We are allocating temporary memory for information about
what to process in this thread, which is not being cleaned
up on thread cancelling.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
==1179738== 48 (40 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 13 of 29
==1179738== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==1179738== by 0x493C8D5: qcalloc (memory.c:116)
==1179738== by 0x208F0C: ecommunity_dup (bgp_ecommunity.c:267)
==1179738== by 0x2B300C: conf_copy (bgp_updgrp.c:170)
==1179738== by 0x2B35BF: peer2_updgrp_copy (bgp_updgrp.c:277)
==1179738== by 0x2B5189: update_group_find (bgp_updgrp.c:826)
==1179738== by 0x2B70D0: update_group_adjust_peer (bgp_updgrp.c:1769)
==1179738== by 0x23DB7D: update_group_adjust_peer_afs (bgp_updgrp.h:519)
==1179738== by 0x243B21: bgp_establish (bgp_fsm.c:2129)
==1179738== by 0x244B94: bgp_event_update (bgp_fsm.c:2597)
==1179738== by 0x26B0E6: bgp_process_packet (bgp_packet.c:2895)
==1179738== by 0x498F5FD: thread_call (thread.c:2008)
==1179738== by 0x49253DA: frr_run (libfrr.c:1198)
==1179738== by 0x1EEC38: main (bgp_main.c:520)
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP SoO is a tag that is appended on BGP updates to allow a peer to mark
a particular peer as belonging to a particular site. In certain MPLS L3 VPN
configurations, the BGP AS-Path may not provide the granularity needed
prevent a loop in the control-plane. With this in mind, BGP SoO is designed
to fill this gap and prevent a routing loop that may occur.
If we configure for example, `neighbor soo 65000:1` at PEs, routes won't be
announced between CPEs if soo matches. This is especially needed when using
as-override or allowas-in.
Also, this is the automated way of the same behavior as configuring route-maps
for each peer like:
```
bgp extcommunity-list cpe permit soo 65000:1
!
route-map cpe permit 10
set extcommunity soo 65000:1
...
route-map cpe deny 10
match extcommunity cpe
route-map cpe permit 20
...
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
convert:
frr_with_mutex(..)
to:
frr_with_mutex (..)
To make all our code agree with what clang-format is going to produce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
Originally commit: 8761cd6ddb
implemented the ability for LL nexthop tracking to be
interface based. During some more testing the code
to make the interface event happen was noticed to
not properly run in some cases. This was because
it was originally assumed that the connect could
not succeed. Testing has shown that the connect
can succeed and FRR needs to handle the nht tracking
in this case too.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If we receive CEASE Notification or HOLDTIME notification, retain STALE
routes if it's not a CEASE/Hard Reset.
When doing `clear ip bgp PEER`, we can control if this would be CEASE/Hard Reset
or not by using `bgp hard-administrative-reset` knob.
When `bgp graceful-restart notification` is disabled, STALE routes won't be
retained when receiving Notification message.
Co-authored-by: Biswajit Sadhu <biswajit.sadhu@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When the connection goes up, the timer is not stopped and if we have a
subsequent GR event we have an old timer which is not as we expect.
Before:
```
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 95
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 08:27:53 2022
Time until Long-lived stale route deleted: 23 <<<<<<<<<<<<
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 103
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.0.1
65001 47583
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Last update: Mon Mar 28 08:43:29 2022
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 103
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 08:43:30 2022
Time until Long-lived stale route deleted: 17 <<<<<<<<<<<<<<<
```
After:
```
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 79
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (0.0.0.0)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 09:05:18 2022
Time until Long-lived stale route deleted: 24 <<<<<<<<<<<<<<<
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 87
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.0.1
65001 47583
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Last update: Mon Mar 28 09:05:25 2022
spine1-debian-11# sh ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32, version 87
Paths: (1 available, best #1, table default, mark routes to be retained for a longer time. Requires support for Long-lived BGP Graceful Restart)
Not advertised to any peer
65001 47583, (stale)
192.168.0.1 from 192.168.0.1 (100.100.200.100)
Origin incomplete, valid, external, best (First path received)
Community: llgr-stale
Last update: Mon Mar 28 09:05:29 2022
Time until Long-lived stale route deleted: 29 <<<<<<<<<<<<<<
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Used for graceful-restart mostly.
Especially for bgp_show_neighbor_graceful_restart_capability_per_afi_safi()
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
BGP can experience a bunch of errors associated with sockets
being manipulated which would prevent the peer from coming up.
Let's add some additional debug information here so that
our operators can do a bit more for themselves.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When BGP is notified by RIB that peer address is unreachable then BGP session must be brought
down immediately and not wait for the hold-timer expiry. Today single-hop EBGP already behaves
this way but need to change for iBGP and multi-hop EBGP sessions.
Signed-off-by: Prerana G.B <prerana@vmware.com>, Pushpasis Sarkar <spushpasis@vmware.com>
Currently, the following sequence of events between peers could
result in erroneous capability reports on the peer
with enabled dont-capability-negotiate option:
- having some of the capabilities advertised to a bgp neighbor,
- then disabling capability negotiation to that neighbor,
- then resetting connection to it,
- and no capabilities are actually sent to the neighbor,
- but "show bgp neighbors" on the host still displays them
as advertised to the neighbor.
There are two possibilities for establishing a new connection
- the established connection was initiated by us with bgp_start(),
- the connection was initiated on the neighbor side and processed by
us via bgp_accept() in bgp_network.c.
The former case results in "show bgp neighbors" displaying only
"received" in capabilities, as the peer's cap is initiated to zero
in bgp_start().
In the latter case, if bgp_accept() happens before bgp_start()
is called, then new peer capabilities are being transferred
from its previous record before being zeroed in bgp_start().
This results in "show bgp neighbors" still displaying
"advertised and received" in capabilities.
Following the logic of a similar af_cap field clearing,
treated correctly in both cases, we
- reset peer's capability during bgp_stop()
- don't pass it over to a new peer structure in bgp_accept().
This fix prevents transferring of the previous capabilities record
to a new peer instance in arbitrary reconnect scenario.
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Some BGP updates received by BGP invite local router to
install a route through itself. The system will not do it, and
the route should be considered as not valid at the earliest.
This case is detected on the zebra, and this detection prevents
from trying to install this route to the local system. However,
the nexthop tracking mechanism is called, and acts as if the route
was valid, which is not the case.
By detecting in BGP that use case, we avoid installing the invalid
routes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Problem: Sometimes the configured Local GR state is not reflected in
show command and peer node. This is causing failures in few of the
BGP-GR topotests.
RCA: This problem is seen when the configuration of local GR state
happens when the BGP session is in OpenSent state and moves to
Established after the configuration is complete.
When the session gets established, we move the GR state value from stub peer
to the config peer. This will result in overriding the GR state to
previous value.
Fix: The local GR state is modified only through CLI configuration and
does not change during BGP FSM transition. In this case it is not necessary
to transfer the GR state value from stub peer to config peer. This way we
can ensure that always the most recent config value is present in peer
datastructure.
Signed-off-by: Prerana-GB <prerana@vmware.com>
New peers should be initialized with a usual max packet size and later
determined on OPEN messages.
Testing with different peers supporting/not supporting extended support.
2021/07/02 13:48:00 BGP: [WEV7K-2GAQ5] u2:s2 send UPDATE len 8991 (max message len: 65535) numpfx 1788
2021/07/02 13:48:03 BGP: [WEV7K-2GAQ5] u3:s3 send UPDATE len 4096 (max message len: 4096) numpfx 809
2021/07/02 13:48:03 BGP: [WEV7K-2GAQ5] u3:s3 send UPDATE len 4096 (max message len: 4096) numpfx 809
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If we have a situation where BGP is partially reading in a config
file for a neighbor, *and* the neighbor is coming up *and* we
have a doppelganger. There exists a race condition when we transfer
the config from the doppelganger to the config peer that we will
overwrite later config because we are copying the config data
from the doppelganger peer( which was captured at the start of initiation
of the peering ).
From what I can tell the peer->af_flags variable is to hold configuration
flags for the local peer. The doppelganger should never overwrite this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new LL code in:
8761cd6ddb
Introduced the idea of the bgp unnumbered peers using interface up/down
events to track the bgp peers nexthop. This code was not properly
working when a connection was received from a peer in some circumstances.
Effectively the connection from a peer was immediately skipping state transitions
and FRR was never properly tracking the peers nexthop. When we receive the
connection attempt, let's track the nexthop now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Remove old BFD API usage and replace it with the new one.
Highlights:
- More shared code: the daemon gets notified with callbacks instead of
having to roll its own code to find the notified sessions.
- Less code to integrate with BFD.
- Remove hidden commands to configure single / multi hop. Use
protocol data instead.
BGP can determine if a peer is single/multi hop according to the
following criteria:
a. If the IP address is a link-local address (single hop)
b. The network is shared with peer (single hop)
c. BGP is configured for eBGP multi hop / TTL security (multi hop)
- Respect the configuration hierarchy:
a. Peer configuration take precendence over peer-group
configuration.
b. When peer group configuration is removed, reset peer
BFD configurations to defaults (unless peer had specific
configs).
Example:
neighbor foo peer-group
neighbor foo bfd profile X
neighbor 192.168.0.2 peer-group foo
neighbor 192.168.0.2 bfd
! If peer-group is removed the profile configuration gets
! removed from peer 192.168.0.2, but BFD will still enabled
! because of the neighbor specific bfd configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
