According to RFC 7166, the sequence number should be treated as an
unsigned 64-bit value, although it is stored as two 32-bit values.
When incrementing it, the code caused the lower-order 32-bit value
to skip from 0xFFFFFFFE to 0. As a side effect, an error was never
produced if the full 64-bit sequence number wrapped.
Fixes: #13805
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Problem Statement:
==================
RFC 7166 support for OSPF6 in FRR code.
RCA:
====
This feature is newly supported in FRR
Fix:
====
Core functionality implemented in previous commit is
stitched with rest of ospf6 code as part of this commit.
Risk:
=====
Low risk
Tests Executed:
===============
Have executed the combination of commands.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Problem Statement:
==================
Implement RFC 7166 support for OSPF6 in FRR code.
RCA:
====
This feature is newly supported in FRR.
Fix:
====
Changes are done to implement ospf6 ingress and egress
packet processing.
This commit has the core functionality.
It supports below debugability commands:
---------------------------------------
debug ospf6 authentication [<tx|rx>]
It supports below clear command:
--------------------------------
clear ipv6 ospf6 auth-counters interface [IFNAME]
It supports below show commands:
--------------------------------
frr# show ipv6 ospf6 interface ens192
ens192 is up, type BROADCAST
Interface ID: 5
Number of I/F scoped LSAs is 2
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
Authentication trailer is enabled with manual key ==> new info added
Packet drop Tx 0, Packet drop Rx 0 ==> drop counters
frr# show ipv6 ospf6 neighbor 2.2.2.2 detail
Neighbor 2.2.2.2%ens192
Area 1 via interface ens192 (ifindex 3)
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
Authentication header present ==> new info added
hello DBDesc LSReq LSUpd LSAck
Higher sequence no 0x0 0x0 0x0 0x0 0x0
Lower sequence no 0x242E 0x1DC4 0x1DC3 0x23CC 0x1DDA
frr# show ipv6 ospf6
OSPFv3 Routing Process (0) with Router-ID 2.2.2.2
Number of areas in this router is 1
Authentication Sequence number info ==> new info added
Higher sequence no 3, Lower sequence no 1656
Risk:
=====
Low risk
Tests Executed:
===============
Have executed the combination of commands.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>