Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Just convert all uses of thread_cancel to THREAD_OFF. Additionally
use THREAD_ARG instead of t->arg to get the arguement. Individual
files should never be accessing thread private data like this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
- Rfc 8050 adds support for BGP NLRI that carry path identifiers. this commit adds that support to FRR
- Updated bgp_dump.h to include new sub-type values
- Updated bgp_dump.c to check for add_path af_caps in the peer struct.
- Updated bgp_dump.c to use the proper sub-type values upon detection of add-path af_caps
- Updated bgp_dump.c to properly dump the path_id wen present.
Signed-off-by: David Teach <dteach@routeviews.org>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Recently had a case where I was attempting to debug a nexthop tracking
issue across multiple bgp vrf's and since the setup vrf's in it with
overlapping address ranges, it became real fun real fast to track
vrf data associated. Add a bit of code to allow us to figure out
what vrf we are in when we print out debug messages.
Look through the rest of the code and find debugs where we are
not using bgp->name_pretty and switch it over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Generally available hook for plugging application-specific
code in for bgp peer change events.
This hook (peer_status_changed) replaces the previous, more
specific 'peer_established' hook with a more general-purpose one.
Also, 'bgp_dump_state' is now registered under this hook.
Signed-off-by: Marton Kun-Szabo <martonk@amazon.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The MRT dump code is already hooked in at the right places to write out
packets; the BMP code needs exactly the same access so let's make this
a hook.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
peer->ifindex was only used in two places but it was never populated so
neither of them worked as they should. 'struct peer' also has a 'struct
interface' pointer which we can use to get the ifindex.
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
thread.c fails to build properly on systems that do
not have a CLOCK_MONOTONIC. Therefore there is
no need for bgp to have knowledge of it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
