Give the FRR users some examples of gRPC usage in scripts to let them
start experimenting with the new configuration interface provided by
YANG/northbound.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Document the commands `addpath-tx-all-paths`,
`addpath-tx-bestpath-per-AS` and attempt to provide an useful
explanation.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This code was deprecated in 5.0 and removed after a year.
It has not been in the code base and we forgot to update the
doc.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The documentation for this command was missing. Add a little
bit of data for people in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* add a vrf sub-command `[no] ipv6 router-id X:X::X:X`.
* add command `[no] ipv6 router-id X:X::X:X [vrf NAME]` for backward
compatibility.
* add a vrf sub-command `[no] ip router-id A.B.C.D` and make the old
one without `ip` an alias for it.
* add a command `[no] ip router-id A.B.C.D [vrf NAME]` for backward
comptibility and make the old one without `ip` an alias for it.
* add command `show ip router-id [vrf NAME]` and make
the old one without `ip` an alias for it.
* add command `show ipv6 router-id [vrf NAME]`.
* add ZAPI commands `ZEBRA_ROUTER_ID_V6_ADD`,
`ZEBRA_ROUTER_ID_V6_DELETE` and `ZEBRA_ROUTER_ID_V6_UPDATE`
for deamons to get notified of the IPv6 router-id.
* update zebra documentation.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Matching by dscp may now also be specified by its standard codepoint
(provided it has one), such as `cf0` or `af11`.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Extend PBR maps to discriminate by Differentiated Services Code Point and / or
Explicit Congestion Notification fields. These fields are used in the IP header
for classifying network traffic.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
DSCP: differentiated services codepoint
ECN: Explicit Congestion Notification
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Saurav Kumar Paul <saurav@cumulusnetworks.com>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
The tests work with the default settings of BFD meaning that bfdd is
able to recognize a 'down' link after ~900ms so a route recovery should
be visible in the RIB after 1 second.
In the current state only IPv4 is used (when using IPv6
autoconfiguration) within BFD, even though the recovery also affects
IPv6 routes. This is different to the current state of ospfd/ospf6d in
combination with BFD since both IPv4 and IPv6 sessions are used there.
The following topology is used:
+---------+
| |
eth-rt2 (.1) | RT1 | eth-rt3 (.1)
+----------+ 1.1.1.1 +----------+
| | | |
| +---------+ |
| |
| 10.0.2.0/24 |
| |
| eth-rt1 | (.2)
| 10.0.1.0/24 +----+----+
| | |
| | RT3 |
| | 3.3.3.3 |
| | |
(.2) | eth-rt1 +----+----+
+----+----+ eth-rt4 | (.1)
| | |
| RT2 | |
| 2.2.2.2 | 10.0.4.0/24 |
| | |
+----+----+ |
(.1) | eth-rt5 eth-rt3 | (.2)
| +----+----+
| | |
| | RT4 |
| | 4.4.4.4 |
| | |
| +----+----+
| 10.0.3.0/24 eth-rt5 | (.1)
| |
| |
| 10.0.5.0/24 |
| |
| +---------+ |
| | | |
+----------+ RT5 +----------+
eth-rt2 (.2) | 5.5.5.5 | eth-rt4 (.2)
| |
+---------+
Route recovery is tested on RT1. The focus here lies on the two
different routes to RT5. Link failures are generated by taking
down interfaces via the mininet Python interface on RT2 and RT3.
Hence routes are supposed to be adjusted to use RT3 when a link
failure happens on RT2 or vice versa.
Note that only failure recognition and recovery is "fast". BFD
does not monitor a link becoming available again.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces
the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB
could be configured through CLI or Yang.
Adjacency-SID are now using this SRLB for label allocation. SRLB could also
be used for SID-Binding (e.g. LDP to SR).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
A new config option `--disable-version-build-config`
allows you to show short version string by dropping
"configured with:" and all of its build configs
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
