EVPN is only enabled when user configures advertise-all-vni.
All VNIs (L2 and L3) should be cleared upon removal of this config.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When we receive an MP_UNREACH,
we try to uninstall routes from the VRF and the VNI.
The route-node in the VRF corresponds
to the ip prefix formed from EVPN prefix.
We should correctly form the prefix based on the EVPN route-type.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
for EVPN routes prefixlen filed in struct prefix
represents the sizeof of the struct rather than the actual prefix len.
This is later used in looking up route node in RIB.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
CLI config for enabling/disabling type-5 routes
router bgp <as> vrf <vrf>
address-family l2vpn evpn
[no] advertise <ipv4|ipv6|both>
loop through all the routes in VRF instance and advertise/withdraw
all ip routes as type-5 routes in default instance.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For EVPN type-5 route the NH in the NLRI is set to the local tunnel ip.
This information has to be obtained from kernel notification.
We need to pass this info from zebra to bgp in l3vni call flow.
This patch doesn't handle the tunnel-ip change.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. VRF RD can be auto-derived (simillar to RD for a VNI)
2. VRF RD can be configured manually through a config
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
currently, we have a rd_id bitfield
to assign an unique index for auto RD.
This bitfield currently resides under struct bgp which seems wrong.
We need to shift this to a global space
as this ID space is really global per box.
One more reason to keep it at a global data structure is,
the ID space could be used by both VNIs and VRFs.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
BGP VRF can be created/deleted either via config or via l3vni add/del.
We need to handle various sequences.
1. If user config is presented, an l3vni del should not delete the vrf instance
2. do not write bgp config in show running for auto created vrf
2. If l3vni present, disallow the cli for deleting bgp vrf instance
3. If l3vni is added and vrf config is present set the flags properly
4. if bgp vrf is configured unset the AUTO flag
Ticket: CM-18630
Review: CCR-6906
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Currently, kernel doesn't support ipv6 routes with ipv4 nexthops.
To avoid the crash,
we will only attach l3-vni related
RTs/ecommunities only to ipv4 host routes.
Ticket: CM-18743
Review: ccr-6912
Testing: Manaul
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ignore the return value of some functions in the places we know they
can't fail, and other small fixes.
Regarding the change in bgpd/rfapi/rfapi_rib.c, asserting that
rfapiRaddr2Qprefix() didn't fail is the common idiom inside the rfapi
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When unsupported EVPN route types are are received / displayed with a
show command we print an uninitialized stack buffer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With the change to allow bgp_evpn.c to support 2,3 and 5 evpn routes
the output of the route type is being done by bgp_evpn_encode_prefix
instead of the individual route encoder functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
When the MAC changes for a local neighbor, ensure that the neighbor data
structure as well as the link between the neighbor and MAC data structures
is updated correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17565
Reviewed By: CCR-6605
Testing Done: Manual, evpn-smoke
There are two parts to this commit:
1. create a database of self tunnel-ip for used in martian nexthop check
In a CLAG setup, the tunnel-ip (VNI UP) notification comes before the clag-anycast-ip comes up in the system.
This was causing our self next hop check to fail and we were instaling routes with martian nexthop in zebra.
We need to keep this info in a seperate database for all local tunnel-ip.
This database will be used in parallel with the self next hop database to martian nexthop checks.
2. When a local VNI comes up, update the tunnel-ip database and filter routes in the RD table if necessary
In case of EVPN we might receive routes from clag peer before the clag-anycast ip and VNI is up on the system.
We will store the routes in the RD table for later processing.
When VNI comes UP, we loop thorugh all the routes and install them in zebra if required.
However, we were missing the martian nexthop check in this code path.
From now onwards, when a VNI comes UP,
we will first update the tunnel-ip database
We then loop through all the routes in RD table and apply martian next hop filter if required.
Things not covered in this commit but are required:
This processing is needed in general when an address becomes a connected address.
We need to loop through all the routes in BGP and apply martian nexthop filter if necessary.
This will be taken care in a seperate bug
Ticket:CM-17271/CM-16911
Reviewed By: ccr-6542
Testing Done: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Test cases create fake bgp structure that is passed to
cleanup. The new evpn code assumed ( and probably rightly so)
that if the bgp structure was created it actually initialized
all useful data structures. Just make the evpn cleanup
functions be smart about attempting to free memory never
allocated.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the BGP router-id changes, EVPN routes need to be processed due
to potential change to their RD.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement support for sticky (static) MACs. This includes the following:
- Recognize MAC is static (using NUD_NOARP flag) and inform BGP
- Construct MAC mobility extended community for sticky MACs as per
RFC 7432 section 15.2
- Inform to zebra that remote MAC is sticky, where appropriate
- Install sticky MACs into the kernel with the right flag
- Appropriate handling in route selection
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Core EVPN route handling functionality. This includes support for the
following:
- interface with zebra to learn about local VNIs and MACIPs as well as
to install remote VTEPs (per VNI) and remote MACIPs
- create/update/delete EVPN type-2 and type-3 routes
- attribute creation, route selection and install
- route handling per VNI and for the global routing table
- parsing of received EVPN routes and handling by route type
- encoding attributes for EVPN routes and EVPN prefix creation (for
Updates)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement the command 'advertise-all-vni' under the EVPN address-family
in order to allow the local system to learn about local VNIs (and MACs
and Neighbors corresponding to those VNIs) and exchange with other EVPN
speakers.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Define the EVPN (EVI) hash table and related structures and initialize
and cleanup.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
Modify EVPN prefix to use the generic IP address structure. Add support
for EVPN type-2 and type-3 prefix dump. Fix references to modified fields
as needed.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Transmission and Reception routines have a part of code that is
conditionnally compiled to the usage of HAVE_EVPN. Also, each time a
subfield of prefix evpn is reached, like in configuration also, then a
conditionnaly compilation with HAVE_EVPN is used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces the ability to make route type 5 message
when EVPN is enabled. Picked up paramters are collected from the
bgp extra attribute structure and are the ESI, the ethernet tag
information. In addition to this, nexthop attribute is collected too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces code to receive a NLRI message with route type
5, as defined in draft-ietf-bess-evpn-prefix-advertisement-02. It
It increases the number of parameters to extract from the NLRI and
to store into bgp extra information structure. Those parameters are
the ESI (ethernet segment identifier), the gateway IP Address (which
acts like nexthop attribute but is contained inside the NLRI itself)
and the ethernet tag identifier ( that acts for the VXLan Identifier)
This patch updates bgp_update() and bgp_withdraw() api, and then does the
necessary adapations for rfapi.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
