49717F4: route_table_init (table.c:528)
==2386518== by 0x18C328: ospf_if_new_hook (ospf_interface.c:659)
==2386518== by 0x490C97D: hook_call_if_add (if.c:60)
==2386518== by 0x490CE85: if_create_name (if.c:223)
==2386518== by 0x490DF32: if_get_by_name (if.c:622)
==2386518== by 0x4993F73: zclient_interface_add (zclient.c:2186)
==2386518== by 0x4998062: zclient_read (zclient.c:3969)
==2386518== by 0x4979529: thread_call (thread.c:1908)
==2386518== by 0x4919918: frr_run (libfrr.c:1164)
==2386518== by 0x181AC7: main (ospf_main.c:235)
==2386518==
Fix the ordering to do the individual node tree cleanup after we delete
the data we care about.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, we automatically delete an inactive VRF when its last
interface is deleted. This code introduces a couple of crashes because
of the following problems:
- vrf_delete is called before calling if_del hook, so daemons may try to
dereference an ifp->vrf pointer which is freed
- in if_terminate, we continue to use the VRF in the loop condition
after the last interface is deleted
This check is needed only when the interface is deleted by the user,
because if the interface is deleted by the system, VRF must still exist
in the system. Move the check to appropriate places to fix crashes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Issue #9983 explains what is wrong with the GR helper mode.
To unblock the CI that fails almost all the time on the ospf_gr_topo1
test, remove the commands and disable the test. Also add a reminder to
completely remove the helper mode if no one fixes the code in a month.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
timerval datastructure is being used without initialization.
Using these uninitialized parameters can lead unexpected results
so initializing before using it.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
