The command `debug bgp allow-martian` is not actually
a debug command it's a command that when entered allows
bgp to not reset a peering when a martian nexthop is
passed in the nlri.
Add the `bgp allow-martian-nexthop` command and allow it to be
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Update the documentation with realms and how they
interact with nexthop groups that are installed into
the kernel.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
"show ip ospf neighbour [nbrid] [json]" is expected to give brief output
of the specific neighbour. But it gives the detailed output without
the detail keyword.
"show ip ospf neighbour [nbrid] [deatil] [json]" command is failed to
fetch the ecpected o/p. Corrected it.
Ex o/p:
frr(config-if)# do show ip ospf neighbor
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
8.8.8.8 1 Full/DR 17m03s 31.192s 20.1.1.194 ens192:20.1.1.220 0 0 0
30.1.1.100 1 Full/DR 56.229s 32.000s 30.1.1.100 ens224:30.1.1.220 0 0 0
frr(config-if)#
frr(config-if)#
frr(config-if)# do show ip ospf neighbor 8.8.8.8
Neighbor 8.8.8.8, interface address 20.1.1.194
In the area 0.0.0.0 via interface ens192
Neighbor priority is 1, State is Full/DR, 6 state changes
Most recent state change statistics:
Progressive change 17m18s ago
DR is 20.1.1.194, BDR is 20.1.1.220
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 35.833s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
Graceful restart Helper info:
Graceful Restart HELPER Status : None
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail
No such interface.
frr(config-if)# do show ip ospf neighbor 8.8.8.8 detail json
{}
frr(config-if)#
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Allow end operator to set how long a nexthop-group is kept around
in the system after it is no-longer being used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
With current release, forcin the source ip address when setting up a BMP
connection is not possible.
The need is to add an extra parameter for the following vty command:
router bgp 65500
bmp targets AAA
bmp connect 2.2.2.2 port 666 min-retry 100 max-retry 700
bmp connect 2:2::2:2 port 666 min-retry 100 max-retry 700 [source-interface lo1]
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Allow the end operator to match `match peer <PEERGROUPNAME>`
in a route-map. If the end operator defines interface
based peers and peer-groups that have names that overlap
the interface based peer will match first.
Fixes: #11316
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Seems replacement is not working when referenced, only when used directly
in the text |PACKAGE_URL|.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Allow BGP to control the TOS DSCP value in the tcp header
via a new command at the bgp global level `bgp session-dscp <0-63>`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Pavel Shirhov <pavelsh@microsoft.com>
The `bgp no-rib` command cycles through all the bgp rib tables
and removes them from zebra. Modify the code so that FRR notices
that it is attempting to cycle through the safi's that are two level
tables. In addition these safi's cannot just blindly remove the routes
from the rib as that there are none explicitly.
This code just prevents the crash in bgpd. It does not properly cycle
through and remove the zebra changes made that are explicit to these afi's.
This should be handled as appropriate by the developers on these safi's when
it becomes important to them.
Fixes: #11178
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
N-bit flag should be exchanged in BGP OPEN messages, not only when the
bgpd is restarted/started.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
By changing this API call to use a `struct ipaddr`, which encodes the
type of IP address with it. (And rename/remove the `IPV4` from the
command name.)
Also add a comment explaining that this function call is going to be
obsolete in the long run since pimd needs to move to proper MRIB NHT.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This has already been a requirement for Solaris, it is still a
requirement for some of the autoconf feature checks to work correctly,
and it will be a requirement for `-fms-extensions`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- Create frr docker container based in new Red Hat Universal Base
Images.
- This build a docker container based in ubi-8.
- Need to get the devel packages from centos-8 stream repos.
- Centos-8 stream repos added : base, appstream, powertools and epel
Signed-off-by: Javier Garcia <javier.martin.garcia@ibm.com>
Config for -
1. Preventing fragmentation via user configured EAD RTs
2. Limiting the number of EVIs per-fragment if EAD fragmentation is needed
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
For some reason I couldn't think of the word "container" back when I
wrote most of this. It is the proper term most developers wil
understand correctly, so let's use it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RB-tree and double-linked-list easily support backwards iteration, and
an use case seems to have popped up. Let's make it accessible.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
