When a route imported from l3vpn is analysed, the nexthop from default
VRF is looked up against a valid MPLS path. Generally, this is done on
backbones with a MPLS signalisation transport layer like LDP. Generally,
the BGP connection is multiple hops away. That scenario is already
working.
There is case where it is possible to run L3VPN over GRE interfaces, and
where there is no LSP path over that GRE interface: GRE is just here to
tunnel MPLS traffic. On that case, the nexthop given in the path does not
have MPLS path, but should be authorized to convey MPLS traffic provided
that the user permits it via a configuration command.
That commit introduces a new command that can be activated in route-map:
> set l3vpn next-hop encapsulation gre
That command authorizes the nexthop tracking engine to accept paths that
o have a GRE interface as output, independently of the presence of an LSP
path or not.
A configuration example is given below. When bgp incoming vpnv4 updates
are received, the nexthop of NLRI is 192.168.0.2. Based on nexthop
tracking service from zebra, BGP knows that the output interface to reach
192.168.0.2 is r1-gre0. Because that interface is not MPLS based, but is
a GRE tunnel, then the update will be using that nexthop to be installed.
interface r1-gre0
ip address 192.168.0.1/24
exit
router bgp 65500
bgp router-id 1.1.1.1
neighbor 192.168.0.2 remote-as 65500
!
address-family ipv4 unicast
no neighbor 192.168.0.2 activate
exit-address-family
!
address-family ipv4 vpn
neighbor 192.168.0.2 activate
neighbor 192.168.0.2 route-map rmap in
exit-address-family
exit
!
router bgp 65500 vrf vrf1
bgp router-id 1.1.1.1
no bgp network import-check
!
address-family ipv4 unicast
network 10.201.0.0/24
redistribute connected
label vpn export 101
rd vpn export 444:1
rt vpn both 52:100
export vpn
import vpn
exit-address-family
exit
!
route-map rmap permit 1
set l3vpn next-hop encapsulation gre
exit
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add an ability to match via route-maps. An additional route-map command
`match rpki-extcommunity <invalid|notfound|valid>` added.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
For IPv4 matching, we have "match ip next-hop address A.B.C.D".
For IPv6 matching, we have "match ipv6 next-hop X:X::X:X".
To have consistency, let's add "address" keyword to IPv6 commands.
Old commands are preserved as hidden for backward compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
FRR uses bgp_route_match_add and checked the return
code in every place but one. Fix so that the
return code is looked at and warned against
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Coverity found a couple of spots where FRR was
ignoring the return code of generic_set_add.
Just follow the code pattern for the rest of
the usage in the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Will be handy to filter BGP prefixes by using BGP community alias
instead of numerical community values.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
- Add following set clause for route-maps
"set evpn gateway-ip <ipv4|ipv6 >A.B.C.D|X:X::X:X"
- When this route-map is applied as outboubd policy in BGP, it will set the
gateway-ip in BGP attribute For EVPN type-5 routes.
Example configuration:
route-map RMAP-EVPN_GWIP permit 5
set evpn gateway-ip ipv4 50.0.2.12
set evpn gateway-ip ipv6 50:0:2::12
router bgp 101
bgp router-id 10.100.0.1
neighbor 10.0.1.2 remote-as 102
!
address-family l2vpn evpn
neighbor 10.0.1.2 activate
neighbor 10.0.1.2 route-map RMAP-EVPN_GWIP out
advertise-all-vni
exit-address-family
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
`config.h` has all the defines from autoconf, which may include things
that switch behavior of other included headers (e.g. _GNU_SOURCE
enabling prototypes for additional functions.)
So, the first include in any `.c` file must be either `config.h` (with
the appropriate guard) or `zebra.h` (which includes `config.h` first
thing.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This commit introduces the implementation for the north-bound
callbacks for the bgp-specific route-map match and set clauses.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
