Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The flags can be important - like "threaded" - so we need to
actually capture them when plugins are registered.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem reported by testing agency that RFC4861 section 6.2.5
states that a router should send an RA with a lifetime of 0
before ceasing to send RAs on the interface, or when the interace
is shutdown, or the router is shutdown. This fix adds that capability.
Ticket: CM-27061
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
For SR-TE we'll need to create Binding-SIDs which are essentially
LSPs that can push multiple outgoing labels. This commit sets the
groundwork for that. Luckily the netlink code didn't need to be
changed since it already supports pushing label stacks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The openfabric daemon has a longer name than anticipated for
`show zebra client summary` adjust to allow it to fit without
making columns all blomped.
Before:
robot# show zebra client summ
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
static 00:00:06 00:00:06 00:00:06 4/0 0/0
openfabric 00:00:06 00:00:06 00:00:06 0/0 0/0
After:
[sharpd@robot frr4]$ vtysh -c "show zebra client summ"
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
static 00:02:16 00:02:16 00:02:16 4/0 0/0
openfabric 00:02:16 00:02:16 00:02:16 0/0 0/0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Macvlan down event have sentinel check of its parent
link presence.
Ticket:CM-26622
Reviewed By:CCR-9326
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.
"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.
Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:
TORC11# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Local Vtep Ip: 36.0.0.11
Vxlan-Intf: vx-4001
SVI-If: vlan4001
State: Up
VNI Filter: none
System MAC: 00:02:00:00:00:2e
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000
TORC11# show vrf vni
VRF VNI VxLAN IF L3-SVI State Rmac
vrf1 4001 vx-4001 vlan4001 Up 44:38:39:ff:ff:01
TORC11# show evpn vni 4001 json
{
"vni":4001,
"type":"L3",
"localVtepIp":"36.0.0.11",
"vxlanIntf":"vx-4001",
"sviIntf":"vlan4001",
"state":"Up",
"vrf":"vrf1",
"sysMac":"00:02:00:00:00:2e",
"routerMac":"44:38:39:ff:ff:01",
"vniFilter":"none",
"l2Vnis":[
1000,
]
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Extract mac-vlan interface mac when a l3vni add is sent to bgp
Per L3VNI maintain vrr interface.
An api to extract vrr mac address from a vlan id, associated
master svi device.
When a l3vni operational up event is sent to bgpd,
extract vrr rmac along with svi rmac.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Zebra MLAG is using "t_read" for multiple tasks, such as
1. For opening Communication channel with MLAG
2. In case conncetion fails, same event is used for retries
3. after the connection establishment, same event is used to
read the data from MLAG
since all these taks will never schedule together, this will not
cause any issues.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Apparently the multipath_num functionatlity has been broken
for a while because we were ignoring the recusive nexthops
when marking them inactive based on it.
This sets them as inactive as well if the parent breaks it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were re-counting the entire group's active number on
every iteration of this nexthop_active_update() loop.
This is not great from a performance perspective but also
it was failing to properly mark things according to the
specified multipath_num.
Since a nexthop is set as active before this check, if its == to
the set ecmp, it gets marked inactive even though if its
under the max ecmp wanted!
ex)
set ecmp to 1.
`/usr/lib/frr/zebra -e 1`
All kernel routes will be marked inactive even with just one nexthop!
K 1.1.1.1/32 [0/0] is directly connected, dummy1 inactive, 00:00:10
K 1.1.1.2/32 [0/0] is directly connected, dummy2 inactive, 00:00:10
K 1.1.1.3/32 [0/0] is directly connected, dummy3 inactive, 00:00:10
K 1.1.1.4/32 [0/0] is directly connected, dummy4 inactive, 00:00:10
K 1.1.1.5/32 [0/0] is directly connected, dummy5 inactive, 00:00:10
K 1.1.1.6/32 [0/0] is directly connected, dummy6 inactive, 00:00:10
K 1.1.1.7/32 [0/0] is directly connected, dummy7 inactive, 00:00:10
K 1.1.1.8/32 [0/0] is directly connected, dummy8 inactive, 00:00:10
K 1.1.1.9/32 [0/0] is directly connected, dummy9 inactive, 00:00:10
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Clean up the relationships between zebra's rib and nexthop-group
headers as prep for adding a nexthop-group pointer to the
route_entry.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
On BSD systems null routes were not being installed into the
kernel. This is because commit 08ea27d112
introduced a bug where we were attempting to use the wrong
prefix afi types and as such we were going down the v6 code path.
test27.lab.netdef.org# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
K>* 0.0.0.0/0 [0/0] via 192.168.122.1, 00:00:23
S>* 4.5.6.8/32 [1/0] unreachable (blackhole), 00:00:11
C>* 192.168.122.0/24 [0/1] is directly connected, vtnet0, 00:00:23
test27.lab.netdef.org# exit
[ci@test27 ~/frr]$ netstat -rn
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 192.168.122.1 UGS vtnet0
4.5.6.8/32 127.0.0.1 UG1B lo0
127.0.0.1 link#2 UH lo0
192.168.122.0/24 link#1 U vtnet0
192.168.122.108 link#1 UHS lo0
Fixes: #4843
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code for when a new vrf is created to properly handle
router advertisement for it is messed up in several ways:
1) Generation of the zrouter data structure should set the rtadv
socket to -1 so that we don't accidently close someone elses
open file descriptor
2) When you created a new zvrf instance *after* bootup we are XCALLOC'ing
the data structure so the zvrf->fd was 0. The shutdown code was looking
for the >= 0 to know if the fd existed (since fd 0 is valid!)
This sequence of events would cause zebra to consume 100% of the
cpu:
Run zebra by itself ( no other programs )
ip link add vrf1 type vrf table 1003
ip link del vrf vrf1
vtysh -c "configure" -c "no interface vrf1"
This commit fixes this issue.
Fixes: #5376
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we shut down zebra, we were not doing anything to shut
down the FPM. Perform the necessary occult rituals and
stop the threads from running during early shutdown.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. add the Mlag ProtoBuf Lib to Zebra Compilation
2. Encode the messages with protobuf before writing to MLAG
3. Decode the MLAG Messages using protobuf and write to clients
based on their subscrption.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This includes:
1. Processing client Registrations for MLAG
2. storing client Interests for MLAG updates
3. Opening communication channel to MLAG with First client reg
4. Closing Communication channel with last client De-reg
5. Spawning a new thread for handling MLAG updates peocessing
6. adding Test code
7. advertising MLAG Updates to clients based on their interests
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This code is called from the zebra main pthread during shutdown
but the thread event is scheduled via the zebra dplane pthread.
Hence, we should be using the `thread_cancel_async()` API to
cancel the thread event on a different pthread.
This is only ever hit in the rare case that we still have work left
to do on the update queue during shutdown.
Found via zebra crash:
```
(gdb) bt
\#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
\#1 0x00007f4e4d3f7535 in __GI_abort () at abort.c:79
\#2 0x00007f4e4d3f740f in __assert_fail_base (fmt=0x7f4e4d559ee0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x7f4e4d9071d0 "master->owner == pthread_self()",
file=0x7f4e4d906cf8 "lib/thread.c", line=1185, function=<optimized out>) at assert.c:92
\#3 0x00007f4e4d405102 in __GI___assert_fail (assertion=assertion@entry=0x7f4e4d9071d0 "master->owner == pthread_self()", file=file@entry=0x7f4e4d906cf8 "lib/thread.c",
line=line@entry=1185, function=function@entry=0x7f4e4d906b68 <__PRETTY_FUNCTION__.15817> "thread_cancel") at assert.c:101
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
\#5 0x000055b40c291845 in zebra_dplane_shutdown () at zebra/zebra_dplane.c:3274
\#6 0x000055b40c27ee13 in zebra_finalize (dummy=<optimized out>) at zebra/main.c:202
\#7 0x00007f4e4d8d1416 in thread_call (thread=thread@entry=0x7ffcbbc08870) at lib/thread.c:1599
\#8 0x00007f4e4d8a1ef8 in frr_run (master=0x55b40ce35510) at lib/libfrr.c:1024
\#9 0x000055b40c270916 in main (argc=8, argv=0x7ffcbbc08c78) at zebra/main.c:483
(gdb) down
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
1185 assert(master->owner == pthread_self());
(gdb)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Put the code to free the data held by a nhg_ctx
in nhg_ctx_free() as well. We do it similiarly for
the dplane_ctx.
Let nhg_ctx_fini() be any other routines that need to
be handled before freeing.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
SA warned us lookup could be NULL dereferenced in some
paths. Handle the case where we are passed a NULL
nexthop before we try to copy it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
